IPhoto 6 starts automatically after reboot, how to avoid ?

Every time I reboot my Imac, Iphoto starts automatically.
It is not active in Accounts / Login Items
Also no camera is attached to the computer; The settings for ImageCapture are to launch EOS Utility if a camera would be attached.
Any clues ?
Thanks,

Xinram
Right click on the iPhoto icon in the Dock, see if 'Open at Log in' is checked.
Do you have a FAT format disk or USB flash drive connected to the Mac?
Regards
TD

Similar Messages

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Ovs-agent starts automatically after reboot but hostname isnt resolvable

Hello Guys,
the theme is the problem. After rebooting a server the ovs-agent starts automatically but the DNS-Name of the SR isnt resolvable.
If I restart the agent by hand everything works fine. I checked the /etc/init.d, where its installed and the rc3.d. ovs-agent got S99 - which means, it starts last.
But which service is responsible for DNS? In my eyes the only thing that must be up, is networking, isnt it?
Do you have any hints for me?
Greetz

Please check your /etc/hosts and make sure that the hostname is on a separate line and not mapped to 127.0.0.1

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

CUE 8.0(1) unable to start automatically after reboot CME

Hi
I have an issue with CUE (ISM) 8.0.1
When the router has been reboot it then the CUE module its not restarted Automatically
I have to login on cue module via cli and write the command BOOT DISK in order to start the CUE module
ServicesEngine boot-loader> boot disk
Loading disk:/bzImage ... Verifying ... done.
Starting Kernel.
Pls Advice
thanks

Hi Paolo
could you pls give me a dogumentation or something for the boot loader?
i didnt find anything
thank you

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Starting OC4J_BI_FORMS automatically after reboot on Win2000

Does any know how to configure OCJ4_BI_FORMS to startup
automatically after rebooting on win2000. Now, I'm manually starting the OC4J_BI_FORMS instance, and would like to automate the startup after reboot.
Thanks in advance
Joe

I think it's controlled by auto-start for your application in %ora9ias_home%\j2ee\OC4J_BI_Forms\config\server.xml.
Reference: http://download-west.oracle.com/docs/cd/A97329_01/web.902/a95880/apdx_a.htm
Yong Huang

How to startup 10G automatically after reboot????

How to startup 10G automatically after reboot????
Is the same thing that we did with 9i?
Create a script e link this on /etc/rc......?? Is that?
Please send me an example.
Tks,
Paulo Portugal.

Yes, use /etc/rc. The following are 3 start scripts. Modify it to fit it into /etc/rc start/stop model.
==> 1. start the DB:
#!/bin/ksh
# ==> start the DB:
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
lsnrctl start
lsnrctl status
PASSWD=`cat $HOME/xadv1/sh/system_passwd.pwd`
sqlplus /nolog<<EOF
connect SYSTEM/$PASSWD as SYSDBA
startup
EOF
#!/bin/ksh
# ==> 2. start infra HTTP
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_infra
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
export LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
export PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status
#!/bin/ksh
# ==> 3. start iAS
ORACLE_SID=xadv1
export ORACLE_SID
ORACLE_HOME=/software/xadv1_ias
export ORACLE_HOME
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORIG_LD_LIBRARY_PATH
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORIG_PATH
echo "############# Starting OPMN ############################"
opmnctl startall
echo "############# Starting EM ############################"
emctl start iasconsole
echo "############# OPMN Status ############################"
opmnctl status

Automatically start oracle after reboot

Is there a way to automatically start oracle after reboot? Our platform is Soaris 10 and Oracle 10.2.0.1.0

(1) Don't forget to edit $ORACLE_HOME/bin/dbstart. (Note:337927.1)
Original line:
ORATAB=/etc/oratab
Modified line:
ORATAB=/var/opt/oracle/oratab
(2) As per Note:336299.1 use:
dbstart $ORACLE_HOME
or
dbstart /u01/app/oracle/product/10.2.0 (or whatever is your Oracle_Home)
or you'll get: "ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener"
HTH
Enrique

Why Portage R700-15P starts automatically after hibernation

Why TOSHIBA Portage R700-15P starts automatically after I hibernate it (or put on sleep) and close the lid?
As soon as I take hibernated laptop with closed lid in my hands to put it into bag - it starts by itself with closed lid...
Had anybody similar issue and solution for this?
Thanks

> Is there any setting for laptop or Windows 7 that does not resumes laptop from hibernate/sleep state when lid is closed?
First of all its not matter if the lid is closed or not one fact is important: notebook is set in hibernation mode and wakes up if USB mouse would be moved
Fact is that BIOS contains some Wake Up options you should check the BIOS settings like Wake Up on LAN, Wake up on keyboard etc disable these options, save the changes and check how it works

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Since 10.4.9 update: postfix needs to be started manually after reboot

Although mail services are all activated in Server Admin, postfix refuses to start up automatically after a system reboot.
All I need to do, is open a Terminal window and type "postfix start" and all is well.
The problem is, if we have a power outage or something else, then mail reception and sending is off-line until I discover that the server has rebooted itself, and I type in the commands again.
What could prevent postfix from starting up?
Ronald

Hi,
below the output of the commands, only the IP address in the range of the netmask was replaced with 12.34.56 and the domain name was replaced with domain.
The only strange thing is this line:
smtpdclientrestrictions = permit_mynetworks permit
which is the only line in which the parameters are not comma separated.
But why that would stop automatic startup, while manual startup works, is beyond me.
I also should add, I didn't mess with any config files except by proxy of Server Admin, since I'm more than aware of the fragile nature of such software dealing with such alterations.
Thanks for your help.
Ronald
[tigger:~] root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains = dun.dnsrbl.net,spam.dnsrbl.net,bl.spamcop.net,dynablock.easynet.nl,proxies.blac kholes.easynet.nl,cbl.abuseat.org,sbl.spamhaus.org,dnsbl.njabl.org,relays.ordb.o rg,opm.blitzed.org
masquerade_domains = domain.com
messagesizelimit = 26214400
mydestination = $myhostname,localhost.$mydomain,smtp,pop,imap,mailhost,domain.com,smtp.domain.c om,pop.domain.com,imap.domain.com,mail.domain.com,mailhost.domain.com,mail,local host,localhost.domain.com,127.0.0.1
mydomain = domain.com
mydomain_fallback = localhost
myhostname = smtp.domain.com
mynetworks = 127.0.0.0/8,12.34.56.96/27,12.34.56.64/27,12.34.56.32/27,12.34.56.192/27,12.34. 56.128/27,12.34.56.0/27,66.92.70.119/32,128.148.0.0/16,212.227.94.95/32,10.0.136 .0/24,207.210.106.210,61.222.108.90,140.211.11.2
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks permit
smtpdenforcetls = no
smtpdpw_server_securityoptions = plain,login,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/DomainSSL.crt
smtpdtls_keyfile = /etc/certificates/DomainSSL.key
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
[tigger:~] root# ps -U clamav
PID TT STAT TIME COMMAND
66 ?? Ss 0:15.81 amavisd (master)
188 ?? Ss 0:00.82 freshclam -d -D -pfreshclam.pid -c 1
9683 ?? S 0:07.97 amavisd (ch8-avail)
9795 ?? S 0:09.19 amavisd (ch7-avail)
[tigger:~] root#

Messaging Server/UNIX: Starts automatically after installation

How can I configure Messaging Server to run automatically on startup?

In most cases, Messaging Server for UNIX will run at startup automatically.

Most UNIX systems have a start script that includes a line that starts sendmail
as a server (/usr/lib/sendmail -bd) automatically.
Howver, when Messaging Server is installed, it replaces several mail utilities (mailq,
processq, and sendmail), with links to our sendmail binary
(<ServerRoot>/bin/msg/admin/bin/sendmail).
Therefore, Messaging Server, rather than sendmail, starts when
your system starts.

This can be confusing to administrators of other Netscape servers since
most other Netscape servers are not installed to start automatically.

Note:

This does not take effect until the system is fully restarted. After
installing Messaging Server, restart the system before attempting to start
Messaging Server. Sendmail is usually already running, and the installer does
not kill the sendmail process.

If you start Messaging Server without
restarting, smtpd will not start due to a port conflict.

Hi Leo, thank you for your help
This:
I have tried the suggestion above (clear the "Run task as soon as possible after a scheduled start is missed" checkbox) and it does the trick for me. However on the Home/Get Started/Set up screen the "Set up Server Backup" task is then reset to outstanding
while the .../Quick Status screen shows "Server Backup ON".
Is a working work around till a real update or hotfix is released

IPhoto 6 starts automatically after reboot, how to avoid ?

Similar Messages

Maybe you are looking for