Iphoto 11 compatability with gmail. Server not recognising user or password when I attempt to share photo,s

When attempting to email photo,s using iphoto this message appears; server not recognising user or password. i have checked preferences and may gmail a/c is listed as default sender. Any help out there for me? PS It was fully functional before I installed Home and office for mac.

Upgrade to v9.4.1 or
Trash the HP Plug in from /Library/Application Support/iPhoto
There are two libraries where this plugin might be
HD/ Library
and
HD/Users/Your Name / Library
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)

Similar Messages

Server does not recognise user and password

unable to email photos. server does not recognise user and password

This is a quite interesting issue. Perhaps it may help if we start by trying to understand what caused the issue and then we will consider how you might recover from it.
One of the things that Cisco wanted to do as they released version 15.0 was to improve the security of passwords in IOS. So they designed and implemented a new "type 4" password which they intended to replace the previous "type 5" password used for enable secret or for username secret passwords. So in those versions of 15.0 if you configure enable secret or username secret for passwords the IOS would create the new type 4 password.
Then you reacted to some problem and loaded an older version of IOS. 12.2(55) does not understand the type 4 passwords. So as your switch booted on this version of code and it read lines in the startup config that had type 4 passwords it did not understand them and marked them as invalid input. So the result is that your switch does not have an enable secret and perhaps usernames do not have passwords.
I do not know if you will be able to recover without doing password recovery but I have a suggestion which you can try. See if you can login on the console. It may depend on how your switch was configured whether it will let you do that and whether it will let you get to enable mode on the console. The default behavior was to allow the console to get to enable mode without a password. If your configuration includes aaa authentication enable default enable then the console may not work and in that case I believe that your only alternative will be password recovery.
HTH
Rick

Not recognising user login password MacBook Pro

Hey people hope you can help! After installing new hard drive and transferring time machine data, my MacBook Pro is Refusing to recognise my password even after I have reset it using the startup disk. I enter user password on my admin user account and it goes blue briefly as if beginning load but the. Returns back to selecting user and entering password. It really strange as it does not say password incorrect its almost like it trying to load but can't. Any suggestions please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Mac does not recognise my admin password when I try to install updates

I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
http://support.apple.com/kb/TS1278

My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

Hi Mick2291,
Thanks for visiting Apple Support Communities.
I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
Apple TV (2nd and 3rd generation): How to restart your Apple TV
http://support.apple.com/kb/HT3180
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Best Regards,
Jeremy

What do I do when IPhoto says "mail server does not recognize user name/password?

What do I do when IPhoto says "mail server does not recognize user name/password?

Fixed by resetting my password to Apple's new protocol! In my case, I had to add a capitol letter.
Reset here:
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard

Hi,
Is SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard.
In volume licensing portal Windows Server 2012 R2 Standard is not provided in the list of OS supported for SQL server 2012.

Hi Ajit,
Besides other post, please also note that
Service Pack 1 or
a later update is needed for the support of SQL 2012 on Windows Server 2012 R2.
For more details about how to use SQL Server in Windows Server 2012 R2, please review the following KB article.
http://support.microsoft.com/en-us/kb/2681562
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have check all mail settings for ID and password.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.

In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN

Adobe flash player will not recognise my apple password? Can any one hel?

adobe flash player will not recognise my apple password.

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Facebook login does not add user and password to the account

Hi
PROBLEM
Facebook login button does not create user and password for login.
We wish we could ONLY use facebook login button to allow users the account creation on our campus.
So we disabled the user creation webform.
And only out facebook login buttons that students can only login to our campus using their fb account in the hope that they dont share it (hopefuly)
AND
This is a problem BECAUSE if I publish events and capture leads ALL those users have problems creating their user account latter.
CASE IS
1.- A person comes to my website and leaves a comment. This creates a register with their email and name.
2.- Days later this same user comes back and clicks a facebook user login/ account creatio.
2.1 The page now shows that user name as it comes from Facebook. BUT NO USER AND PASSWORD information added to that person's register in the CRM.
So
If some one leaves a comment, register to our mailing list FIRST
and SECOND tries to create his account afterward. IT DOESNT WORK
Any ideas?
Thank you so much in advance.
P.S.
This is the web page. If you 1) Leave first a comment and 2) click on fb login/create account button the profile renders unusable. I have to delete it so you can create your user
http://www.zuiliuniversity.com/nivel-2-curso-especializado-proyecto-de-marketing-digital

if you are only using 2 snmp commands to let the switch pull the config from your tftp server, than there are some commands missing ...
have a look here to get a documentation about this process:
https://supportforums.cisco.com/docs/DOC-1860
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml

HT1567 Itunes 10.6.1.7 is not recognising an Audio CD when inserted in the drive. This means I connot import any CD's. What could be wrong?

iTunes 10.6.1.7 is not recognising an audio CD when inserted in the drive. This means that I cannot import CD's. It used to work but since installing other software iTunes does not see the audio CD and will not open the drive when "eject disc" is selected from the controls menu.

Check the drive letter of your CD drive. iTunes doesn't seem to work properly with CD drives if they are mapped to the letters A or B. Use Disk Management tool in windows to change to a different letter and this will fix it (if this is the cause!).

When I try to share photos on Iphoto a windo comes up and says "The email server didn't recognize your usernme/password combination. Where do I go to fix this?

When I try to share photos on IPhoto a window comes up and says "The server didn't recognize your username/password combination." Where to I go to fix this?

Hey, click on Iphoto on the top bar.
Then go to preferences.
Go to accounts, and change your user name and password for the email.
Hope this helps.

2nd gen appletv says movies not authorised/ user name/password not accepted on appletv

This is so weird.
I have home-shared and can play all un-DRM stuff e.g. music and personal movies. However, TV shows and Movies downloaded from iTunes won't play. It keeps asking me to authorize my computer on iTunes. The computer is however authorised and just to be double sure I have authorised multiple times (and get the message "this computer is already authorised"). I also de-auth'd and re-auth'd. This is all after updating both the AppleTV and iTunes to the most up-to-date versions.
This is all happening with a Win7 PC so I home-shared from my Mac as well and exactly same thing. One other strange thing: I tried to sign in to iTunes on the AppleTv, just in case thats what is needed to get these things to play. It tells me my user name/ password is incorrect. This is the weirdest because it is the exact user name password I used to home-share and even buy the last TV show. I have repeatedly entered it so I am dead sure I have not entered it wrongly.
Has anyone encountered and fixed something like this? Cold rebooting also has no effect at resolving.
Thanks

My id/password combo is ok - 100% sure.
Took the bold step of resetting to factory defaults. Now it doesn't even sign in to itunes sharing from the AppleTV anymore: says id/password wrong. It was only iTunes saying this before. So now I can't even access stuff on my PC anymore. Yet at this very moment I'm downloading a movie on iTunes on the computer meaning I will only be able to see it on the computer.
Quite disappointed in Apple!

Iphoto 11 compatability with gmail. Server not recognising user or password when I attempt to share photo,s

Similar Messages

Maybe you are looking for