IPhoto 6.0x conflict with Blackmagic Decklink 5.4.2

If you find that iPhoto is crashing when editing photos and you are running a Blackmagic Decklink you must turn OFF the Video Desktop option in the Blackmagic Control panel.

Solution is either uninstall decklink drivers or turn off video desktop

Similar Messages

Highpoint driver conflict with Blackmagic Decklink ?

a reader report over on the xlr8yourmac website notes a conflict between the HighPoint Technologies driver for the RocketRAID 1820A and the Blackmagic Design DeckLink 5.1.2 drivers.
http://www.xlr8yourmac.com/index.html#S20146

Thanks for this heads-up post, Andy.
I am ordering a Quad-core today, and I have an external SATA array. I don't have a BMD card, but I did anticipate the Highpoints Mac driver would need to be tweaked. They had to tweak the Mac driver for their PCI-X card as well.
Hopefully, I can wait for Sonnet to release a PCIe SATA card with at least four external channel ports. I'll need to delay or turn down any projects requiring uncompressed video until this is squared away.

Capturing device offline with BlackMagic DeckLink Quad

Hi guys,
I have a problem capturing with a BlackMagic DeckLink Quad and Premiere Pro CS6. Capturing with the Blackmagic included Media Express software works fine. However, Premiere Pro tells me that my capturing device is offline.
What I did to run the capture:
Open Premiere Pro CS6
New project --> set capture to Blackmagic capture --> press ok
New sequence dialog --> select format exactly like specified in system control panel of BlackMagic (1080 25p).
Open capture dialog with F5 key.
Tells me that the capturing device is offline.
Controlling capturing properties for Blackmagic Capture and ensuring that they match the system control panel specs and the specs used in the other software(1080 25p, Video Format: Motion JPEG)
Final State --> Premiere Pro still tells me that the capturing device is offline and I have a black window.
I read somewhere that the installation order of driver and Premiere Pro is important, therefore I tried already both constalations (Driver, Premiere Pro - Premiere Pro, Driver ) without any success. A driver update of the Declink Quad did not have any effect.
Driver version:
Blackmagic DeckLink SDI - Date: 22.01.2015 Version: 13.4.10.868
Any help would be highly appreciated.
Best

Yes, Component is indeed not a better quality... Interesting because I did plug into a flatscreen, and I have nothing as well... So maybe it is the component out of the z1u that is not even working! Will try with another cable in case, but that may be the answer... Thank you for pointing that out! didn't even think about it...
I'm really trying to capture old HDV tapes, and always get those phantom breaks with Firewire (using another deck since it's broken on the z1u), now I'm wondering if you get less breaks doing 1080i or ProRes?? Although files are way bigger.

Can't lower framerate with Blackmagic Decklink

We have FME3 and a Blackmagic Decklink SDI 10bit, drivers v6.6. We would like to stream at 15fps, but in FME, I can't set the framerate to anything lower than 25. When choosing 15, it just jumps to 25.
Also tried changing it in the card's system driver - which I can - but then when I load up FME, its clearly still running at 29.97, and I still can't change to 15.
Any thoughts?

FMLE supports only those FPS that are supported by device.
In this case device is giving fixed FPS which is 29.97 irrespective of value selected in FMLE. You are sometimes getting 25 FPS because of unavailabity of enough CPU to encode 29 frames per second.
The only workaround in order to get 15 FPS output is to load your CPU or Increase Video frame size so that some of the frames get dropped by FMLE because of unavailablity of CPU and effective output FPS drops to 15.

Will FME work with BlackMagic Decklink card?

Has anyone used this combination of components together? I want to capture SDI and might have access to a Decklink card, and I only use FME 3.2 so want to be sure they'll work together before I spend the money. Thanks-

I'm using BlackMagic DeckLink Duo and it works fine.

Automation Open (CoCreateInstance) with BlackMagic DeckLink frame grabber

I am trying to interface BlackMagic frame grabber hardware that has a COM driver. The C++ demos for the driver work flawlessly, but I fail to access the COM components from LabVIEW. The driver is initiated in C++ with
CoCreateInstance(CLSID_CDeckLinkIterator,NULL,CLSCTX_ALL,IID_IDeckLinkIterator,(void**)&pIterator);
As far as I understand the corresponding LabVIEW command should be to use Automation Open with either CDeckLinkIterator or IDeckLinkIterator as automation refnum. However for both refnums LabVIEW returns an error when executing Automation Open: Error 3005 occurred at Automation Open: Object specified is not creatable.
When I look at the demo code provided with the COM driver, there are really two COM commands that are executed before the CoCreateInstance
AfxWinInit(::GetModuleHandle(NULL), NULL, ::GetCommandLine(), 0)
CoInitialize(NULL)
Does anyone have a clue why the Automation Open might be failing in LabVIEW but CoCreateInstance is not failing in C++. Is there a possible workaround? I have tested this with both 64- and 32-bit LabVIEW 8.6.1.
Tomi
Tomi Maila

Hi,
I made some progress...
I found a response to my first question in the forum, with a link to :
http://digital.ni.com/public.nsf/allkb/6EC98441BFAF93A486256DCD000179A2?OpenDocument
so the solution of this problem is in snipet decklink1
My remaining problem is about the configuration of the callback. It doesn't seem to work like in LV examples, or forum examples, as I cannot reference my callback VI as the callback function, and I get no event in the 'register for event' node.
Phil
Message Edité par Ficare le 03-19-2010 12:11 PM
Attachments:
decklink 1.png ‏29 KB

No input with Blackmagic Decklink SDI 9.7.7 and Adobe Premiere

Hi there
My BM Decklink is properly installed: I can grab Video with the BM Software.
In Adobe Premiere there is no signal. The TC is ok and running.
All Settings seems to be ok.
I'm running a Windows7/64 Bit
Thank for your help.

Yes, its an HD sequence, I want to view it in component but I'm using a SDI-Monitor also (which strangely gets an audio signal, but still no video)
I can't find anything like that in the 'Select output processing'-box, even after updating to 9.7.8 (released on Friday)...
It doesn't make any sense to me. Why would it work with AE and BM Media Express but not with Premiere CC?
My BM Decklink is not the newest model, but I don't think thats the problem.
It still seems to be supported by the software and it works with AE.
I'm going to change my graphic card from GTX 780 to NVIDIA quadro, lets see whether that will get me the result I'm hoping for, but tbh I'm giving up...

Importing Files Captured With Blackmagic DeckLink

Hello everyone,
I recently started capturing in 720p with 2 channels of embedded audio using Blackmagic Media Express on a PC (Windows 7). However, when I try to import into Premiere (CS6 on Mt. Lion iMac) the audio does not show up on the imported file. I can play the file back on my iMac using BM Media Express and the audio track is there. I created the sequence using the "drag and drop" method onto the "New Item" button, so the sequence should be setup for that specific file. But even in the source monitor, there is no audio shown.
What did I do wrong? What more details do you need?

Also discovering another problem involving audio importing
I'm combining audio files with video recorded on my DSLR and rexporting them for editing. So far I have done 5 with no issues. When I export, I am checking "Match Sequence Settings" and there have been no issues. All audio/video imports just fine. Except the one I'm working on now. If I play back the file using quicktime or VLC, the audio plays just fine. But it will not import into Premiere.
Perhaps a reinstall?

FMLE won't let me set the sample rate with Blackmagic Decklink Studio 2 (Windows)

Hi,
I am trying to set the audio device on FMLE to the Decklink Studio 2's audio inputs. However,
the sample rate sticks to 44.1k and I can't change it to the 48kHz sample rate that
the Decklink defaults to (standard for broadcast is 48k).
Try as I may, it isn't changeable. I seem to remember a similar problem where the
sample rate defaults to the system audio card (on the motherboard) which is at
44.1.
Any ideas on a work-around? The audio from the Decklink is *much* better than
the built in card.....
thanks
jeff

One thing you might try doing is trashing the preference file in your user directory:
~/Library/Preferences/com.apple.compressor.Compressor.plist
Like repairing permissions, this is a bit of a "catch-all" fix, not something specific to this particular problem.
Also, have you tried different file types like: TIFF or JPEG, there could be an issue with output from Fireworks. You could use QT Pro to transcode the file. Sometimes that can work to fix funky problems.
Does the Text Overlay filter work?
BG

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

Understanding the way to connect a MDD to BlackMagic Decklink Extreme card

Hi,
I require some help in the following:
I recently bought myself a Blackmagic DeckLink Extreme™ with 10bit SDI/analog video and audio capture card.
Looking at the specs, http://www.blackmagic-design.com/products/sd/specs/, can someone give me directions as to the best setup I can do from the following sources and what other equipment I may require to achieve it.
- mono stereo audio VHS -> has 1 video/audio in and 1 video/audio out (composite connections)
- stereo audio video camera -> has 1 8 pin S-Video out port to composite connections (Hi8 tape type)
- DVD player -> has composite 2 x 2ch stereo audio out, 1 x 5.1ch stereo audio out, 2 x video out, 1x component video out, 2 x S-video out, 2 x digital audio out; 1 x RCA/OPT
- 2 x 23" monitors connected by ADC and DVI connections to a Apple MDD G4, may relay to 60" Plasma for video monitoring from video card prior to creating DVD final piece for playback.
Basically, I wanted to have multiple source inputs and outputs, but I'm having difficulty in understanding the setup. Please refer to http://www.blackmagic-design.com/downloads/connections/decklinkdiagram.pdf page 5/6.
I purchased the following from JayCar
- 6 x PA3655 ADPT PLG RCA:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=PA3655&CATID=& keywords=PA3655&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
- 1 x AC1668 SWITCH AV 3WAY:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=AC1668&CATID=& keywords=AC1668&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
What other devices do I need to set up the equipment in the following way:
<pre>
Computer ------- Video In + Stereo In -----------> 3WAY SWITCH BOARD
| | ^ ^ ^
| | | | |
Bigpond |---- OUT ---> TV --------|-----|-----|
(Satellite Internet) | | | |
FOXTEL DVD VCR V/CAM
(Satellite TV)
</pre>
Currently I have not succeeded.
I have just done a simple test like so:
<pre>
Computer ------- Video In + Stereo In ---------> DVD (*)
|
Bigpond
</pre>
(*) Tested using the following:
<pre>
From Decklink -- Y IN (from deck) --> DVD Y port
-- B-Y IN (from deck) --> DVD Pb port
-- R-Y IN (from deck) --> DVD Pr port
-- SDI IN (from deck) ---> DVD Digital audio out
ASWELL AS
From Decklink -- Y OUT (from deck) --> DVD Y port
-- B-Y OUT (from deck) --> DVD Pb port
-- R-Y OUT (from deck) --> DVD Pr port
-- SDI OUT (from deck) ---> DVD Digital audio out
</pre>
Not one has seemed to work. What am I missing here?
Thanks
Tiberius
PPC MDD Dual Boot/Dual 1.25GHz Mac OS 9.2.x 2 x 23" Apple HD Display, 2GB RAM, 2x150GB + 1x1TB HD

pomme4moi wrote:
I want to buy a hard disk (not a NAS device) and plug it into my Airport Extreme in order to share data between two Mac computers, and to stream iTunes content to my Apple TV.
One option is to purchase a hard drive (say, a 2TB Hitachi G-Technology drive) and connect it to the USB port on the back of the Apple Extreme. The other option is to purchase a drive with an ethernet connection (say, a 2TB Lacie drive) and connect it to an ethernet port on the Apple Extreme.
In the second case what you'd have actually is a NAS. Apple's AirPort routers aren't known for fast file sharing. The NAS option might be faster.
Is either option better for streaming movies from the hard drive to my Apple TV?
I could be wrong, but an AppleTV may not be able to access content directly from a network drive. It may require that a Mac serve as an intermediary.

Can't playback on Blackmagic Decklink HD extreme 2

Hi all,
I am looking to crossgrade from FCP7 to Premiere CS6 so I have the Master Collection Demo installed on my work station along with FCP. It's on a 2008 Mac Pro with 2 Quad core 3.2G Intel Xeons, 16GB ram, ATi 2600 HD 250mb graphics and a Blackmagic Decklink HD Extreme 2. In the FCP set up this card fed a full HD JVC broadcast monitor via HD-SDI and I had no trouble with it at all and it played any type of sequence. My problem is that I can't for the life of me get a picture on the screen in Premiere. No combination of BM sequence settings or codecs, either BM or otherwise, seem to get it going. Output options seem extremely limited in the application set up with only one box to tick under the playback menu. This seems to have no effect whatsoever. The aplication can obviously see the card because the option to check it as a playback is there and the audio routes through without error. I have installed the latest Premiere updates and am running Desktop video 9.6. AE plays on the monitor fine but nothing in Premiere unless I switch the BM card to extended desktop and use the broadcast monitor as a second LCD and tick that option under the playback menu but then my GFX card seems to struggle and drops frames all over the place. I admit the ATI card is a bit of a slouch but options were limited for Mac unless you want the high end cards, which I am considering, could the fact the card is under powered have anything to do with video not getting to the BM card. I don't know much about the MPBE apart from the fact my card doesn't qualify.
Any ideas on how to proceed would be greatly appreciated.
Apart from no client monitor I'm loving Premiere, I'm finding th realtime stuff quite refreshing after FCP, which was a bit of a joke really in that area...but if I can't monitor, I can't make the switch.
Thanks in advance.

Hello,
You don't need to use the blackmagic presets to play back through your card. What are your settings under preferences>general?playback? You might want to try uninstallig the blackmagic presets and installing the latest Deskstop from BM. The uninstall option will be available when you download BM Desktop from their support site. Having the latest version isn't what is important but uninstalling is.
Cheers,
Gerry

Blackmagic Decklink card not showing up in Playback settings

Just upgraded to Premiere Pro CC - my Blackmagic Decklink card is not showing up in the Playback settings box.

Hi Peter - thanks for responding - yes I did install the latest drivers - but finally found a thread that solved the issue. Turns out Blackmagic installs the drivers in its own Adobe folder - but Adobe only wants to see them in its own special folder (Application Support>Common>Adobe). Once I moved everything from the one folder to the other, then Premiere could see the card just fine. They should be definitely look at a better way of dealing with this - so it doesn't become an emergency science project for people like me.
Anyway, case closed - for now. Thanks.

Premiere Pro CC no audio with BlackMagic 9.7.5

Hi there,
I have a DeckLink Extreme HD 2, I've just installed the new Premiere CC via my CC account and the DV 9.7.5. All went right but now I have no audio inside the application. In OSX, as in other apps like QT or FCPX I can hear the audio but I notice lot of digital clips randomly.
Neither in Premiere CS6 audio is now working!!!! What the hell! I can't work!
I'm in touch with BlackMagic support but, after wasting a lot of time, nothing has ben resolved.
I attach the screenshots of my configuration (don't mind the buffersize I tryed all the sizes).
Any help is really appreciated.
Thanks in advance.
Piero
MacPro 5,1, OSX 10.7.5, 24 Gb, SSD RAID, 2xQuadro 4000

Hi Piero,
Here's a few ideas you can try.
1. Place your Blackmagic card in slot 2
2. Set your OS system sound to Built-in or Line out audio
3. Set your buffer size to 1024
4. If those settings fail to help you can place the 9.7.3 plugins into the CC folder. Here's how:
Mac:
Copy from:
/Library/Application Support/Adobe/Common/Plug-ins/CS6/MediaCore
Paste to:
/Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore
Hope that is helpful. Let us know how it goes.
Peter Garaway
Adobe
Premiere Pro

Monitoring with Blackmagic hardware

I use a Blackmagic Decklink SDI in Adobe Premiere, but it doesn't show up in Encore, even though the video output preferences window looks very similiar. How do you preview on a broadcast monitor?

According to this Adobe blog, Blackmagic hardware is supposed to work with Mercury Transmit in most Adobe apps, including Encore.
http://blogs.adobe.com/davtechtable/2012/04/intro-to-premiere-pro-prelude-and-encore-cs6-m ercury-transmit-io.html
Not working for me. I've tried reinstalling Desktop Video.

IPhoto 6.0x conflict with Blackmagic Decklink 5.4.2

Similar Messages

Maybe you are looking for