Iphoto 11 not displaying certain raw files
I have iPhoto 11 version 9.2.3. Everything used to be fine but, my RAW photos (CR2) from now 4/6/12 to 8/1/11 are fine, everything odler than that are not displaying and iPhoto gives me that exclaimation point triangle thing. I have done all the steps iPhoto gives to rebuild and it's not working. Any tips? Oh, I have tried iPhoto Mannager and it get's to a poiint and crashes. Fun times.
gives me that exclaimation point triangle thing.
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
As Library Manager is crashing the best thing is to restore from back up.
Regards
TD
Similar Messages
-
IPhoto will not import certain JPG files
I have just migrated to a 2012 Retina 15" MacBook Pro from a 13" MBP. I am using Mavericks 10.9.1 and iPhoto 9.5.1. The MBP is a 2.7gHz quad core with 16GB of memory and a 768GB SSD. I was trying to tidy up my hard disc and import some .jpg files from the output folder on my Capture One Session. iPhoto will not import certain jpg files but will import others. The message I get is as follows The following file could not be imported. The file is an unrecognised format. Then shows below for example /Users/xxxx/Pictures/Capture One Session/Output/L1000212.jpg.
I first tried creating a new library and importing to that with no success. I then rebuilt the database. I repaired permissions. I deleted the iPhoto.plist and its caches and restarted - no success. I then deleted iPhoto and reinstalled from App Store after deleting the plist and caches again. Still no luck. The .jpg files in question open perfectly in Photoshop CC and Preview. I tried altering them slightly and resaving but still they would not import. I reinstalled Mavericks - no improvement. If I reconvert the files from the original DNG's into TIFF files, then they will import to iPhoto
Any ideas anyone?
WilsonI just recorded an action in Photoshop CC to assign ProPhoto colourspace save and close. Then copied all the problem jpegs into a temp file and ran the action. With this super fast machine, It only took a few minutes to convert 500+ files and they have now all imported perfectly. I have changed my JPEG recipe to convert DNG's from embedded to ProPhoto.
Thanks again. Colourspace would never have occurred to me.
Wilson -
IPhoto 09 not reading Nikon raw files (.nef) properly?
Hey everyone. Over the weekend I upgraded from Leopard to Snow Leopard. Everything seemed to be working correctly until I started using iPhoto. Since the upgrade, I've noticed that photos that I imported from a Nikon D700 seem to look pixelated. I took it to a Genius Bar and the dude helping me was at a loss. He said to try and re-install Snow Leopard, which I did, and that didn't help. I went back and he upgraded me to iPhoto 09...also didn't help. He said he thinks that maybe it's Snow Leopard/iPhoto bug. He said that it's not reading the raw files correctly and seeing them as thumbnails. We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160. Weird. Also of note, both Photoshop and Lightroom view and display all photos correctly.
If anyone has any suggestions or solutions on how to fix this it'd be much appreciated!!Welcome to the Apple Discussions.
We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160.
That means that what you're seeing is the jpeg Preview inside the NEF and not the actual file.
My guess is that the your Camera Raw bundle is damaged.
Go to
HD / System / Library / Core Services / RawCamera.bundle
What version of this do you have?
Regards
TD -
IPhoto not displaying imported RAW files
I have the latest OS and iPhoto, and am importing Nikon RAW NEF files from my D7000 into iPhoto...Yes, the OS sees/opens the files, iPhoto does as well, when importing...but afterwards I go to Events and all I get are black boxes with white dotted outlines. If I go to edit mode, it shows thumbnails below, but I get a triangular exclamation point symbol where the photo should be. The event does show a photo count, and even shows the meta data info from each photo...but no photo image! Help...
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Since changing my little everyday camera to a new Nikon Coolpix P7100 iPhoto cannot import any of the raw files(.NRW),says it does not recognise them.
I have updated iPhoto to the latest version(9.2.1) but still cannot open them.
Any ideas pleaseThe raw from the P7100 is not supported at this time.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
iPhoto menu -> Provide iPhoto Feedback -
Bridge CS3 Does Not Display Pentax PEF files
Hi,
I am running Vista and have Bridge CS3 installed on my Notebook. I updated Bridge to v 2.1.1.9 and have added Camera RAW 4.5. My problem is that Bridge does not display Pentax RAW files from a K20 camera (its on the supported list). DNG and JPG files show correctly. Bridge only shows a PEF Icon for each image. When you double click on the Icon, the file opens in Camera RAW 4.5 correctly and also in Photoshop CS3.
Can anyone tell me what I need to do to see the PEF images in Bridge?
Thanks
KeithRevisit the download page, look at the instructions, and make sure you unzipped ACR to the correct folder, and you don't have an ACR in two places.
-
my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW files?
iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.
-
I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin -
iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?
Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Aperture 3.1.1 does not import Nikon RAW files from Nikon Coolpix P7000
Hi,
I'm running Aperture 3.1.1. The problem is that it will not display Nikon RAW (NRW) files from the Coolpix P7000.
Recently, a compatibility update was published for the Coolpix P7000 and other cameras. http://support.apple.com/kb/DL1339?viewlocale=en_US
When I load the update however, the installer tells me that "this update is only for Iphoto 11 and Aperture 3" which is a bit odd , since I have Aperture 3 ?!
Can anyone help please ?
Kind Regards
AndreasWelcome to the list. Make sure you read the [Help & Terms of Use|http://discussions.apple.com/help.jspa] section when you get a chance.
Do you have Aperture installed in the Applications folder as Aperture (not Aperture3 or anything like that)? -
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
Flash Text not displaying certain fonts
Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fontsFodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com -
Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first. -
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
DNG Converter 6.4 does not recognize any RAW files
Hi,
I have updated DNG Converter from 6.2 RC to 6.3 and 6.4. DNG Converter 6.2 RC from Adobe Labs recognizes all my RAW files (Canon PowerShot S50, PowerShot SX1IS, EOS 400D). The official releases of 6.3 and 6.4 do not recognize any RAW files of these cameras.
I select a directory, where the raw files are located, but DNG Converter tells me that no files where selected. With 6.2 RC, I select the directory and everything just works fine.
What's wrong with this picture?
atb,
MOS-6502Ahh, I forgot:
System is Windows Vista Ultimate 32bit, patched up to date.
atb,
MOS-6502
Maybe you are looking for
-
Like many others after I installed Maverick I found that all the calendar history has been lost and most of the forward info has also been lost. Also in order to get calendar, contacts and notes to sync with the iPhone I have had to move to iCloud. C
-
I am so upset with Apple right now. I have been clicking the email reset link for my security questions for a week now. I have recieved no answer and Tec. Support wants me to pay to talk to them. I just want to reste my questions so I can use my itun
-
Registery / binary in rollback patch
If the ERP applications, and database doesn't work properly after patch applied and upgrade done. Does the restore of backup and Oracle home (D:\oracle\product\10.2.0) create any registery/binary problems? The Systems department was warning us that W
-
Connect a tablet as input method or push asynchronously data from the WebAs
If have to connect a tablet to a WebDynpro application. Not a tablet PC or something, just an ordinary tablet. This is one of those big plates with hundreds of imaginary buttons. The user pushes with a pen some imaginary buttons on the tablet and the
-
JDBC Reciever issue with Place Holders
Hi, I am working with Idoc to JDBC scenario. Where the table field names contains $ value in it. Example: T$value1, T$value2,T$valuse3 and ... so on. The special characters would not be accepted in datatype elements in XI. I found some details workin