IPhoto 6 - recurring pop-up window for digital camera

Starting a few months ago, I began getting this pop-up window every time I launch iPhoto:
No matter what I click or answer, this window pops up again every time I launch iPhoto.
Why is this happening and how do I get it to stop asking me? I work on an old PowerPC (OS 10.4.11, iPhoto 6.0.6 (322)). The pop-up window comes up irrespective of whether or not a digital camera or card reader is attached.

Rj in WI is correct. I just started using iTunes about a month ago after my wife got an IPod. It took me about an hour of frustration and reading the instruction before I saw in the bottom right of the window "my computer". You click on that and then you can change it to the Airport network. Unfortunately It appears you can only send to only one place. I have two Aiport Expresses and I can only send it to one of the Express devices, or the computer, but not to two or all three places at one time.

Similar Messages

Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into i

Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into it. Preselected music just goes on.

I am talking about iPhoto. In my old Mac even in Books choosing slideshow gives a pop up where you can select a music from I tunes library. In this new one I can stop the slideshow with cursor and it shows music option but it is, as I said dead. Does not response at all to commands.

How can I shut off all of the pop-up windows for all the Firefox updates?

How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
Help!
Thanks,
numetro

Is it possible that her computer is infected with malware.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

How to Suppress the POP UP window for Print out Device

Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.

On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device.

Pop up window for a single field details..

How to display a pop up window for details of one field by click?

hi,
chk this.
report zsha.
type-pools: slis.
data: begin of iku occurs 0,
      check type c,
      kunnr type kna1-kunnr,
      name1 type kna1-name1,
      end of iku.
data: ifldc type slis_t_fieldcat_alv .
data: xfldc type slis_fieldcat_alv .
select kunnr name1 into corresponding fields of table iku
        from kna1 up to 10 rows.
clear xfldc.
xfldc-reptext_ddic    = 'Customer'.
xfldc-fieldname = 'KUNNR'.
xfldc-tabname   = 'IKU'.
xfldc-outputlen = '12'.
append xfldc to ifldc.
clear xfldc.
xfldc-reptext_ddic    = 'Customer Name'.
xfldc-fieldname = 'NAME1'.
xfldc-tabname   = 'IKU'.
xfldc-outputlen = '30'.
append xfldc to ifldc.
call function 'REUSE_ALV_POPUP_TO_SELECT'
     exporting
          I_TITLE = 'This is the message here'
*          i_checkbox_fieldname = 'CHECK'
          i_tabname            = 'IKU'
          it_fieldcat          = ifldc
     tables
          t_outtab             = iku
     exceptions
          program_error        = 1
          others               = 2.
check sy-subrc = 0.
popup_with_table_display.
Usage:
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING ENDPOS_COL = 41
ENDPOS_ROW = 10
STARTPOS_COL = 1
STARTPOS_ROW = 1
TITLETEXT = TEXT-202
IMPORTING CHOISE = SEL_ROW
TABLES VALUETAB = ITAB
EXCEPTIONS OTHERS = 99.
IF SY-SUBRC EQ 0 AND SEL_ROW > 0.
READ TABLE ITAB INDEX SEL_ROW.
REF_NAME = ITAB-TABNAME.
ELSE.
REF_NAME = SPACE.
ENDIF.
Regards,
Anver

Why doesn't pop-up window for serial number open?

My mother has bought the Lightroom 5 CD and is installing it but for some reason when she clicks ther installed Lr icon as told in your instruction, the serial number is not requested. The whole window with the empty boxes for serial number does not appear. I'm not sure what she has done earlier but she is saying she hasn't been able to give any serial number to her Mac (she has had earlier version in other MAc but is facing major problems with this new Mac and Lightroom, she has had trial version in this Mac). So, could the problem be that she has removed some Adobe Acrobat reader, Java, Adobe ActiveX or something and that's why the pop up window for serial number does not appear or has she managed to activate something which is blocking something or if she has already put serial number somewhere could that be blocking the process? How to change the serial number? Does Lightroom require some other sw like cloud or sth?

Hi Sari,
Kindly try the below mentioned steps.
Launch Lightroom
Click on Help.
Click on Lightroom Registration
Follow the on screen instruction.
Thanks,
Atul Saini

ITunes 11: Pop-up windows for quick access on iTunes Store?

Anybody know what happend or how to get back pop-up windows for quick access on iTunes 11?
Please see link below for I mean:
itunes-store-adds-pop-up-windows-for-quick-access-to-content-details-and-preview s
Thanks.

Sounds like some security software is freaking out, because it's not been set up properly for iTunes.

Tried to download(offline) a book from EBSCOhost, it was successfully checked out but no pop out windows for downloading. Any thoughts? Thanks.

Tried to download(offline) a book from EBSCOhost, it was successfully checked out but no pop out windows for downloading. Any thoughts? Thanks.

Okay, you need to contact support definitely about what's going on. Here is a form that will send an e-mail into support for you:
http://www.apple.com/emea/support/itunes/contact.html
As far as the prices, the difference is likely the laptop version is the SD version and the iPad one is available in HD. That's the only reason you'll see a price difference. It has nothing to do with the device with movies/movie rentals. Apps yes, these no.

Why does the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappear, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions?

I am at http://www.closys.com/samples_&_coupons/get_a_coupon.html and the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappears, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions. What gives and how can it be fixed. I have a time limit.
Thanks for your solution.
Dan

Mha007:
Sorry, but I have already tried this too and verified that the web addresses are listed as Allow, rather than Block. After restart there was no difference, I still get the disappearing pop-up windows.
Thanks for offering suggestions though.
Have you heard of any issues like this occurring based on the number of tabs that are open in Firefox?
Just a thought, even though I have not heard of this as an issue before. I keep about 80 tabs open regularly, because of research that I am always conducting (I am a blogger, a writer/author, a technophile-especially Green Tech.,), email, work, etc.?
I do have a check in the box for Firefox to let me know if the number of open tabs is causing slow down or other issues.
Thanks for any help.

Snow Leopard does not auto adjust time for digital camera

For some reason when I connected my digital camera this morning to auto adjust its time to reflect DST I ended up having to do it manually. Is this not a feature of SL? I did this a hundred times in Tiger without hassles. Maybe I am missing something. I am not using iPhoto for my imports.

I'm curious what software you are referring to. I doubt this is the fault of SL but rather a change in the Canon software. I know Canon's "Camera Window" has changed over the last while if that is what you are referring to but I don't remember seeing a time setting in it ever. Can you look back at the name and version of the software you are referring to?

Safari: Pop-up windows for "Mac Keeper"; Random search results and ads everywhere!

Please help! A very annoying pop up window called "Mac Keeper" keeps popping up.
Also, when i search something in google; or any search engine; I will get random results.

There are two possibilities: either the router has been hacked to direct DNS queries to a malicious server, or it's using the right DNS servers, but those servers have been hacked. The first possibility is more likely.
Follow the manufacturer's instructions to reset the router to the default state. Usually that involves inserting the end of a straightened paper clip or a similar tool into a pinhole somewhere in the back of the device, and pressing a switch inside for about 15 seconds. The pinhole may be marked "RESET."
Repeat the initial setup process. Make sure the router does not allow remote setup from the Internet (WAN port), if it has that feature—most do. The DNS servers should be set automatically by your ISP. If you still have trouble with those servers selected, contact your ISP.
Another option, if your ISP fails to secure its servers promptly, is to use an alternative DNS service such as Google DNS or OpenDNS. I don't recommend either one. Don't believe the marketing hype about OpenDNS, in particular. There are no advantages to using it if your ISP is delivering the service you pay for.
If you have a wireless network, it must be secured with WPA 2 encryption. The passwords for the network and the router must each be a string of at least 10 random upper- and lower-case letters and digits, and they should be different. Any password that you can remember is weak.

Photoshop CS5 disables autoplay for digital camera?

I just received and installed Photoshop CS5 Upgrade a couple days ago. Software seems to be working fine. However, I've noticed that when I plug in my DSLR (Canon EOS 5D Mark II), it will not auto-launch any application assigned to it. Typically, it should launch the EOS Utility so I can select and download my RAW files. The camera is detected by Windows, so it's not a driver problem. And, I can still launch the EOS Utility and download images manually.
When I uninstall CS5, it auto-launches just fine, so something funky is going on with CS5. I've confirmed the same behavior with my wife's camera (EOS 30D) and my point-and-shoot camera (Canon SD1100 IS). None of them will auto-launch their respective applications. I've also tried resetting the autoplay defaults as well as reassigning the applications associated with each camera. Nothing seems to affect this behavior.
I was previously using Photoshop CS2 with no problems. I'm running Windows 7 Professional x64 and the following hardware:
Asus P6T Deluxe v2 motherboard
Intel Core i7 950
12GB DDR3
NVIDIA GeForce GTX285
Is there a setting in Photoshop or Bridge that is causing this? Thanks in advance.

Hi Curt,
Thanks for the reply. Card reader autoplay works fine, as does most (if not all) other autoplay devices. It seems to be digital cameras that aren't behaving correctly. I prefer to use the EOS Utility over a standard card reader since it gives me the ability to catalog my photos by shooting date (or other criteria) automatically. I also use it for Live View shooting, so having it load automatically when the camera is connected is a convenient feature.
However, I'm now suspecting it's not Photoshop CS5 that's the culprit. I installed CS5 on my laptop and autoplay works fine with all of my cameras. So, something else is afoot with my desktop PC.

No Item Info (resolution) for Digital Camera photos?

Hi,
Just imported some photos off my Canon digital camera into my iMac using Image Capture. Looking at at all the Icons for the photos in Finder, I've noticed none of them have their resolution written below them, even though I've got "Show Item Info" ticked.
If someone can explain to me why this, I'd like to know. Any pictures I download from the Internet automatically have their resolution written below them in Finder. But for photos that've come from my own camera, they don't.

The only time I see this is when the images are in a folder that is not indexed by Spotlight. Thus, I have a folder on a drive that has Spotlight disabled for that drive, and the same folder on my startup drive. The pixel dimensions appear when I open the folder my startup drive, they do NOT appear when I open the folder on the other drive. If the folder the pix are in is excluded from Spotlight search you won't see the dimensions displayed in the Finder window. I would guess that the folder the downloaded items are in is indexed, the one from the camera is not.
Francine
Francine
Schwieder

How can I override pop-up windows for a specific site?

In Firefox for Mac and Internet Explorer on a PC, you can turn off pop windows, but authorize specific sites to open a pop-up window. Is there a work around in Safari? The simple on/off switch (command-shift-k) is not adequate. I'd like to use just one browser, instead of using one for general surfing, and another for sites I log into that open various pop ups as I navigate.
Safari is fast, but at a functional cost.

Adblock keeps popping up as a suspect in Safari crash logs, so I'm a little nervous about it. Glims seems to have a better rep for Safari-friendliness and I believe it offers selective ad blocking:
Glims for Safari | www.MacHangout.com
You can also try the Camino. browser, From the Mozilla crew, it is Mac-only and much leaner and faster than FireFox. The interface is very close to Safari, unlike FireFox's rather Windows-centric approach. You can selectively block or allow both cookies and pop-ups. It's my backup browser and my wife's primary browser.

IPhoto 6 - recurring pop-up window for digital camera

Similar Messages

Maybe you are looking for