Iphoto 11 jumping and scrolling to fast
When scrolling photo page, it's jumping eight or so events down when using arrows - I want to do one at a time. Thanks for any help.
You can't do that. The Library cannot be sorted manually.
Make Albums, they can.
Similar Messages
-
Elements organizer scrolls too fast and jumps when an image is selected?
Why does elements 12 organizer on new mac scrolls too fast and jumps all over?
I have found this to be a problem as well. Like other products, the scroll speed should start slow, and only speed up if the user moves the cursor further outside the panel.
Vista on Dell XPS 710. -
When I reorganize a thumbnail in an album it scrolls too fast to put it where I want. In some cases I can resize the thumbnails so I don't have to scroll. But some times I have too many photos in the album to do that.
Any one else have this problem?
Any solution?Yuck ... this has also been a problem in iPhoto 5. I see the same insane scrolling whether I'm drag-and-dropping one roll into another, or some photos from one roll into another. Still looking for a solution -- can we just modify a property in a plist or xml file of iPhoto? Larry.
-
I have posted "submit" twice and keep getting requests to submit again. Now being asked to write a summary! Here we go. I have iPhoto 08 and am happy with it. Don't want to upgrade. But suddenly when I click on an event, instead of getting all the photos, I just get a large version of one photo and cannot move on to the others. The right arrow will not move it and the photo just jumps around.
Note the slider bottom right of the iPhoto Window. Drag it left.
-
T440s UltraNav Touchpad Scroll Too Fast and Jerky
Wife purchased a T440s in November. Arrived December. I installed Windows 8.1 from scratch, and it worked. Then on Friday, Jan 31st 2014, I ran the driver update tool from Lenovo. It upgraded the driver to 17.0.12.60. She noticed that scrolling became much more unreliable. She could sometimes not get docs/webpages to scroll until she clicked around the page. Then she could get scrolling to work again. Also, scrolling speeds increased _dramatically_ to the point it was unusable. Also, the scrolling was quite jerky. So I rolled the driver back to 17.0.12.56 and immediately she noticed a difference. She was able to successfully scroll again and scrolling wasn't too fast and much smoother.
Others have noticed this on Notebook Review's forum. I'm going to ask those people to come here and add their comments.
Can Lenovo please fix the UltraNav driver? Thanks!Yes, I experienced the same problem. Two finger scrolling became unusable (way too fast and erratic) after an upgrade to UltraNav 17.0.12.60. Reverting back to 17.0.12.56 fixed the issue.
Please fix this in the next version. Thank you! -
every time I open a new safari page and scroll down it jumps back to the top of the page. Happens super inconsistently and not on every web page. Tried all the dum dum moves like restarting computer and changing scroll direction in track pad. Anyone else have a similar issue? mac book pro, newest version of OSX. Thanks all!
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
My cursor jumps around while typing and scrolling. i've tried different mice, different usb ports
I have a new HP pavillon HPE windows 7. My cursor jumps around while typing and scrolling. I've tried different mice and usb ports.I contacted HP support and was instructed to do several things to the mouse and pointer, nothing helps. I installed in usb port in the rear of the computer that helped for a short time, then it went back to jumping around. So what else can I try. Thanks
I have to admit I am baffled. I understand and have seen the issue happen on laptops before, but for the issue to be happening on a desktop strange. I can even understand a wireless mouse, however yours is wired.
Microsoft has a tool called Mr Fix it. It scans the problem area and attempts to fix whatever is wrong. It's worth the shot in this case to see if it helps resolve the mouse issue.
Tips for solving problems with USB devices
The tool can be downloaded by clicking the button under Step 1. Run the tool and let me know the results.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Compare Bluray and Dvd Chapters and Scrolling still text
Question 1:
Using PremierePro CS5 to set some Encore-Markers and DynamicLink to Encore to create menu:
Using the same project, the behaviour is quite different:
for Dvd : Encore-markers behave like Chapters, so I can use the player remote control to go to next chapter (even it is not defined in the menu)
that is very handly function.
for Bluray : Encore-markes behave like Titles and not Chapters, so I cannot use the player remote control to jump to next Encore-markers
I just looking for references to understand and do the correct ajustments.
Thanks
tt
Question 2:
Using PremierePro CS5 to add a still picture and scroll it up in slow motion:
Using the same project, I understand that Bluray is far better than DVD:
for Bluray : the scrolling of the still picture is smooth (it's very pleasant with texts too)
for Dvd : the scrolling is jumpy (texts are dizzy and not readable)
Is there any fix for that (.....something like PremierePro option to smooth it out a little (result little burry) or ... something like ...deinterlacing ?)
Thanks
ttPOINT 1:
I will skip DynamicLink for circumventing some issues for sure, but it is so handy and makes me lazy to do things fast.
So far I am using DynamicLink for updating still images in menu with Photoshop and it's working fine.
Also I have tried sucessfully modifying some assets using AfterEffect. Yes, there are ressources demanding since I have a skinny 12 Gigs RAM.
POINT 2:
I have to be more specific in comparing Encore-Bluray and Encore-Dvd (I am not comparing HD with SD).
I just want to see the big picture comparison (equivalent between Encore-Bluray and Encore-Dvd) instead of "TRY-AND-SEE"
Let me explain:
1. Encore-Marker set in PremierePro-CS5 is consider as Chapter in Encore-Dvd)
2. The final DVD created: I can use the remote control to jump to next Chapter even the Chapter is not referenced anywhere in Encore-Dvd
3. Encore-Marker set in PremierePro-CS5 is consider as Title in Encore-Bluray) (the same Encore-Marker)
4. The final Bluray created: I cannot use the remote to jump because there is only one Chapters but many Titles.
When I am on the last step, of Encore-CS5-Build-Dvd or Encore-CS5-Build-Bluray, i expect to get the same result when playing the Bluray of Dvd
with the Player (Home DVD Player or Home Bluray Player and absolutely no PC )
WHAT ELSE IS DIFFERENT BETWEEN THOSE TWO FORMATS? for the same project in ENCORE-CS5
(I need that information to explain to the end users)
for now, I just try-and-see and take notes.
tt -
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
-
I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
Please! I need an answer fast!!!!Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
When using i photo and trying to pull up individual photos - the photo will appear and quickly disappear only to be replaced by a black screen with a white explanation mark. This happens with all of my photos. Has anyone had this problem and if so what can be done to fix it. I did not select this graphic to be added to my i photo pictures - the blace sign with the white explanation mark. Also, when scrolling down photos in faces some of my pictures disappear after a quick view.
Thanks for any help you can provide. It seems like something has gotten into my i photo picture account?The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I have lost my entire IPhoto Library and albums
IMac OS X V 10.6.8
I have lost my entire IPhoto Library and albums.
How do I restore?Your only other option is to stop using your Mac as soon as possible to minimize precious data being overwritten to, purchase a high quality, fast external hard drive, preferably a FIreWire external hard drive such as these
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
using an OS X Snow Leopard install disc, format this external drive as a Mac OS extended (journaled) formatted hard drive with a GUID partition scheme and then, using a install disc of OS X 10.6 Snow Leopard, install a fresh copy of OS X Snow Leopard and boot your Mac to that external hard drive by using the Startup Disc icon in the OS X System Preferences Panel to boot your Mac to the external hard drive. Once your Mac is booted and running from this hard drive, then use the OS X Software Update feature to update that version of OS X Snow Leopard to OS X 10.6.8.
Then, you need to do a web search for a Data recovery software such as Prosoft Engineering's Data Rescue and purchase, download, install and use this software to perform data recovery of your iMac's internal hard drive following the proper instructions on how to use the software. to recover the data.
Be advised that any images you recover will no longer be in a format that IPhoto will read and most like will just be a folder with just the images alone without any more linkage to the IPhoto library, but I am not completely sure about this as I always have redundant backups of my entire system.
If this seems all too complicated and complex to you, you need to stop using your Mac ASAP and either contact an Apple Store or Apple Authorised reseller/service/repair center to find out how much it will cost for them to recover your data and bring your Mac in for a more professional data recovery.
I still strongly advise you purchase a high quality, large storage, fast, external hard drive to use for future data backups to prevent such a catastrophic data loss from happening, again.
Every computer user SHOULD have, at least, one external backup drive and having redundant backup drives is even better. -
How do I share iPhoto library and Quicken info between accounts on the same
I'm on an iMac running Leopard and iPhoto 7.1.2 and Quicken 2004. My wife has one account and I have another. How do we share iPhoto libraries and Quicken input automatically across accounts on the same machine?
There are two ways to share iPhoto, depending on what you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg.
(Some people have had success putting the library in the Users/ Shared folder. If you do this make sure the file permissions are set to allow read/write access to everyone.)
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD -
Phone and contacts app freezes, becomes slow and scrolling is jittery
My setup:
iPhone 4 with iOS 4.2.1 (8C148)
I don't have 3G on my CIM (provider BASE.BE), I can only use WiFi to connect to internet.
I sync my gmail contact (mail and calendar are turned off) through the iPhone built in Exchange account connector.
Fetch new data is off, push is off, fetch set to manually, advanced schedule set to manual.
I only turn WiFi on once a day, when I'm home, sync contacts and then I turn WiFi off again.
Spotlight search is turned off.
Device runs fine, battery life is great (much better than my iPhone 3Gs), I have about 2700 contacts, no duplicates, updates in both directions, everything working perfectly.
Then without any warning, or even without any use of the phone, this happens:
1) The phone and contacts app becomes unresponsive for a few seconds, remains very slow, scrolling becomes jittery or freezes. When the symptom occurs both apps have this issue. I assume because both use contacts. Both apps don't crash, they just get very slow as if they were trying to do something heavy. This does not happen with any particular event, like getting a call or text message. This can happen even at night without any missed calls or text messages send or received. The symptom does not affect any other app. For example when I open the iPod app, scrolling though the long list of music is fast, without any freezing or jittery behavior, while the Phone and Contacts app is still very slow. The problem does not go away by itself. Hard rebooting the phone does not help. I assume the problem is not related to any purchased apps because this can happen when none of them are running.
2) The phone gets really hot.
3) The battery drains very fast. I can go from 100% to 0% in under 30 minutes.
4) CPU usage (use System App to measure) goes from < 20% to >75% or more.
I notice the symptom mostly when in the 1) phone app, or 2) I feel the phone heat up or 3) in the morning when the phone battery is almost empty when it was full the night before.
I can fix the problem by 1) turning on WiFi, opening the contacts app. Then I see the circular indicator in the top left hand corner turning round. This takes just a few seconds, to sync 1 or 2 contacts en when the indicator disappears, the problem is gone. Scrolling is fast again. Problem fixed. It can take a day or two and the problem comes back. Do sync trick again and problem gone again, and so on...
I can also fix the issue by 2) deleting my gmail exchange account, putting it back and syncing everything back. But like with solution 1) the problem will just returns after a few days.
I have even tried a full factory reset and manually putting all my apps back. But again, when I import my gmail contacts, wait a few days and problem returns.
I've been having this issue for a few months now and have done quit some research on the subject. I'm pretty sure I also had the issue on iOS 4.1 and possibly also 4.0. I did not have the issue in iOS3. I had the same problem on my iPhone 3Gs which Apple replaced. I thought the battery was dying. Now I bought an iPhone 4, same problem.
I purchased many system monitor apps to find out what process was causing the problem. The problem is that none of the apps I found report CPU or memory consumption per individual process. So I only know CPU goes from below 20 to 75% and more, but I can't pinpoint which app or process is doing the extra consumption. But it has to be one the standard built in iOS processes. I can see when what process started. And when the issue happens, I can hard reset and don't launch anything, and the problem is still there.
When iPhone apps crash and you connect your phone via iTunes the crash reports are put on your computer. I found these logs but because the contact and phone app don't crash I have found nothing interesting there.
I have not found a way to trigger the problem on purpose. I tried adding, changing deleting contact on my iPhone, none of these actions trigger the issue. The problem just appears at random.
I have also not found a way NOT to have the issue. I've tried not changing any contacts for a few days, but the problem still creeps up.
I have read dozens of threads on the internet and only this one comes close:
http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=62b2355d61d8e11 c&hl=en
I also found this interesting:
http://discussions.apple.com/thread.jspa?threadID=2567976
<Edited by Host>I solved this problem by restoring my phone to factory setting. I dint find any solution to this problem. Now instead of using "Google Sync" i use iTunes contact sync which does the same thing.
The key is not to use "Google Sync" when you restore your iPhone. Follow these steps:
1. Take back up of everything. Sync your contacts so your gmail has latest contacts.
2. Restore your iPhone. And set it as new iPhone instead of reloading everything from previous backup.
3. Sync everything using iTunes.
4. For contacts go to Info -> Sync Contact with -> you can set up gmail here and it will load all gmail contacts to your iPhone.
My iPhone is working perfectly after this. I hope it works on your too. -
I have an iMac5,1 with an intel processor. For the last month or so, whenever I play a video from an outside source - e.g. YouTube, the picture jumps and breaks-up. All of my software is up-to-date. Any thoughts on how to fix this problem?
You're welcome. As to checking speed go to http://speedtest.net/ and it will choose the closest server for you. BTW, whatever you do, don't click on the robot icon that says "Start Scan" or MacKeeper below that. Only use the speed test in the middle that has the button BEGIN TEST on it. It will run a download speed test first and then an upload speed test. The download test will give a much faster response.
Maybe you are looking for
-
after i upgrade my ASA 5505 from 8.2 to 8.4 i can no longer connect to ASDM. showing connecting ..... please wait for hours now
-
I pay my bills via West America bank Bill Pay system. At the end of the month, I print a report listing all bills paid for the specified time frame. I've been doing this for over a year using Firefox. This month, when I tried to print the report, the
-
I just got an Ipod touch for Christmas and I can't get the apps to work. I touch an app and it tries to initiate, but then if goes back to the home screen. How can I fix this?
-
Expert's, Please go through this scenerio. We are updating data from R/3 to ODS and then finally to cube.Now we have started loading Deltas.There are allready a huge amount of data both in ODS and Cube.One of the Delta which is available in ODS and
-
Hi Experts, I am creating a client for ALE execution ...as i am just a begginer i dont know whats the exact procedure .But i have used transaction SCC4(client maintance). 1. But the problem is that i am unable to retreive username & password for that