Iphoto 6 is crashing my internet access

Lately, everytime I try to send a photo book for purchase, the upload crashes and my internet service goes down. This is a recent problem, in that I didn't have any issues doing the book purchase in the past. I don't seem to have a crash problem otherwise with any other program. Any thoughts would be greatly appreciated

thesisko
Some troubleshooting basics to begin with:
Ensure that you have the latest version of the OS (10.4.9) and Quicktime (7.1.6) and iPhoto (6.0.6).
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
iPhoto does not list the albums alphabetically, and the only way to position them is by drag and drop. Just takes practise.
Regards
TD

Similar Messages

Adobe Reader 11.0.00 crashes whole company with Internet access

Hi all
Since today we have a very bad issue with adobe Reader 11.0.00. After 20 seconds it crashes automaticly. We didn't change anything on our system.
THIS HAPPEN ONLY WHEN ADOBE READER 11.0.00 HAS INTERNET ACCESS.
Please someone help us it affects over 1700 Clients...

Hi Everyone,
This was a temporary glitch with our servers that has now been resolved. Please re-launch Acrobat/ Reader and let us know if you still face this issue.
Thanks for your patience.
Regards,
Deepak

Internet access problems and viewing video on internet

I have very limited interet access most of the time. I get a message: "You are not currently in an area that can handle data communication. ..." I have no problem with email and other features of the phone during this time. The signal at the top of my phone says "GSM". When I am able access the internet, it give me a different signal (can't remember what that is, however). Even then, I cannot view most video clips, such as YouTube clips. They will not load all the way. It states, "Error has occurred in attempting to play media." Help!

I have unlimited internet access, so that's not the problem. Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage. I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home. I've also been able to view a video clip, not successfully all the way through, however. During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot. This has also happened when the phone has not even been being used. Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did. Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips?

ITunes 10.2.1 crashing my internet every 15 min. Should I uninstall iTunes?

I updated my iTunes to 10.2.1(1) 2 days ago. Since then I have had to run the OS X install disk and have disk utility fix corrupted files, and my internet has crashed ever 15 minutes. When it does more times than not I have to restart my whole comp not just AirPort. I used an ether cable and tethered to my access point hoping to solve the problem. It didn't even help a little. I quit using Itunes 24 hours ago and haven't opened the app at all. It is still managing to crash my internet.
Everyone else that updated seems to only have issues with iTunes crashing and the store. So I do't know what to do.
Uninstall iTunes then reinstall an older version? Sit around and wait on a fix from Apple? Does anyone have any advise for me?

And yes, I've deleted the iTunes preferences and also re-installed iTunes with the download from the Apple website, still crashes.

Why no internet access after Safari reinstallation (router does)?

Since yesterday I have a massive problem I hope someone can help me out.
To start with I couldn´t email attachments since a few months. Yesterday I thought a re-installation of Safari (browser recommended by the provider) might cure that as I thought recent upgrades (recommended by apple to install) caused that problem which was not there last year.
So I downloaded Safari from apple.com. From that on I can´t get any internet access anymore (only a few minutes after the first start, then never again), even after spending 40 minutes on my providers extremely expensive hotline no solution (other than that the friendly lady told me to contact this forum). My router has internet access, and the cable between router and my Mac is definetely fine, but when I open the internet-access window, the connection immiadetely crashes always.
I checked network utilities and found no failure, I tried different ways of access via the network settings, nothing works. I assume it has something to do with the re-installation of Safari, but why on earth should the standard Safari 1.2-version from Apples own website create such a mess?
Shall I install firefox? Shall I dump the Safari-version installed yesterday and install a copy of the updated version from my office computer instead? What else could cause the problem? Are my network settings wrong? Should I log in via "manual" or DHCP (the provoders hotline told me I should re-type PPP settings. Though that is clearly to see a no-option with Ethernet she kept telling me so. Isn´t PPP only for modem-connection?), or via PPoE? Or shall I re-install the router?
I would be more than glad if someone could help me.
I-Mac 20" Mac OS X (10.3.2)
I-Mac 20" Mac OS X (10.3.2)

We can keep it in English as its an english speaking forum and therefore non-germans who might have the same problem could participate. If for you German is better I´m fine with it. Most settings on my Mac are in German so if it becomes too specific, german is anyway necessary.
Thanks,
Nobbi

Turning On Airplay Mirroring on iPad 2 crashes router Internet connection

Using the new Apple TV 2 firmware 4.4 in combination with iPad 2 (iOS 5).
Apple TV 2 connected to Linksys E4200 router via Ethernet cable. I can stream movies over the network (USB-HDD
connected to router with router built in UPnP AV server). Samsung Series 6000 Smart TV.
- AirPlay working great from iPad 2 to Apple TV and everything else iOS 5 is also no issue.
BUT
When I turn On Airplay mirroring on the iPad 2 I can see the blue bar on top of the screen
indicating mirroring is On but only after a few seconds the blue bar disappears and the Internet
connection is gone for all users on my network.
I have to go in the router settings and reboot router in order to establish Internet access again..
I've gone through this 5 or 6 times now and I can single out the mirroring for the router crash.
Mirroring has not worked once.
Weird! Anybody?

It's was a router QOS setting.
Steps:
1. Login to your router
2. Click on Application and Gaming
3. Click on QOS
4. Disable WMM Support
5. Done
Mirroring working great now on my AppleTV!

Guest Internet access in the Enterprise

We have set up guest internet access in our enterprise using GRE tunneling with a PIX. I'm trying to determine the best way to do authentication for users on this guest network.
I think I can do RADIUS (using ACS) with the PIX as an NAS. Question is can I use a different type of server (such as MS IAS)? Can I use either one to utilize an existing MS Active Directory database?
If I use radius on the pix for authentication, a login prompt pops up when a user tries to use the web. Is there a way to redirect users to a web page first and have the login embedded on the page? This is done in hotels now and I don't know if there's a Cisco solution for this.

The following documents lists all the supported Databases,
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/d.htm

JetPack 4G LTE connects but "no internet access" message

Would appreciate any help.
My JetPack 4G LTE mi-fi connects to the internet (3G or 4G) and shows that my devices are connected to it. However, I cannot get on the internet.
1) I have three different devices - two laptops and a smartphone. All three have the same problem.
2) I have a Sprint Mi-Fi that I use for a different business. All three devices can and do connect to that device and work properly on the internet during the same sessions in which they cannot connect on the Verizon JetPack. So it is not the devices I am trying to connect with.
3) The exact same thing has happened several times over the course of about 4 days and in two cities and two states - all three devices unable to connect via JetPack but connect fine through Sprint Mi-Fi. So it is not location or local network issue.
4) LED display on JetPack, in all instances, show a strong 3G or 4G (depending on where I am) signal and also that all three devices are connected.
5) Message on laptop wireless area shows connection but says "no internet access".
6) Under the wireless status or details, it says (on the list of info): "IPv4 no internet access" and "IPv6 no internet access".
7) I have done a battery pull with no effect.
8) I have done a factory reset (power up, remove cover, press reset button until long green light and short green light) with no effect.
9) After both battery pull and factory reset, I still show connected to 3G, all three devices connected, no internet access, and all three devices then work on the Sprint mi-fi.
10) Symptoms started about 4 days ago and have not changed since - it is not a come-and-go problem. It is not working at any time.
I am hoping to gosh to avoid a long ordeal with tech-support at Verizon. This is a company-issued device, so I could ask my company to take it up with Verizon, but I work remotely and access to the IT department is not that simple either. thought I would see if I am missing something simple. I hope I've given enough info for someone brighter than myself here can spot something I could do.
Thanks in advance for any help.

Thank you for your response. I am having trouble logging back into this site to respond (I never created a User ID and don't know my cell phone number as it is a mi-fi and not a cell). I reregisterd for the forums only under a slight ID variation and will continue to do so for this dialog. Thanks very much.
The back of the Jetpack says SSID: "MiFI4620L Jetpack 89B4". I am currently using the device (since the problems began last week) in zip codes 49504 and 49503 - same symptom both places.
Thanks again.

Internet Access to Portal located in DMZ

I've seen questions on the forum regarding gaing Internet access to the Oracle Portal located in the DMZ. This answer does not resolve the issue of having multple DADs to access your portal like abc.com and xyz.com. For that see note:162044.1 on metalink. http://metalink.oracle.com.
If you registered a domain name e.g. abc.com and have the portal up and running in the DMZ. Your local network should be accessing the portal just fine. Your computer name for example is portal. The URL translates into http://portal.abc.com. You opened the ports in the DMZ to allow access and wonder why you get partial portal pages, no login, etc. It's becase users can't resolve the DNS entry for portal.abc.com. Call your ISP and get an "A Record" entry. After a few hours and propogation of the A Record, users on the Internet can successfuly access your site. This A Record should be free.
Good luck
Kellan

Hi,
You've to open the ITS for internet for accessing things from Portal too. As I've told you in previous post, the request goes directly to ITS server (http://itsserver.com/scripts..) and not as (http://myportal.com/scripts..). The idea of having it via Portal will be to mask the URL of ITS , which will not be visible (except for time you click on iview which will display in status bar). In any case, you can directly acces ITS as what you've told, however you give the proxy.
Regards,
Siva
P.S: Award points if you find this useful.

Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem?

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Wireless internet access issues

Hi All,
Now that I have the back up battery issue resolved and my mac works again, need some help with my airport connectivity.
I have a circa 2000 Imac DV, using OS 9.1. I just purchased and installed an airport card. I used to use dial up internet access and am now trying to access the internet via my Verizon wireless DSL. The little telephone icon appears on the tool bar. Is this correct?
The computer won't recognize my secure WEP DSL password and seems to try to access the internet via the PPP connection.
I have a secure WEP internet connection. Just a few days ago a friend of mine was able to access the internet from my DSL via her new powerbook. Her computer accepted my WEP password.
Do I need to make any system configuration changes to turn off the PPP connectivity to use my airport card?
Thanks, Ken

kweiss66, Welcome to the discussion area!
You are in completely the wrong discussion area. You need to post your question in the iMac CRT (G3) discussion area.

Wireless Internet Access (Cisco IP NGN or Cisco Wireless Mesh Networkin)??

Dear Cisco Wireless Team
Please educate us on where to start, or the CISCO product we might need to purchase
We are trying to branch out a new Internet wireless access and wireless phone service business in our company, and presently looking for the right Cisco product solution to purchase to enable us offer this service in LAGOS, NIGERIA.
The service will be rendered in Africa, the country NIGERIA, and the city LAGOS.
We would like to mount or install the product in Lagos, Nigeria.
As we are new to this kind of service. We would appreciate if the Cisco wireless team can work with us in pointing or directing on the right product to purchase and what are required. We understand the Cisco Wireless Mesh Networking Solution, Cisco IP Generation Network, Cisco 12416 or 7600 Series Router might be the right products to purchase, but we are not sure on what needed or what are required to meet our service need.
Possibly we would like to offer Wireless Internet Access to unlimited subscribers, and also Wireless or Mobile Phone service to unlimited subscribers in Nigeria.
Anticipating your reply

I suppose Cisco Wireless Mesh Networking would be a good choice.The Cisco mesh architecture makes it easy to scale coverage as capacity needs dictate, including increasing access point density; adding wired connections, controllers, and radios; and using dual high-powered, high-sensitive radios and a selection of high-gain antennas.Refer the document for IP NGN in the following URL http://www.cisco.com/en/US/netsol/ns537/networking_solutions_solution_category.html

Wireless Internet access via requires unplugging cable modem -

I have a brand new MacBook Pro with Snow Leopard (10.6.1) and Airport Express (7.4.2). I have high speed Internet via Comcast/cable modem. I spent 30 minutes with the Apple Tech Support folks and was finally able to get wireless internet access. However, after I shutdown and reboot, the only way I can wireless internet is to unplug the internet cable from both the wall plug and cable modem and unplug the modem, both for about two minutes. This isnt what I had in mind when I crossed over from the dark side (PC laptop world) and am having buyer's remorse. Does anyone know how I can fix this problem (i dont want to unplug cables before each session on the internet)?

Mr. Timmons,
Thank you so much for the response. I thought the complete reboot would work, but apparently not. I followed the directions precisely, even waiting a few minutes longer than suggested for each of the steps. My air express is still blinking yellow. I think the issue has something to do with the DHCP and the IP address which are diifferent. The IP address is one series of number (starts with 169), and the LAN IP address is another number (starts with 10). Status on airport express show yellow for internet connection, and yellow for no DSN servers. When I go to the internet tab of airport utility, it shows the iPv4 address starts wutg the 169 number. When I click on the network tab, the DHCP range starts with the 10 number. When I open the Network Options window, the iPv4 DHCP range starts with the 10 number. I am at a loss as to how to get them to match up (with either the 169 number or the 10 number). V/R sjbgtmo

New to Networking - Verizon Wireless Broadband Internet Access

Hello,
Just setting up my home network with a router and printer server. However, when I went to set it up, it is looking for a cable to connect from the laptop to the router. I use a Verizon Broadband wireless card that I insert into the pcmia slot on the laptopr, therefore, no wires involved.
Will this work with the router or do I need the cable connection for it to work.
Also, in the setup it asks not only for the IP address (which I think I found) but also a subnet, gateway, dns, etc. Any suggestions on where I can find this info.
Or is this all just explained somewhere in an easy guide when using a wireless internet access card.
Thanks in advance for any help.

Thanks for the info. Since I live in a rural location, the only options I have are either slow dial up with MSN or the broadband access card in my laptop with Verizon so I guess I will be limited to the internet only on my laptop if I want faster access.
One thing, though, when I open the program for the verizon card (VZaccessmanager), it shows a symbol for linksys as an available network even though I didn't provide the ISP, etc. answers.
The router that I am using is the WRT54GS and and a WPS54G print server.
And, yes, the ISP question was being asked during the final stages of router installation, along with the gateway question, etc. Now that this isn't going to work with the access card, do I need to answer these questions?
Any help will be appreciated. Thanks.

Iphoto 6 is crashing my internet access

Similar Messages

Maybe you are looking for