Iphoto 6 rebuilt thumbnails, now view by date is not working

The dates on the photos are still correct, but although I have "sort by date" checked off, there are recent photos that have appeared way back in the library. I've repaired permissions, restarted, and looked at every option in the menus, but can't figure out how to fix this. I first thought that the photos were missing, and then I found them back with the 2010 photos. Any suggestions would be appreciated.

So I found out how to clean this up. Make sure to replace "USER_NAME" with the right account name.
1. Remove Itunes, Quicktime, and Apple Mobile device Support.
2. Reboot PC
3. Delete C:\Program Files\Itunes Directory
4. Delete C:\Document and Settings\USER_NAME\Application Data\Apple Computer
5. Delete C:\Document and Settings\USER_NAME\Local Settings\Application Data\Apple Computer
6. Delete C:\Document and Settings\USER_NAME\Local Settings\Application Data\Apple
7. Reboot
8. Reinstall Itunes
This reset all of the settings and brought back the cover flow as well as keeping my existing files.
Obviously there was a easier way of doing this.. but a full clean install helps.

Similar Messages

I just updated to ios 6.1 and now my cellular data is not working

I just updated to ios 6.1 and now my cellular data is not working

UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
Cheers

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

My laptop keyboard is having problems. I took it if to change my bottom case it worked fine prior and then after just the power key worked. I cleaned everything nothing is bent in the cable. now my power key is not working

Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??

Back up all data.
Triple-click anywhere in the line below to select it:
pmset -g assertions
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks

I updated to 6.1.3 on my iPaad 1, and now my app store does not work. What should I do?

I updated to 6.1.3 on my iPad 1, and now my app store does not work. What should I do?

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

I just updated to the new software and now my app Store is not working It is just a white blank page

I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.

HT202157 Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Iphoto 6 rebuilt thumbnails, now view by date is not working

Similar Messages

Maybe you are looking for