IPhoto 6 photocaste results in error and aborted action

Each time I try to Photocaste an album or slideshow from iPhoto, the event ends in an error message saying that the action was aborted for some unnamed error.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Similar Messages

Installing 4.0.2 results in error and phone in recovery/restore mode?

Plugged my phone in to update to 4.0.2 and iTunes downloads the update. It attempts to install it, errors out, and then when I do it again, it says the iphone has to be restored. What the heck? Also, prior to this update, whenever I have connected the phone to my computer, it syncs properly, but gives me an error message despite that. I usually just click through it and ignore it, has been working fine.
Should I get my device swapped out for a new piece? (Also the home button sticks sometimes)

Happened to me a week ago. Apple gave me a new phone.
Phil

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

Display an error and cancel the job in F110

Hi all.
I use a BTE's to check some data in F110 transaction. I want to display some error and abort the proposal creation JOB.
I can to abort the Proposal creation JOB with RAISE_EXCEPTION command, but I cannot display the error.
how I can to display an error when I find an issue in Porposal creation JOB ( using BTE's) ?????
thanks
Ismael

You cannot implement exit randomly for F110 cause F110 is stand alone for support Automatic payment transaction for all country.for most the country it have a seperate exit so be carefull before implement exit and make sure for country.
if you want to check before scheduling a proposal run than you may se at BADi:
FI_F110_SCHEDULE_JOB
Method:CHECK_PARAMETER
use parameter for country key:I_LAND1 in above method
and use parameter control records for schduling:I_F110V in above method

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

What version of iPhoto?
What colour profile is the shot?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says Error Code -36. I need to free up space asap, what should i do?

I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says "Error Code -36 The finder cannot complete the operation because some data in 'iPhoto Library' could not be read or written". I need to free up space asap, what should i do??

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

I began to down loading most recent iPhoto update but get an error message and it won't finish the update. So I am not able to open my photo library. What do I do?

I updated my iMac to maverick When I did the up date for iPhoto it give me a error an will not complete the update, now I can't open iPhoto and cannot access my library

Maybe sharing information would help get better answers
What version of iPhoto do you have? What is the exact error message? What happens when you open iPhoto?
LN

In iphoto i get this error for a video that I wanted to play - The operation couldn't be completed. (OSStatus error -54.) what is that error and how to fix it?

The operation couldn’t be completed. (OSStatus error -54.)
My Apple course instructor felt it would be smart to create all in iphoto dragging in all videos and photos to one spot.
I now get these errors and they wont play.
What is the error telling me and how do I fix it and get the video to play please??
Is it true iphoto will be replaced in this New Year and if so does anyo

No it didn't at all.
I went to the finder and saw several of the same .
When I called Apple they told me not to delete anything using the Finder… odd I thought, as that was the only way I could see the multiple videos and photos.
Do you think there is any harm in deleting from there directly if I have a good playable copy?
Thank you both for responses.
The clips/videos some are from iPhone 4.
I opened it manually and found 4 copies of most of the same videos, same names, some with slight variations. Don't know why.
Some are titled from iphoto /Masters don't know why that happened
Now I also have some clips with white dotted line on grey where the clip used to be? why would that occur??
In my finder there are now 97000 images. Yet I only have 22,000 in iphoto. Where are the rest located and why so many duplicates?
Have I checked a box somewhere and need to address that?
Thank you for any insight and guidance.

Every time I try to export or publish my project it result in a error and closing de program, any idea ???

Every time I try to export or publish my project it result in a error and closing de program, any idea ???

Hi,
That link takes you to the Facebook for iPhone app.
You have posted in the Mac App Store for Mac OS X. (I know it's somewhat confusing especially with the new forum format).
Try deleting the Facebook app from the iPhone by pressing down on the app on the iPhone until it jiggles then tap the circle with an x in it. Then tap the Home button to stop all the apps from jiggling.
Now tap the App Store icon and and re download the Facebook app again.
If that doesn't make a difference, post over in the iPhone Discussions forum at this link.
https://discussions.apple.com/community/iphone/using_iphone
Carolyn

Deleting I Tunes results in CD and DVD readers error (corrupted driver)

recently I deleted I Tunes from my computer; as a result, my CD and DVD readers were no more available(no more recognized by the operating system and have disappeared from the computer window); the error message was "corrupted driver, error code 39). I had to reinstall I Tunes to fix this bug.
Does someone know anything about this bug and how to fix it without being obliged to reinstall I Tunes ?
*I find absolutely abnormal that an official garanteed virus free sofware can corrupt my computer operating system.*

The issue may relate to the operating system pointing to the associated drivers, rather than reinstalling, try to locate the appropriate drivers and reinstall.
Todd Nadrich
Software Engineer

App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results

Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspx

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Hello, I upgraded to Yosemite (10.10.2) a month ago and everything was fine. Suddenly I can't open iPhoto. There is no error message and nothing happens. Please can you advise?

Hello, I upgraded to Yosemite (10.10.2) a month ago and everything was fine. Suddenly I can't open iPhoto. There is no error message and nothing happens when I click it. Thanks for any advice.

Hi Larry,
When I open the Bonusprint software there is a window on the side with 'LIBRARIES' at the top and I can access my photos and albums from here. I can still see all my photos in the various albums etc., underneath and when I click on them they open as thumbnails underneath but iPhoto itself is still paralysed even after I quit the Bonusprint software.

When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630. plz help me

When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630, plz help me to update plz

My Iphone 4 crashed yesterday after a restart and upload of OS 5.0, it will only partially sync. It's not transferring any of my music or ringtones. They still appear when I click open the sync screens on ITunes, but I don't seem to have an Ipod function and only one of my personalized ringtones transfers on the actual phone.

Diff between Error,Warning and Abort message

Hi Friends
Can any body tell the Diff between Error,Warning and Abort message
Thanks

Error - Its the abnormal behaviour which was not expected. Its means the process has been hualted at this point. Unless and untill you resolve this, you can not procedd further.
Warnings: Its just the effect of a process it may have on other processes. You can continue doing irrespective of the warnings.
Abort : to terminate a computer processing or data transfer activity.
Thanks..
Shambhu

IPhoto 6 photocaste results in error and aborted action

Similar Messages

Maybe you are looking for