IPhoto 11 - Edit tools fail after initial use of program

Running 10.6.8 (all updates complete) on new MacBook. Began editing newly imported photos  - edit features failed after first 50 photos. I have tried...
* updated all Mac Software
* deleted user iPhoto preferences, emptied trash, reopened
* repaired iPhoto library, etc....
Has this happened to anyone else? Any suggestions for repair/recovery?

Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it does then a reinstall of iPhoto seems warranted. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
Click to view full size
Then install iPhoto from the disk it came on originally.
OT

Similar Messages

  • In the iPhoto editing tools, what is the purpose of the tool "Definition".  What does it do?

    In the iPhoto editing tools, what is the purpose of the tool "Definition".  What is it used for? I did an iPhoto Book; a few photos were a little "off".

    It quite literally adds definition to the photo. Don't ask my the technical procedure for this, but it makes more details visible in the photo.

  • Datasocket server seems to fail after continuous use.

    The Datasocket server seems to fail after continuous use.  (Labview 7.1 on XP)
    I have a data acquistion system that collects data and presents it to the operator.  Then I have from 1-3 remote units that can connect via DS to the acquistion unit to view the data.  As a general rule things work dandy!  I have the data published from the front panel of one VI and subscribed to by the remote VI(s).  However it seems that after some indeterminent time the DS just stops publishing data and my remote units go into alarm indicating that they can no longer get data.  If I shutdown and then restart the DS server then things seem to clear up and work again.
    Anyone seen this type of problem?  Unfortunately my app is pretty large and it acquires data from 26 field units so its not real practical to post the code!
    I wonder if using the DS VI's would change performance as opposed to the front panel publishing/subscribing that I currently do?  Or can DS just not handle the load, should I change to a TCP/IP handshaking?
    Thanks!
    ~Gold

    Here's the basic piece of code. The outer case structure was used because that program already had some DS related stuff and I wanted to wait before I start checking to avoid disturbing it. I added the array at the bottom for some logging so I could check when it happened, but I haven't been called for it since, so that array has proved unnecessary.
    Try to take over the world!
    Attachments:
    DSerror.JPG ‏56 KB

  • What do I have to do to bring iPhoto up so that I can use the program?

    This morning we received a software update for iPhoto (36MB) immediately after this download and installation we received a second software update for iPhoto (57.7MB). Shortly after finishing the second update I tried to open iPhoto to work on a slideshow of holiday activities.
    I went to:
    Dock > iPhoto
    Message: " The photo library needs to be upgraded to work with this version of iPhoto."
    upgrade ( I clicked on the upgrade button)
    "Loading photos... " " Examining Photo Library "
    Everything stopped.
    New screen: " There is a problem accessing one or more files in your iPhoto Library folder. >Finder, >iPhoto Library, >get info., ... check read/write permissions."
    I proceeded as directed. Permissions were all read/write for the iPhoto Library folder.
    I went back to iPhoto... repeat of problem.
    What do I have to do to bring iPhoto up so that I can use the program.

    Welcome to the Apple Discussions. What was updated and did you repair disk permissions after it was completed?
    As a first fix attempt download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now.  But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet   I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

    I am already paying a subscription for Adobe Acrobat XI Pro  Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

    Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

  • I have created a narration for a video, and it plays it while in the editer tools, but after saving it to my desktop, that version has no narration. can you help? Please.,

    I have created a narration for a video, and it plays it while in the editor tools, but after saving it to my desktop, that version has no narration , can you help...Please.

    timester
    What version of Premiere Elements and on what computer operating system is it running?
    How did you save your Timeline content which included the narration clip produced with the project's Narration Tool?
    Publish+Share/Computer/ and then what? And, what preset? And, for that preset, did you use the default settings of the preset
    or did you customize the preset under its Advanced Button/Video Tab and Audio Tab?
    What other audio was in the project - any on Audio 1 or Soundtrack? Did you get involved with Smart Mix at all?
    Let us start here. We will be watching for your follow up.
    Thank you.
    ATR

  • I'm trying to get a proper formatting for webpages in Firefox after I used a program to adjust settings

    I used a program called Slim Cleaner to erase some features such as cookies,web browsing for the sake of privacy. However, what the output now is from websites that I go to illustrates a listing of links rather than a pictorial which is what I had before. I tried using Internet Explorer when this happened and the webpage is as it should be. I tried a system restore to yesterday evening (120106) to see if that would fix the problem, but to no avail. I assume I changed a true statement to false when I did what I did. See Troubleshooting Information below. Also, I have an Epson Stylux NX-510 printer attached to the computer rather than the Lexmark 7600 which is what I had previously.

    You should be careful with using external programs to remove private data.<br />
    It is best to use build-in Firefox means via Clear Recent History
    *Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • T400 realtek wifi fails after short use, given IOMMU errors in dmesg

    Hello, thanks for reading.
    The title explains the problem pretty well.  I can connect to any given network just fine through wicd, but after a short bit of use the networking entirely stops and if I try to make any changes I get what I assume is a kernel panic and the whole system stops responding, short of the caps lock blinking.
    Relevant outputs include:
    dmesg:
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009
    Command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f36000 - 37fef4e4
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0]
    #3 [0037f36000 - 0037fef4e4] RAMDISK ==> [0037f36000 - 0037fef4e4]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [0001684000 - 000168414c] BRK ==> [0001684000 - 000168414c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 107 pages reserved
    DMA zone: 3830 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages at ffff880028035000, static data 82400 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047095
    Kernel command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8114824k/9371648k available (3628k kernel code, 1054712k absent, 201116k reserved, 1500k data, 484k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    NR_IRQS:768
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2527.220 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.04 BogoMIPS (lpj=8424066)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Counters: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic counters: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose counters: 3
    ... counter mask: 0000000700000003
    ACPI: Core revision 20090521
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5055.55 BogoMIPS (lpj=8423280)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    mce: CPU supports 6 MCE banks
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.59 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 741k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257200918.329:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15852
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 484k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    Switched to high resolution mode on CPU 0
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    Switched to high resolution mode on CPU 1
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    EXT4-fs (sda3): write access will be enabled during recovery
    EXT4-fs (sda3): barriers enabled
    EXT4-fs (sda3): delayed allocation enabled
    EXT4-fs: file extents enabled
    kjournald2 starting: pid 596, dev sda3:8, commit interval 5 seconds
    EXT4-fs: mballoc enabled
    EXT4-fs (sda3): orphan cleanup on readonly fs
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30918
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30917
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30916
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30915
    EXT4-fs (sda3): 4 orphan inodes deleted
    EXT4-fs (sda3): recovery complete
    EXT4-fs (sda3): mounted filesystem with ordered data mode
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    iTCO_vendor_support: vendor-support=0
    Monitor-Mwait will be used to enter C-1 state
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Monitor-Mwait will be used to enter C-2 state
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Non-volatile memory driver v1.3
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ACPI: AC Adapter [AC] (off-line)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ricoh-mmc: Controller is now disabled.
    ===============>NIC 8192SE
    uhci_hcd: USB Universal Host Controller Interface driver
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Dot11d_Init()
    IRQ 17
    ACPI: WMI: Mapper loaded
    ACPI: Battery Slot [BAT0] (battery present)
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (33 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (42 C)
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    thinkpad_acpi: radio switch found; radios are disabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    Registered led device: tpacpi::thinkvantage
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    [drm] radeon default to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    radeon 0000:01:00.0: power state changed by ACPI to D0
    radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    radeon 0000:01:00.0: setting latency timer to 64
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    [drm] radeon: Initializing kernel modesetting.
    [drm:radeon_driver_load_kms] *ERROR* Failed to initialize radeon, disabling IOCTL
    radeon 0000:01:00.0: PCI INT A disabled
    radeon: probe of 0000:01:00.0 failed with error -22
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-6: new high speed USB device using ehci_hcd and address 2
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    usb 1-6: configuration #1 chosen from 1 choice
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    Clocksource tsc unstable (delta = -76024863 ns)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input13
    EXT4-fs (sda3): internal journal on sda3:8
    EXT4-fs (sda4): barriers enabled
    kjournald2 starting: pid 1210, dev sda4:8, commit interval 5 seconds
    EXT4-fs (sda4): internal journal on sda4:8
    EXT4-fs (sda4): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda4): mounted filesystem with ordered data mode
    Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    GPIOChangeRF - HW Radio OFF
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    Save max pwr
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    eth0: no IPv6 routers present
    fuse init (API version 7.12)
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    GPIOChangeRF - HW Radio ON, RF ON
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    =========>r8192_wx_set_scan(): IPSLeave
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    rtl819xSE:==========>rtl8192_down()
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Save max pwr
    rtl819xSE:<==========rtl8192_down()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Linking with Wireless Network,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:65,assocresp_ies_len:53
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c,
    Associated successfully
    ============>normal associate
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    alg name:TKIP
    rtl819xSE:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr00:1c:10:cf:29:72
    rtl819xSE:=========>after set key, usconfig:8008
    alg name:TKIP
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:1, KeyIndex:1, KeyType:2, MacAddrff:ff:ff:ff:ff:ff
    rtl819xSE:=========>after set key, usconfig:8009
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:10:cf:29:72
    wlan0: no IPv6 routers present
    eth0: no IPv6 routers present
    e1000e: eth0 NIC Link is Down
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    eth0 Link encap:Ethernet HWaddr 00:24:7E:6F:CF:41
    inet6 addr: fe80::224:7eff:fe6f:cf41/64 Scope:Link
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    RX bytes:240 (240.0 b) TX bytes:936 (936.0 b)
    Memory:fc200000-fc220000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:16 errors:0 dropped:0 overruns:0 frame:0
    TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2160 (2.1 Kb) TX bytes:2160 (2.1 Kb)
    wlan0 Link encap:Ethernet HWaddr 00:26:5E:EA:64:78
    inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::226:5eff:feea:6478/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17 Memory:ffffc90000068000-ffffc90000068100
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
    00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
    15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
    15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
    15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
    15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
    15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
    15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
    This line:
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    I get a whole bunch of times after it first appears in dmesg.  I've googled this error without the address on the end and it seems there isn't much of a solution that I'm aware of.  I don't know what to do from here!  Guidance is so very appreciated.

    Same here, I've tried without wicd.  The problem reproduces exactly the same.
    Also, I've googled around and it seems like this is a recurring bug. 
    I tried passing iommu=force to the kernal during boot and from there, the card works slowly.  I also get a different error array in DMESG from there.  The end of it is as follows:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x100000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f4a000 - 37fef0b7
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037f4a000 - 0037fef0b7] RAMDISK ==> [0037f4a000 - 0037fef0b7]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [000082e000 - 000082e14c] BRK ==> [000082e000 - 000082e14c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 1688 pages reserved
    DMA zone: 2249 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880028035000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045514
    Kernel command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2526.745 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8100960k/9371648k available (3409k kernel code, 1054712k absent, 214984k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.05 BogoMIPS (lpj=8422483)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5056.56 BogoMIPS (lpj=8423300)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10111.61 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 660k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257365076.373:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15825
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 250069680 512-byte hardware sectors: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs: barriers enabled
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda6 with ordered data mode
    kjournald2 starting: pid 601, dev sda6:8, commit interval 5 seconds
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 141
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: AC Adapter [AC] (off-line)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    ACPI: WMI: Mapper loaded
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    ACPI: Battery Slot [BAT0] (battery present)
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (46 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (50 C)
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ===============>NIC 8192SE
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    Monitor-Mwait will be used to enter C-3 state
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    ricoh-mmc: Controller is now disabled.
    Dot11d_Init()
    IRQ 17<6>Non-volatile memory driver v1.3
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input11
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usb 1-6: new high speed USB device using ehci_hcd and address 3
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
    Clocksource tsc unstable (delta = -250245903 ns)
    usb 1-6: configuration #1 chosen from 1 choice
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    EXT4 FS on sda6, internal journal on sda6:8
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1750, dev sda2:8, commit interval 5 seconds
    EXT4 FS on sda2, internal journal on sda2:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda2 with ordered data mode
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1751, dev sda7:8, commit interval 5 seconds
    EXT4 FS on sda7, internal journal on sda7:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda7 with ordered data mode
    Adding 498920k swap on /dev/sda5. Priority:-1 extents:1 across:498920k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 4:0:0:0: [sdb] 15753216 512-byte hardware sectors: (8.06 GB/7.51 GiB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Linking with Scytale,channel:6, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
    ===>ieee80211_associate_procedure_wq(), chan:6
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x4, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:81,assocresp_ies_len:105
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c, <6>Associated successfully
    ============>normal associate
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:0e:41:2b:e1
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    wlan0: no IPv6 routers present
    rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    When I pass iommu=off, it slows to unusable but does not cause a kernel panic.
    Last edited by sharpie (2009-11-05 03:32:39)

  • Open Administrator tool failed after Java Add-in

    Hi all,
    After done my J2ee add-in installation into ABAP ECC5 system, my central services instance was started successfully.
    And i could connect to Visual administrator with J2ee_admin user.
    In log "dev_disp" located in /usr/sap/<instance>/work directory" as shown attached below, my j2ee server was start successfully
    http://img2.freeimagehosting.net/uploads/8c9694a7cc.jpg
    However, I couldn't access J2ee Administrator tool in Web browser with the following URL as I pretty ensured that correct parameters was inserts.
    HTTP://<hostname>:<port>
    http://img2.freeimagehosting.net/uploads/1bafe7a701.jpg
    Please guide me regarding this issue.
    Thousand thanks.
    Terry
    Edited by: Tow Terry on Apr 22, 2008 1:46 PM

    dev_dispatcher logs
    [Thr 1473899440] Fri Apr 25 18:00:53 2008
    [Thr 1473899440] JLaunchISetHttpPort: set http port 50000
    [Thr 1446415280] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 1505602480] Fri Apr 25 18:00:58 2008
    [Thr 1505602480] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 1490279344] Fri Apr 25 18:01:01 2008
    [Thr 1490279344] JLaunchISetP4Port: set p4 port 50004
    [Thr 1463331760] JLaunchISetP4Port: set p4 port 50004
    [Thr 1500847024] JLaunchISetP4Port: set p4 port 50004
    [Thr 1498733488] Fri Apr 25 18:01:22 2008
    [Thr 1498733488] JLaunchISetP4Port: set p4 port 50004
    [Thr 1507187632] Fri Apr 25 18:01:44 2008
    [Thr 1507187632] JLaunchISetHttpPort: set http port 50000
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    SMICM details
    HTTP Application Server Handler
    ABAP Server operational        = TRUE
    J2EE Server configured         = TRUE
    J2EE HTTP port                 = 50000
    J2EE HTTPS port                = 50001
    J2EE Server operational        = TRUE
    Default root access handler    = J2EE
    URL Prefix Table loaded        = TRUE
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    my j2ee engine was up and running as I can log on to visual administrator.
    However, i still couldn't access http://localhost:50000 web j2ee application.
    Is that we need to configured somethings before access to web application?
    Thanks

  • CS6 - Tools Freeze after 1st use

    CS6 - After using one of the tools (select, crop, healing) 1st time, I further use or ability to change (from Patch to Red Eye Removal) can't be done. I have to close CS6 and reopen. I can save, and use filters, but not of the "left side" tools.

    I should mention I am using Windows 7 on a Samsung Serios 7 laptop that uses a quad core Intel i7 processor with 8 gig of ram.
    Attached is an image where I try to demonstrate with serious problem. I've opened the image. Created a white rectangle by using the select rectangle tool. Next I want to switch from the "healing" tool to the "patch" tool. I right click to open the list of 4 tools and at that point I can point to the "patch" tool with the mouse cursor, but can't select it. This is the case with all the other tools in the tool bar as well.
    I have to save the image. Close PhotoShop and restart, then select and use "patch".
    Your help would be greatly appreciated.
    Regards,
    Frank
    PS: My original message has grammar errors, I apologize.

  • Time Machine backups fail after initial backup in Yosemite

    After upgrading from Mavericks to Yosemite, I was able to run one backup to my trusty USB drive.  Subsequent backups all start with "Preparing backup", and will write roughly 900KB to disk (or so it says) and then fails.  I created a Time Machine-compatible network drive on my Drobo 5n, and again, the initial backup is successful, and subsequent ones fail.  This is concerning and infuriating.  I'm hoping someone out there has encountered this problem as well.
    Please note: this is regarding backups only.  I see a handful of discussions about not being able to perform restores in Yosemite, but that is not my issue.

    Same here.
    From Time Machine Buddy app:
    Starting manual backup
    Total content size: 424.3 GB excluded items size: 21.01 GB for volume Macintosh HD
    Found 2439814 files (403.3 GB) needing backup
    424.87 GB required (including padding), 250.63 GB available
    Deleted backup /Volumes/Backupmac/Backups.backupdb/.df. (3)/2014-10-23-120445.inProgress/F8CFC567-7E6E-49B0-B366-88DF31DAF49B containing 4 KB; 250.63 GB now available, 424.87 GB required
    Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
    Deleted 1 backups containing 4 KB total; 250.63 GB now available, 424.87 GB required
    Backup date range was shortened: oldest backup is now Oct 23, 2014
    Backup failed with error 7: Not enough available disk space on the target volume.
    It wants to do a full backup. Fine... so why doesn't it just delete more of the old backups to do so? I don't want to wipe the backup drive and start over now, but that seems like the only way to go.

  • My iPhoto photo library disappeared after I used a SanDisk Cruzer Fit USB Flash Drive

    Hi! Not sure if these 2 things are connected, but I bought a SanDisk Cruzer 32GB USB Flash Drive. I dragged my documents over and copied them on to the flash drive. I didn't have iPhoto open. I didn't drag any applications, photo library folders, or anything else over to the flash drive. I just dragged over 3 file folders of work and personal documents (MSWord, Excel, etc.) over to the flash drive. It took some time to copy all my documents over, so I left it overnight.
    The next day, I decided it might be a good idea to also back up my photos from iPhoto. Interestingly enough, nearly all my photos had been deleted--save for photos from the last 3 - 4 weeks or so. That's right, a decade worth of photos were gone. I went online, Googled the problem, looked through this community and verified that I did not accidentally import one library into another or move (or delete) the backup iPhoto Library folder or anything. I even checked the flash drive. Nothing. Just the 3 folders worth of documents that I'd copied over.
    Has anyone heard of a flash drive somehow corrupting or deleting photos from an iPhoto library?
    I'm stumped. I have dug through other regular folders where I'd stashed some .jpgs so I could burn a CD for family, so I have put back about 338 photos from a library of thousands of images (some which are, of course, irreplaceable). The irony is that this last year, I'd been scanning in photos from actual physical photo albums to digitize them and have them handy on iPhoto... not knowing that they would disappear. And, of course, the double-irony is that I was using a thumb drive to back up my photos when they disappeared. If I wasn't so bummed, I'd be laughing right now.

    Thanks for the helpful thoughts LarryHN. I'm having a Mac guy look at my MacBook Pro in the next day or so to see what he can find out. I described the issue on the phone... and like you, he said that saving my documents to a thumb drive shouldn't affect my iPhoto library.
    One reason I bought the thumb drive was to back up my iPhoto library, but the time I got to that, it was already gone. I've thought of getting Time Machine (and have checked out other systems), but the reviews are so mixed, I'm dragging my feet on coughing up the cash right now.
    When I launch iPhoto, I only see the last few weeks' worth of photos. Oddly, photos I imported 3 weeks ago appear, but are in a folder dated November 2012--when I know I took those and imported them in January 2013. So that's weird...
    When I got to iPhoto Library, I have an Auto Import folder with nothing in it. "My Pictures" folder has nothing as well. I did hold down the option key while opening up iPhoto, but only my recent library (a few weeks' worth of photos) appears. I'm using iPhoto 2011 (6.2.3). I can only hope my Mac guy can help...

  • CC patch fails after initial install

    I have a new laptop (Win 8) and am installing CC apps. After downloading the apps, the app manager gives me the following error message:
    Installation succeeded, but a patch failed.
    This behavior has been consistent for Dreamweaver, Photoshop, and InDesign. When I try to update afterwards, it simply said "Patch failed."
    Any idea what is going on and how to fix it?
    Thanks.

    Hi jefferymoulton,
    Welcome to the Community!
    Likely you will need to review your installation logs similar to your previous discussion at http://forums.adobe.com/thread/1326319.  Please see Error U44M1I210 | Install updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-up dates-ccm.html which discusses the steps you have performed so far.  The next step will be to review the installation log files to determine the exact error you are receiving.
    Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc. html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.
    -Ankit

  • Text Tool Fails After Constrained Crop

    I'm making some large buttons for a project and used the constrained crop to standardize the buttons to 200x158. While PS lets me select the text tool, making a new layer, and locate it on the image, the text does not appear in the layer when typed. When I clicked the move tool the layer name changed to the text I had typed but it still did not show in the layer. This behavior does not occur with an unconstrained crop. Is this a bug or am I missing something?
    PS CS4 on WinXP-SP3 no OpenGL
    --Allen

    You have probably acquired a strange setting in the Character panel.
    Try resetting it from the drop-down menu top-right of the panel.

Maybe you are looking for