IPhoto 7: Menu Selections Gray, Photos Don't Show

Trying to install iPhoto 7 (iLife '08) on my dad's iMac G4 (1 GHz, PowerPC, 768 MB RAM, OS 10.4.11) -- ignore the computer info below as that's my own computer, not the one on which I'm trying to install iPhoto.
According to the package and Apple's web site, iPhoto 7 should work on this computer. However, after installing and running iPhoto, the photo library doesn't open and almost all menu selections are gray. I have tried following Apple's instructions for rebuilding the library (holding down Command-Option while starting) and that does not happen. I have tried updating iPhoto 7 to 7.1.4 and the same things happen. I can select the Help menu. I can also select the Preferences menu item but the Preference panel does not open. I can quit iPhoto. That's about it.
I tried rebuilding the old library (iPhoto 2.01) and reinstalling iPhoto 7. Nothing changed. I tried using iPhoto Library Manager to rebuild the library and that made no difference. I cannot manually import photos from the old library because the menu selections don't work.
What am I missing?

Terence -- I really appreciate the time you're taking to try to help me.
I upgraded iPhoto all the way to 7.1.5. Nothing changed.
Per Apple's instructions for rebuilding the photo library, I launched iPhoto holding down the Command-Option keys. Nothing changed -- the library was not rebuilt as far as I could tell.
I tried launching iPhoto with just the Option key pressed as you suggested. Nothing changed -- no menu.
Every time I launch iPhoto, I get the opening splash screen that, if clicked, takes me to the iPhoto page of Apple.com.
Could this be an operating system problem? Do I need to try to reinstall OS 10.4.x and then upgrade back to 10.4.11? I would need to do an "Archive and Install" since I would be installing an earlier version of the OS over the current, older version. If I need to do that, what issues am I facing in order to get the settings (System Preferences, etc.) back to where they are now?

Similar Messages

  • I have a Nikon S6300 and when I import into iPhoto the photos don't show up in events or photos only in recent imports

    I just purchased a Nikon S6300 camera and when I import into iPhoto the photos don't show up in either photos or events only in recent imports. 
    I have Snow Leopard on my MacMini.

    Control-click one of the photos under the Recent import and select "Show Event" in the contextual menu. Or you can use the View ➙ Sort Events menu in the Events mode to reset the sort order so the new import will be either at the top or bottom of the list.
    OT

  • Photos don't show up in file name order

    Photos don't show up in file name order on the iPad. Is there a way to do it?

    Apparently from reading other forum posts Apple iPad sorts photos by the date stamp.
    Clearly this is not suitable or feasable for people with large photo collections. Currently only people with Apple OS (iPhoto can create a sort order).. The rest of us with Windows based systems are left high & dry.
    Does anyone know how to report a bug / problem to Apple ? They have no way of contacting them via email.
    They need to have the sorting option in iTunes or within the iPad software itself... ie. Allow sorting by file name, etc.

  • After installing latest update the contact photos don't show on incoming call

    After installing latest update the contact photos don't show on incoming call

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • HT201269 I downloaded the iOS7, lost all the custom ring tones that I had on my phone, how do i get them back.  when I sync my phone, itunes says that they have been selected, but they don't show up on my phone

    I downloaded the iOS7, lost all the custom ring tones that I had on my phone.  the iTunes sync page says that they have all been selected but they don't show up in my phone? Help?

    I had the same problem and was able to fix it. Go to your iTunes and click on the Tones folder on the left under library. Some of my ring tones had an exclamation mark next to it and those were the ones that did not sync. You have to click on those and find it in your computer. Once the exclamation mark is gone, go to Tones section of your device in iTunes, make sure you select the tones you want synced, and click apply. I hope that helps you!

  • Some photos don't show in LIbrary view--just the outlines of them

    Tonight I tried to transfer a bunch of digital photos from a CD my daughter burned into my iPhoto library, into the 2006 year folder.
    I opened the CD and in the icon view, the pictures looked fine--jpeg files.
    After I transferred them, these pictures don't show in my initial iPhoto window (the one that opens first when you click on iPhoto in the Dock, and shows all the pictures in my Library sorted by (in my case) roll/date.
    Then photo thumbnails from years prior to 2005 show up, fine, but for the most recent year of pictures, all I get are the outlines of where the thumbnails ought to show. When I click on one of the blank thumbnails, of course I get a blank ...but the frame in the lower left shows the ID info for the picture and the picture counts, etc.
    I can open the folders from the Pictures file and see them...they just won't show up in the overall Library window.
    So...I moved the transferred ones out of the iPhoto library and just put them in the Pictures folder for now.
    But what did I do? And how do I "fix it" to make all the thumbnails show up again? This is probably some simple thing...but I can't figure it out. I tried showing just the last 12 months...and I get all the blank outlines.
    G4 iBook   Mac OS X (10.3.9)   Using iPhoto 5, 768MB RAM,

    Hi john,
    First problem. You need to import photos into the iPhoto Library the correct way which is while iPhoto is open. Drag the photos out of where you put them (you already did) now you can import them into iPhoto from there.
    Read on for more info....--First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
    If you have already put files/folders in the iPhoto Library folder in the Finder then you will also find out that if you try to import them into iPhoto you will get an error message. No worry, just drag them to the desktop and import from there.
    --All images that you import are shown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database and your hard drive (unless you have it backed up somewhere else)
    --You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
    -- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
    You want all your photos in iPhoto so you import them into iPhoto.
    Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
    -- You download pictures from your camera into iPhoto.
    There is now one copy of each of the pictures. (DO NOT HAVE IPHOTO DELETE THE IMAGES FROM YOUR CAMERA! DELETE THEM MANUALLY WITH THE CAMERA-if something goes wrong with the import and they are never imported and then they are deleted from the camera you might end up losing those images)
    You want to change something about a picture you imported, such as
    cropping it or changing the size, or changing the orientation.
    Once you do that to a picture, you now have two copies of the picture
    in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
    (a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
    3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
    You can open up prefs for iPhoto and choose "when double clicking on
    photo ..do" choose "other" and select Photoshop. Now you can edit all
    pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
    Or, with iPhoto open, you can drag a picture from the library window
    to your desktop (you see a + sign on the pic you are dragging). You now
    have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
    Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
    picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
    I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    Don't forget that in Library view you can Control click on any picture and get a contextual menu with many options. One is to revert to original.
    Now to get to your next problem...do a "get info" on your iPhoto Library folder.
    Get info on the iPhoto Library folder
    Make sure the owner is you and you have read/write" permission. If not, click the lock to unlock and change to you as the owner with Read/write. Click the button at the bottom.
    iPhoto Library Info
    Get back with results or any more info.

  • Aperture photos don't show on iTunes synch

    Synching with iPhoto works fine, butI can't see any photos when attempting to synch to Aperture. As noted in another post, Projects don't show up. It does see smart albums, but with a zero photo count for all. Any thoughts on why? Do Aperture photos have to be managed in the library vs referenced in order to be seen and synched? [All of my photos are references to outside image files.] Does it matter that the Aperture library is maintained in a non-standard location?
    //Chris Freeborn
    Dual2.7G5   Mac OS X (10.4.9)   6GB/2x400GB

    in the photos tab of the A-TV setup, there's a label near the top that says, "Sync photos from:" and a pull-down menu next to it. from here you can choose either iPhoto or Aperture. you have to have Aperture selected in order to sync them and see your albums.
    also, make sure that you've got at least Aperture 1.5, but preferably 1.5.2 and that you've got previews turned on and being generated for new albums. finally, there's also a setting in the preferences to share the previews with other iLife apps. i think iTunes needs that to be able to see/sync photos.
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.8)   MacBook Pro 2.0GHz

  • New Photos Don't Show On My Apple TV -- Is There a limit? An "Update" button? ...?

    I have my Apple TV 2nd gen set so that after two minutes is shows photos from my computer as screensaver.
    I have an album in iPhoto where I drag the photos I want and I've told the Apple TV to pick up those photos.  Has always worked fine.
    Recently I added some pictures to that album but they don't show on the Apple TV -- just the previous photos are on display.  Is there a limit?  There are 94 photos in that album.  Have I forgotten some sort of "update" button? ...
    All the settings both on the Apple TV and my iTunes look fine and I recently ran whatever update Apple wanted me to (I had this photo hiccup both before and after that upgrade so that ain't it).
    Any suggestions?
    Thanks

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • How to select certain photos/events to show up on desktop?

      I would like to select certain event folders from IPhoto to show up on my desktop screen saver. Is there a way to do that?  My problem, is that certain photo's show up that I may have even deleted? Annoying. At times, I may do some editing and IMovie projects for friends and their photo's may show up on my screen saver.  Want this to be more personal, pertaining to my family.  How do I accomplish this? Please, detail the procedure on doing the process if it can be done. Thanks.

    Welcome to Apple Support Communities. We're users here and don't speak for "Apple Inc."
    Here's how I do it:
    In iPhoto, I edit the images as necessary. Then I flag (Command + .) those images I want to use.
    They are automatically gathered into the 'Flagged' group under Recent within iPhoto.
    By flagging, I'm not limited to just selecting photos from a single event.
    When I've flagged all the images, (Command + .) I select the Flagged group and simply export the flagged photos I want to use into a Folder named 'Screen Saver Photos' on my desktop. (Original name, eh?) Then link to it from System Preferences, Screen Saver, Source:
    On a 500GB or 1TB drive, duplicating even a few hundred 5MB .jpg photos for this purpose isn't going to use much of the available space. When I'm ready for a new look, I delete the files in 'Screen Saver Photos' folder and start over once again.

  • Photos don't show up in iMovie

    I have photos in events in iPhoto that don't show up when I try adding them in in iMovie. any idea what the problem is? I can see them as I look at them in iPhoto but I try putting them into iMovie and they are no where to be found. Help please! I dragged them into the iPhoto application and it said importing, shows them in there. I don't get it?

    I have photos in events in iPhoto that don't show up when I try adding them in in iMovie. any idea what the problem is? I can see them as I look at them in iPhoto but I try putting them into iMovie and they are no where to be found. Help please! I dragged them into the iPhoto application and it said importing, shows them in there. I don't get it?

  • Iphoto 7.1.3. - pictures don't show even though they exist & library=fine

    Hi all
    got a crazy problem here, that seems to have originated from updating to 7.1.3 last week.
    I cannot see my photos anymore. I see events, photos, see the Info of a photo, but Iphoto displays blanks instead of pictures.
    Examining the package shows me that the photos do exist in their managed folders.
    I tried rebuilding the db, rebuilding thumbnails, etc. Nothing shows the photos.
    I tried restoring older libraries of a couple of weeks old (timemachine) but they don't show anything also. This leads me to believe that this version of iphoto seems to be broken. Maybe I can try downgrading (don't know how though)
    Anybody have some suggestions? any help is much appreciated.
    -arjan

    arjan
    Welcome to the Apple Discussions.
    This version of iPhoto works fine, it's your database that has been damaged.
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Indesign CS5.5 can't select objects, they don't show in layers panel either

    I received an .indd file from a client. There are certain objects that I can't select. I know they aren't locked because I can't select "Unlock all on spread." The weird thing is, the objects don't show up in the layer panel. If I uncheck the layer's eye, they disappear. But if I uncheck the eyes of all the individual objects within the layer, the objects I can't select are still visible. I'm attaching a screenshot. Can someone help please?

    The items are on a mster page.
    In the Pages Panel, go to the master associated with the page you're on, there you'll find the things you're after.

  • Using iOS6 to upload my photos to Facebook. Photos don't show up on my wall.

    Hi there,
    I'm having problems using the iOS 6.1 to post photos on Facebook. Normally what I would do is select a photo from my camera roll and post that photo on my FB wall through the iOS "share" feature.
    Lately, this hasn't been working for me. The photos do get uploaded, but they appear in the iOS photo album and not on my wall.
    Would you guys know how to solve this problem?
    Thanks a lot.

    I believe that is how it works now, if the new FB update.
    Any question you have re: facebook, you should take it up with the developer or look at their support site.
    This has nothing to do with Apple or the iphone itself.

  • Canmera roll photos don't show

    ipad Air, newest PS Touch
    When I want to add photos from my camera roll many of the photos I have there don't show via PS Touch. Can someone explain how to make this work? It's quite annoying.
    Thanks!

    Guido,
    Thanks for the reply.
    They are photos I had taken with a Canon then loaded onto the iPad with camera attachment thing. They show in my camera role but now when using PS.I cant see them. (Some are there but not the ones I wanted.) I had already enabled the "use native viewer" and I can't see that it helped.
    Thanks for any suggestions you might have!

  • Slideshow photos don't show up-however they appear on the lower scrolling menu and

    In IPhoto 11.. I can't see any of my 379 pictures in the slideshow format, however when I scroll down the sidebar they appear momentarily, and then vanish,
    they also appear in the bottom scrolling menu on the slideshow screen.  I haven't had this problem until recently..

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    launch iPhoto with the Command+Option keys held down and rebuild the library.
    select the options identified in the screenshot.
    Click to view full size
    OT

Maybe you are looking for

  • Bleed not showing in exported PDF

    I'm submitting a postcard design to hotcards.com and am worried because the bleeds that I have are not showing when I create the PDF. I've included the crop marks when exporting (and checked 'bleed marks'.) Don't know if I should submit with the crop

  • Call to WPG_SESSION API Failed. Error-Code:20000

    Hi, to be short: Oracle: 8.1.7.0.0 When trying to login to the portal application I got this error [bottom of message] I downloaded the diag tool and run it against my configuration, everything was reported OK. I've also searched all through this for

  • Offline Approval in SRM 5.0

    Dear Experts, Can you please clarify below questions regarding offline approvals as i am doing first time this activity. 1)I have created the shopping cart and shecduled  program RBBP_NOTIFICATION_OFFAPP executed. 2) approver received an email with a

  • Print Digital Signature

    Hi Experts, I've setup the digital signature for certain document types. Now when I print those signed document, am not able to get the approver's signature on print out. From the SAP Help I found below link and it says that I've setup ' allowed' or

  • Firefox is hanging very frequently, on all pages(infact, hung while typing this)-version is 6.02.

    Have been having frequent hangups the last couple of weeks, on all pages. Started on Facebook with the app Bubble something(forgot the exact name since I have since deleted it). I ran a full system scan(Norton 360 v 5)clean, deleted Firefox(6.02)from