IPhoto '11 vs. Aperture 3 for Jumbo Library?
My iPhoto library has 58,674 photos (196 GB large). It seems to get slower and slower. If I switch to Apeture 3 will I get any speed/performance gains? If not are there any other ways to speed up my sluggish library?
iPhoto is good for 250,000 images so you're good for a wee while yet.
I find Aperture to be perfectly speedy, but then I also find iPhoto to be as well. On the other hand, have a look at the Apeerture forum, speed is quite a regular complaint over there.
Speed isses can be tricky to figure out.
Some things to try:
Trash your plist file
Trash your iPhoto Cache
Make sure you have sufficient disk space
Rebuild the Library
As always, before you do anything: make a back up.
Similar Messages
-
Can I use both iPhoto and Aperture on the same library?
I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
Thanks much!
JohnI think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
Thank you -
There was an error opening the database for the library “/Users/madis13/Pictures/Nikon Transfer3/Aperture Library.aplibrary”.
What to do when it comes to such a notice?
If I want to open the aperture program, followed by a message, and the only option is to quit, but the program is not avanegichose import library.
That might be the problem.
If you want to import an image file in to an Aperture Library, you use the command
File > Import > Files
or
File > Import > Folders as Projects.
The command
File > Import > Library
is for importing whole iPhoto Libraries or Aperture Libraries. Have you tried to import the Aperture Library into itself?
However, the program did not open the catalog yet, and I did force quit.
Do you mean, after you tried to "import as library"?
Any success with the First Aid Tools as I suggested?
Hold the key combination ⌥⌘ firmly down and double click your Aperture Library. Then select a repair option from the panel.
Léonie -
The hard drive on my MacBookPro recently crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture! Any thoughts on how I can rebuild the iphoto library? Currently I can't even get into it.
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks
Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics -
My iPhoto library has suddenly disappeared from my computer.
When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist anymore. I did not have time machine set up, so there is no back up. Is there any way i can retrieve my library?
Here is a picture of what appears when i click on iPhoto:In terms of searching i have searched for photos on my finder. However, none of the photos that appear are from my iPhoto Library.
Search with FindAnyFile. You can download it here: http://apps.tempel.org/FindAnyFile/index.php
Search for any file with "ThumbJPGSegment" in the name. If you added at least one image to your library, the library should contain a file with this name, see OldToad's post: Re: Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it? -
I have been using iPhoto for years. Today when I tried to upload pictures from camera, I received the above error message. I select "Repair", enter my password, and then a message "iPhoto was unable to repair permissions for the library" appears. I select "Quit" and it closes iPhoto. Quit is the only option. What has happened? I have tried to access the photos via other avenues such as uploading to gmail, and the photos load fine. I have about 28,000 photos.
I do not know what version of iPhoto I am using as I am unable to access the software. I have a iMac OS X (10.7.5). What should I do?Select the iPhoto application in the Applications folder and type Command+i to bring up its Info Window. There will tell the version number. If it's iPhoto 9 or later apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
JimHello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie -
i cannot change editing location from aperture to photoshop in iphoto. i followed directions to advanced tab in iphoto and have 2 choices for editing photos-iphoto and aperture. any suggestions on how to change the sites? thanks.
Not sure why you would have Aperture there as it's not an editor.
To change, just select Aperture again, and this will give you the dialogue to change the choice.
Regards
TD -
I'd be grateful for any suggestions as to how I can re-open Aperture again. It has been increasingly flaky recently and this isn't the first time it has done a rebuild but is the first time it has failed to start up. Most of my photos are referenced. Many thanks for any help you can give.
Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries. -
I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
ThanksAfter a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie -
When I try to open Aperture 3- I get this message : There was an error opening the database for the library...(name of library).
The last time I tried to open the library I got a window requesting a conflict in library data. It ask if I wanted to resolve it. So I pushed the repair button.
Thanks in advance for your help !!William,
Thanks so much for your reply.
When first hooked up I reformatted the external as Mac OS Extended Journaled within Disk Utility.
I am not sure what HFS+ means. Can you help me there ?
Tom Rodgers -
There was an error opening the database for the library “~/Desktop/TEMP_aperture/Aperture Library.aplibrary”.
I am not able to open my Aperture - I have tried the recommendation from the manual page 839, but I do not get access to the window the manual says I should get, but instead it simply open the Aperture and the errort message come up
hanslundIf the Library First Aid window didn't open you might have not been holding the keys down all the way or else sometimes when you click the icon in the Dock this will happen.
Try this, close Aperture, locate the library in the folder Desktop/TEMP_aperture and then hold down the option and command keys AND then double click the library file. That should open the first aid window,
Post back if this doesn't fix the problem or you have more questions.
regards -
There was an error opening the database for the library "~/Pictures/Apertur
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
What's up with this? Aperture showed this error a couple times before quitting when I tried to open it.I got the same error. Normally I would perform a Repair Database command by holding down Option-Command while launching Aperture, but that just gave me the same error without any options to repair the database.
Instead, I had to follow these instructions in the Aperture user manual. The key is to locate the Aperture library file on your hard drive and then hold Option-Command while double-clicking the Aperture library file.
Choose the REPAIR DATABASE option.
-- excerpt from user manual --
To repair or rebuild your Aperture library
Close Aperture, if it’s open.
Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
The Aperture Library First Aid dialog appears.
In the Aperture Library First Aid dialog, do one of the following:
To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.
Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.
To repair your Aperture library file: Select Repair Database.
This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.
To rebuild your database from scratch: Click Rebuild Database.
This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.
Depending on your selection, click Repair or Rebuild.
Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace. -
When I try to open my Aperture Library, I get this message: "There was an error opening the database for the library “/Users/alyssabouma/Pictures/Aperture Library.aplibrary”.
I have already uninstalled and reinstalled the library....Help!!lyssalou,
what is your Aperture version and what is your MacOS X version?
What happened, before this problem occurred? Did you import images, install software, move the Aperture library?
I have already uninstalled and reinstalled the library....Help!!
What do you mean by reinstalling the library? Did you reinstall Aperture?
You might start the trouble shooting with using the Aperture Library First Aid Tools - repairing the permissions, repairing the library, and rebuilding, if necessary, see:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Before rebuilding the library, make a backup of the Aperture Library, if you do not have one.
Regards
Léonie
Maybe you are looking for
-
I am trying to upload my PDF file from my iBooks but its only giving me the option to upload from my pictures/gallery. How do I get it so I can upload from my iBooks or move my PDF files to my gallery so I can upload it?
-
Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab.
-
Hi folks, argh. I'm dorking around with this function but cant get it to do what I think it does. maybe I'm using the wrong function? Here is what I'm trying to do" I have a string with a 6 character number and a comma. the number is a negative numbe
-
Populating Database records to WLS JMS queue
Hi All, Please suggest which is the performance effective approach in populating WLS JMS queue from the database tables? As I have to produce millions of records from the DB into the JMS queue and assuming using DB adapter and retreiving bulky data i
-
I'm now on MobileMe. When I move to iCloud, will I instantly lose the ability to access iWeb and my iWebsites? I have a lot of them!