IPhoto 6.0.6 won't print after crash

I successfully printed from my iMac (10.4.9) over my AirPort network to my Canon MP530 which is shared from my MacBook (also running 10.4.9). When I went to print another photo, iPhoto crashed. I reopened it, but whenever I would try to print a photo, the File menu in iPhoto would highlight for about 15 seconds and the beachball would spin, then nothing would happen.
I deleted the com.apple.iphoto pref from the Preferences folder, and I deleted the shared printer, but I can't even get the print dialog to display.
Any ideas?
iMac Mac OS X (10.4.9) iPhoto 6.0.6

Steven:
Log into another account and try from there. If you can't print from iPhoto in the other account then a reinstall of iPhoto probably is indicated. If the reinstall doesn't help, download and run the 10.4.9 COMBO updater followed by a repair of disk permissions.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

Iphoto 8.1.2 won't open after upgrade to 10.8.2?

iphoto 8.1.2 won't open after upgrade to 10.8.2. I have tried to upgrade iphoto to 9.1 but it won't work.

To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
LN

8500A Plus Won't print after idle 20 mins

Windows 7, 64 bit, no service pack yet. Tried updating firmware, but by computer grays out the printer option. This is my THIRD printer from HP (exact same model) that has had the exact same issue. Must be a software issue, but can't find it. Printer won't print after idle for 20 mins. Goes into printer que, but doesn't complete. Issue started Jan 2, no big changes to computer at time. Has anyone had this issue that can help? I'm about ready to go buy a Brother. Thanks

The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02790693&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IPhoto 7.1.4 won't print

Installed iPhoto 7.1.4, but now I can't print. Sez there are no themes available. But they are in the root library Application Support folder—and the app lives in the root application folder. Copied themes into ~/Library/Application Support/iPhoto just to see and it didn't help. Tried all the usual fixes: repair permissions, restarted app and OS, etc.
MacFixIt say tI'd find a Theme folder in ~/Library/Application Support/iPhoto and to copy it to /Library/Application Support/iPhoto. But I didn't have onenthere to begin with just in ~/Library/Application Support/iPhoto.
Reloaded 7.1.3 off another machine (on vacation and don't have disk) but now it still won't print.
Anyone have an thoughts?

Restoring iPhoto Themes
First look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation process described below:
1 - delete the current application.
2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder. Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

HP p1006 won't print after upgrade to Mavericks

After upgrading from 10.8 to 10.9 my computer won't print anymore. It says "Pages not found!"
The printer is attached to a Mac server running 10.8 which is printing fine, but my computer (running 10.9) won't print unless I boot it from the 10.8 partition which still works.
What I've already tried: (on my computer & server)
Reset the printing system
updated drivers to HPPrinterDriver2.16.1
Repaired permissions

Hi zmogy,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to print on the 10.9.
I will be happy to help you.
The HPPrinterDriver2.16.1 is the latest HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
Plug the printer directly into the 10.9 computer and run the Apple Updates to install the Apple drivers.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Test the printing.
I can't guarantee it will print over the server.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Ipad won't print after io7 even tho it finds printer, tried everything pls help!

I'm guessing, but it seems that after updating with io7 my ipad/printer won't print! It finds the printer no problem ( it's an HP office jet 6500A plus) but nothing happens when I press print! I've tried through different apps, turning router. Ipad and printer off then on again and reset network settings on both ipad and printer but to no avail!! I can find my way around ipad basics but am no techie, so am hoping it's something simple and I'm just being blonde...or is it a flaw with the io7? Any advice much appreciated! Than you :)

Hello Stormie9,
Thank you for the details of the issue you are experiencing when printing from your iPad. You have taken some really good steps already to isolate and troubleshoot the issue.
I found an additional resource with a few more steps. You can skip any steps you have already taken, but step 3 specifically stands out for the issue you described:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
Thank you for using Apple Support Communities.
Best,
Sheila M.

L7380 Won't Print After Multiple Diagnostics

My printer won't print. I've rebooted it and my computer more than once. I've downloaded updates from HP. I've run the Diagnostic Utility five times. I am trying to print PDF files, and other files - but no luck. What can I do? Also, some files that were sitting in the queue for more than a week printed today when I connected the printer again after many days disconnected. Is it a memory issue with the printer - can it not cope with large files, or PDF or what???
Thanks in advance for your help.

Hello Stormie9,
Thank you for the details of the issue you are experiencing when printing from your iPad. You have taken some really good steps already to isolate and troubleshoot the issue.
I found an additional resource with a few more steps. You can skip any steps you have already taken, but step 3 specifically stands out for the issue you described:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
Thank you for using Apple Support Communities.
Best,
Sheila M.

MX850 won't print after long time idle

After a long time out of action my MX850 won't print at all - I have tried deep cleaning, aligning head and cleaning rollers but still not working...I have a feeling it is the print head and I am expecting to replace all the cartridges but just don't want to have to do it if it may be something else instead as they are pretty expensive...please help.

Hello LARMC, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing idle issues. I would like to help.
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Samsung 4500 Printer won't print after restoring from Time Machine

My HD drive went down, and was replaced with a new one (1TB). Restored via Time Machine. But the printer (Samsung) won't print now. I get an error that a software update is required. I tried the System Preferences route; then I went to Samsung and downloaded a driver (once), that didn't work. I found another note that someone was having a similar problem, and tried this download
http://www.samsung.com/us/support/owners/product/SCX-4500W
Installed OK, but still no printer.
It worked fine until the software changes (I was using Mountain Lion before and after the HD failure).
But now, I have no printer.
Any suggestions besides buying a new printer?

Apple support drivers:
Samsung Print Drivers
You might try resetting the printing system:
Reset Printing System

Printer won't print after a few mnutes

Printer will consistently print just after it is turned on, but will NOT print after about 3-5 minutes. Printer goes to sleep but will wake up with a touch of the screen. If I try to turn off the printer, it often will not shut down without having to pull the plug. So, when I pull the plug and restart, if I'm quick enough, I can print. We have uninstalled and reinstalled the software both from CD and download 3 times with no luck. We have tried using the rinter wireless and with a usb cable--no difference. The printer also gets lost on my iPad and iPhone after this short amount of time too. What can I do...I am miserable! I have owned nothing but HP printers since the beginning of time!!! HELP!

HI Kathyju,
Please check the firmware and if the firmware on the printer is older than the one mentioned in the link below, please upgrade the printer and check.
The below link provides you info on how to check the firmware of the printer. If you are not using the one mentioned in the link please upgrade to the new firmware available.
CLICK here to go to the firmware download page.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

IPhoto 4.0.3 won't load after moving files in HD

I moved some photo files around in my iphoto library on my HD. Then I went to open iPhoto and the photos won't load. It opens and says "loading photos" and the little wheel-thing just spins around. The pictures are still on my HD but won't load in iPhoto. What did I do, and now what do I do?

"I opened the hood and reconnected all the wires differently and now my car won't start."
Well, a lot depends on the amount of damage that you've done. Hopefully, the changes you made are slight and you can put everything back the way that it belongs. However, based on your post, I suspect that such is not the case. I suggest...
http://docs.info.apple.com/article.html?artnum=107947

InDesign CS2 file won't print after placing an image

Every once in a while, I can't get a file to print after I place an image. The file would print fine prior to adding the image. This doesn't happen with all images - and I have investigated (trying to save the images with different extensions), but haven't found the problem.

You have provided us exactly zero information that would allow us to help you with your problem.
You could provide a sample available for us to download and test. Or you could give more information if you could list some replicable information. But you've given us neither. Sorry.

Appleworks won't print after upgrading to 10.4

I had bought Appleworks and it was working fine and then a few months later upgraded to OS 10.4.2 Now appleworks (the installed version) won't print (I deleted the other). They are the exact same version. My printer works fine in other applications. I made sure the printer was selected in appleworks printer set up also. I also reset permissions to make sure something wasn't messed up.
Any suggestions would be appreciated.
Lori

So nobody has had this problem???

Epson Stylus Color 740 won't print after Tiger "upgrade"

Just loaded 10.4 onto my iMac G5. Now it won't print.
Any ideas what to do?
Thanks, guys!
Lindsay

Try Reset Printing System, a menu choice in Printer Setup Utility.
You haven't tried installing anything - don't!

HT6114 my printer won't print after last update it is a mac mini update osx10.9.2

help my lexmark series 5600 wont print after the last update to my mac mini
can anybody help

Try here > OS X: Printer and scanner software available for download

IPhoto 6.0.6 won't print after crash

Similar Messages

Maybe you are looking for