IPhoto 4 - No response from Homepage Button

Dear All,
Nothing is happening at all when I press the Homepage button in iPhoto. Other functions seem to work fine. I have followed the instructions online and in trouble shooting step by step and cannot see quite what I could be doing incorrectly. I have also tried the reboot and relaunch and trying with newly imported photos.
Any suggestions would be really appreciated as i would like to share some photos from a friend's wedding.
Have had a look through trouble shooting and these support pages - I hope I am not duplicating a previous entry & I hope that this is posted in the correct forum for discussion.
All best wishes from UK
Gerard

Gerad
My first suggestion is to go to system preferences and see if your .Mac membership data is entered in the internet options. Since you updated software it might not be there.
If that doesn't work:
Most likely because of updates or installs you need to:
1. Restart your computer to repair the directory if needed.
2. Run "Repair Permissions" from Disk Utility located in your Applications>Utilties Folder.
3. Try iPhoto again. If it doesn't work then QUIT iPhoto.
4. Your iPhoto preferences file may be corrupted.
(MAKE SURE you QUIT iPhoto first)
You will find it in your Home directory:
(Home/your account) >Library>Preferences>com.apple.iPhoto.plist
Remove or trash the preference (.plist file) and restart iPhoto.

Similar Messages

  • Why did an iphoto update removed iDvd from share button?

    Lion os x 10.7
    Why did an iphoto update on 2-20-13 remove iDvd from share button in iPhoto?  Can you recoup the iDvd button on iPhoto?
    Thanks for any assistance.
    JN

    Because iDVD is not longer supported or offered by Apple.  So now you have to export any iPhoto slideshows at the large or medium size to your hard drive, place it where you will be storing QT movie files and then drag into an open iDVD project window being careful to avoid any drop zones in the menu window.
    If you place the file in the Movies folder you can acces it and iPhoto photos via the Media pane in iDVD.
    In iDVD follow this workflow to help ensure the best quality final product:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • IPod remote no response from menu button

    I have a 60G iPod Video with the Universal dock and the remote.
    All functions on the remote work with the exeption of the menu button. There is no response.
    Am I missing something or does the menu function not work??

    Welcome to Apple Discussions!
    As it says in the manuals for those products, the menu button does not serve a purpose right now for iPods. It is for use with some apple computers.
    So, the only buttons that do anything are play/pause, forward or reverse, and volume up or down.
    btabz

  • Can't get response from home button

    Hello, My home button does not respond. I have reset numerous times to no avail. Is this a hardware problem?

    It could be. My first iPhone 4 had this problem. I tried resetting, restoring etc but it turned out that it was a hardware fault.
    Does the button feel a little soft? What I mean is, has it lost the typical 'click' feeling when you press it? That was what lead me to call Apple support for a new phone...
    Apple replaced it for me no worries though.

  • I have recently updated my Ipad to Ios7 but it has now frozen and cannot do anything with it.  Still keeps time but no response from buttons.  What to do now?

    I have recently upgraded my Ipad2 but now the screen has frozen.  Still keeps track of time but no response from any buttons.  what to do know?  thanks

    Hello Kristyp280913,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Best of luck,
    Mario

  • I am no longer able to upload photos from iphoto to Facebook. The "publish" button is now "grayed out."  Any suggestions?

    I am no longer able to upload photos from iphoto to Facebook. The "publish" button is now "grayed out."  Any suggestions?

    The window doesn't automatically pop up now. When you plug the card reader in, you should see a 4th option on the lower bar of the photos app. I think it says camera. Tap on that then you can see and inport your photos.
    If you are still having issues, try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again. It won't hurt any data but can clear gliches.

  • I can't upload my photos from iPhoto to facebook.  The "publish" button is grayed out.

    I can't upload my photos from iPhoto to facebook.  The "publish" button is grayed out.  I was able to do it in the past.  Help! Thank you.

    I try to order the album of my wedding and can't upload it on the final step after having complete everything.
    Is it too big ? what can be the issue ?
    What happens when you try to upload the album? Are there any error messages?
    Which iPhoto version are you using?
    Are you ordering from the correct Print Products Store for your country?  Check the settings in iPhoto > Preferences > Advanced:

  • How to open a new window from submit button &dialog page in current window?

    We have a requirement, wherein we have a OAF search page for PO lines with search criteria, Go button to search ,result region (table layout) and a submit button(Create new expedite).
    1. Now user can select some lines from result region and click on Submit button.
    2. On click of submit button we need to pop up a window or may be a dialog page asking that " Do you want open supplier web link portal or not?".
    3. If user clicks yes(in Dialog page) then first fetch the URL from a look up maintained in Oracle EBS on the basis of supplier of the lines selected and then open that URL in a new window and side by side we need to open a dialog page in search page asking "whether user has updated the expedite info in supplier portal or not?". On basis of this we need to updated some count in custom tables.
    So in step 3 i am facing problem, that how to open an URL in a new window through a submit button and side by side want to open a dialog page in the current window also.
    Hope a quick response from you all.
    Note:- To open a custom page we can have a link or button(button of type button and not submit button) on base page with destination url property as following javascript:
    javascript:var a = window.open('OA.jsp?page=/XXX/oracle/apps/xxx/......&retainAM=Y', 'a','height=500,width=900,status=yes,toolbar=no,menubar=no,location=no'); a.focus();
    So the question is how to do the same for submit button on OAF page???

    Antriksh,
    You just need to attach a submit action in button bean and not submit button bean, based on the output of confirm type of alert in javascript.
    Here is code u need to put in destination url of the button:
    //replace <confirm message> by message you want to show.
    javascript:input=confirm('<confirm message>');if(input==true){submitForm('DefaultFormName',0,{XXX:' abc'});}" Now in the process request of the base page CO, u can get parametre 'XXX' from the pagecontext....so
    if((("abc").equals(pageContext.getParameter("XXX"))))
    {/// custom LOGIC }
    The same i have replied in your mail. I hope this resolves the issue.
    --Mukul

  • Calling a Procedure from a Button? (REVISITED)

    Hi All,
    I once asked a question Re: Calling a Procedure from a Button? & that problem was resolved when i was working on the online ApEx.
    On my application, requirements have changed a bit: I have one form based on two tables. One table contributes two fields (name & surname) to the form while the remaining fields are contributed by another table to make a total of 17 fields on the form.
    My process is in such a way that a user enters an id number & clicks Search button, if the apllicant exists then both name & surname corresponding with the id number will be retrieved from the database. If the applicant does not exist then an error message will be displayed inline with the id number field. Here's the PL/SQL anonymous block to that:
    DECLARE
    vNAME APPLICANTS.name%TYPE;
    vSURNAME APPLICANTS.surname%TYPE;
    BEGIN
    SELECT count(*)
    INTO :P2_COUNT
    FROM applicants
    WHERE id_number = :P2_ID_NUMBER;
    IF :P2_COUNT > 0 THEN
    SELECT name,surname
    INTO vNAME, vSURNAME
    FROM applicants
    WHERE id_number = :P2_ID_NUMBER;
    :P2_NAME := vNAME;
    :P2_SURNAME := vSURNAME;
    ELSE
    apex_application.g_print_success_message := '<span style="color:red">Applicant does not exist.</span>';
    END IF;
    EXCEPTION WHEN NO_DATA_FOUND THEN
    apex_application.g_print_success_message := '<span style="color:red">Exception Caught.</span>';
    END;The PL/SQL block works except for error displaying part (but that's a problem for another day).
    NB: On my application, there’s already Automated Row Fetch & Automatic Row Processing (DML) processes for one table. Furthermore, there is also a javascript for verifying the validity of an id number. As a result, I decided to include Automated Row Fetch & Automatic Row Processing (DML) processes for the other table. When I click a Search button the javascript is activated even though I did not specify a URL target for the button - because this is a simple button among region items – it does not have Optional Url Redirect section.
    I'm not sure what I'm doing wrong here - any help is appreciated.
    Regards
    Kamo

    Hi Dan,
    Sorry for causing confusion with my post - it's just that I was asking the same question (with different constraints) as I had asked before so I didn't feel like going to details was necessary because in my post I included a link to the previous thread. Interestingly, I was working on apex.oracle.com when I posted the original thread - the only problem came to be when I started to move the solution to my application on my machine.
    Anyway, thanks for the response!
    Regards
    Kamo

  • I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

    I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

    Hi there,
    Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
    If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
    Recovery Mode and Restore - Apple
    Let me know if this helps,
    Nathan

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • IMac 20-inch on OSX 10.7.4 running iphoto 11, my photos from my iphoto library have been deleted. I have time machine but the iphoto library file is missing when I access time machine, help please.

    I have an imac 20-inch Late 2006 model on OSX 10.7.4 running iphoto 11, somehow the application ccleaner has deleted my photos from my iphoto library. I have time machine but the iphoto library file is missing when I access time machine.
    To restore photos I have followed the steps below
    Quit iPhoto.
    Connect your Time Machine drive.
    In the Finder, open the folder containing your iPhoto Library. Unless you've moved your iPhoto Library, it can be found in Home/Pictures/iPhoto Library.
    Enter Time Machine.  (Time Machine can be found in the Dock or in the /Applications folder.)
    Choose your desired backup. The timeline on the right side of the screen displays a purple tick mark for each of the backups stored on your Time Machine drive.
    Select the iPhoto library you would like to restore, and click the Restore button.
    I dont get the option in step 6 as I dont have an iphoto library file to choose? Does anyone know why?

    Hi Barry
    Thanks but as mentioned all is intact, even at step 3 I can see the current library in Home/Pictures/iPhoto Library which has no photos, but when I access time machine any point before the NOW option the iphoto library in Home/Pictures/iPhoto Library is missing from the finder window. 
    As you can see here it is
    and now its gone. I have no explanantion.
    How do I go about moving this question as you suggested.

  • Missing version field in response from server when accessing resource

    HY
    I have a problem to use the version option of the webstart. All files are included into a war file (created with jar cvf xx.war *). This file is in the webapps folder of the Tomcat 5. The jar files from the dev. kit (jnlp-servlet.jar, jaxp.jar, parser.jar are in the WEB-INF/lib folder).
    Every time I get the same message:
    Category: Download Error
    Missing version field in response from server when accessing resource: (http://localhost:8080/version/ademo.jar, 1.1)
    Do I need a aditional file or must Iwrite a servlet???
    Whats wrong
    my JNLP file
    <?xml version="1.0" encoding="utf-8"?>
    <!-- JNLP File fuer HJP3 WebStart Demo-Applikation -->
    <jnlp codebase="http://localhost:8080/version/" href="wstest.jnlp">
    <information>
    <title>HJP3 WebStart Demo Application</title>
    <vendor>Guido Krueger</vendor>
    <homepage href="http://www.javabuch.de"/>
    <description>HJP3 WebStart Demo Application</description>
    <icon href="wstest.gif"/>
    <offline-allowed/>
    </information>
    <information locale="de">
    <description>HJP3 WebStart Demo-Applikation</description>
    <offline-allowed/>
    </information>
    <security>
    <!-- <all-permissions/> //-->
    </security>
    <resources>
    <j2se version="1.4+"/>
    <jar href="ademo.jar" version="1.1"/>
    </resources>
    <application-desc main-class="Listing3813"/>
    </jnlp>
    my version.xml file
    <jnlp-versions>
    <resource>
    <pattern>
    <name>ademo.jar</name>
    <version-id>1.1</version-id>
    </pattern>
    <file>application.jar</file>
    </resource>
    </jnlp-versions>
    my web.xml file
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
         <servlet>
              <servlet-name>JnlpDownloadServlet</servlet-name>
              <servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>JnlpDownloadServlet</servlet-name>
              <url-pattern>*.jnlp</url-pattern>
         </servlet-mapping>
    </web-app>

    The log file (jnlpdownloadservlet.log) would show the calls for the jar files if the servlet is called for the jar files (did you correct the url mapping ?). Here are a few lines from a log file
    JnlpDownloadServlet(4): Initializing
    JnlpDownloadServlet(3): Request: /maportal/wfe/wfeguiv.jnlp
    JnlpDownloadServlet(3): User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6) Gecko/20040206 Firefox/0.8
    JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfeguiv.jnlp isPlatformRequest=false]
    JnlpDownloadServlet(4): Basic Protocol lookup
    JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfeguiv.jnlp lastModified=Tue Mar 23 17:06:56 CET 2004]]
    JnlpDownloadServlet(3): Resource returned: /wfe/wfeguiv.jnlp
    JnlpDownloadServlet(4): lastModified: 1080058016000 Tue Mar 23 17:06:56 CET 2004
    JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.gif
    JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
    JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.gif isPlatformRequest=false]
    JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.jar
    JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
    JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.jar isPlatformRequest=false]
    JnlpDownloadServlet(4): Basic Protocol lookup
    JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfegui.jar lastModified=Tue Mar 23 17:06:30 CET 2004]]
    JnlpDownloadServlet(3): Resource returned: /wfe/wfegui.jarYou should see all the resources (including jar files) being requested, and whether a specific version was requested or not (in above sample, not).
    I put my problems down to my application server (Orion) as other people seem to have this working. The deployment in Orion keeps the original timestamps of the jars, so I explicitly set the timestamps in my build so that the unchanged jars do not have to be downloaded all the time. This is not really a good solution, so maybe someone else can give further advice.
    Brendan

  • Any way to add a link FROM HomePage TO iWeb?

    Any way to add a link FROM HomePage TO iWeb? The instruction I found in Help only discussed adding a link from iWeb to HomePage. Since most of my family already accesses my HomePage, I'd like to be able to add a link to the iWeb pages
    This is the only instruction I've been able to find in connection with this topic: "If you’ve previously published webpages using HomePage, those pages are still available at http://homepage.mac.com/YourMemberName. Websites you create in iWeb are available at http://web.mac.com/YourMemberName/iweb/SiteName. If you’ve created webpages using the .Mac HomePage feature, you can put a link to your old homepage on the first page of your new iWeb site. On your iDisk, your HomePage sites are stored in the Sites folder. Your iWeb sites are in the Web folder."
    Thanks
        I use both my Mac and my Dell

    I'll try this, but why in the world should it be so complex? I'll let you know if it works. but how do we tell Apple/Mac that this shouldn't be rocket science, but rather something that's done with the click of a button. They're both .mac software products. Why can't they talk to each other?
    B
        I use both my Mac and my Dell

  • I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    TheAshburns,
    No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
    SandyS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for