IPhoto 8.1.2(424) just will not quit.  Even after rebuilding library

I am using iPhoto on a shared folder between two users. Somehow my iPhoto just will not quit. I tried Command option to start iPhoto to rebuild the library but it still did not work.
the only way I can quit is to force quit it. Any help will be great. Thanks.

Make sure the other user is not using the library at the same time. Create a test library, add a couple of photos in it, put in the same shared folder and try it.
OT

Similar Messages

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • System Preferences will not quit even using force quit

    My iMac recently froze completely, tried rebooting from recovery but that itself says it has problems and needs repairing, System Preferences is open at all time and will not quit, even using force quit!

    Post a screen shot of the message that says it needs repairing.

  • App will not open even after reinstallation

    How do I resolve this?  Reinstalled multiple times, tried shuttting iPad down, is it a settings issue??  Running iOS 5.1.1 still, is that the issue?

    I'm sorry to hear that you have trouble running
    PS Touch.  Please try to install via iTunes. This normaly helps.
    -Guido
    Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
    Re: App will not open even after reinstallation
    created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

  • My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

  • My ipod will not open even after following instructions online

    my ipod will not open even after following instructions online

    Do you mean you can't unlock it?
    We have no way of knowing exactly which online instructions you may have tried.
    Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
    iPod touch: Hardware troubleshooting

  • Spoken work files will not play even after importing/converting?

    I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
    Any ideas of anything I can do?
    Thanks.

    I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

  • Safari will not open, even after reboot

    I have been having all sorts of problems with my iMac since installing Mavericks (Gmail integration was freezing everything, Maps just didn't work).
    The latest is that Safari just will not open, period. I have rebooted several times and even reinstalled OS X via the Cmd+R on reboot, nothing. It hangs upon opening and needs a Force Quit. When restarting again, it asks if you want to reopen windows and it makes no difference if you say Yes or No.
    Any ideas on what to do?

    Try deleting the com.apple.Safari.plist
    Quit the application.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    Thanks to leonie for some information contained in this.
    You might need to redo the View settings after an update.

  • Permissions will not set, even after using terminal commands?

    Hey,
    I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server.  These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders.  This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password.  Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
    The story is:  We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server.  the permissions did not really need to be set on that volume because they had carried over from the last time they were shared.  But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server.  But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
    Please Help!

    Hi ..
    Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

  • IPhoto will not open even after installation

    After importing some photo images from a CD and beginning to edit (red eyes) a few of them, *iPhoto hung up* with the spinning ball. So, I tried to close the application and even shut down the iMac without success. Eventually, I just shut down the iMac using the on/off switch in the back of the globe. After starting it up again, I tried to restart iPhoto without success. Now iPhoto just won't open up. I have tried the MacOS X disk utilities at least twice; and I have used DiskWarrior without impact. I have removed and reinstalled iPhoto 4.0.1 from the iLife disk three times unsuccessfully. At this stage every time I try to start iPhoto, the unpopulated iPhoto screen (no images shown) appears then seems to time out and quit. *I have a LaCie storage disk with pretty recent saves, including the iPhoto and its library.* But, when I tried to transfer that latest iPhoto copy to the iMac, it would not seem to work. Anyone have useful ideas for me?

    I've corrected one problem and generated another, I'm afraid. I could not seem to load the iPhoto files, even though the screen said it was loading. So, I followed a suggestion found on this forum to restart iPhoto and create a new photo library first, then drag the older photo library folder into that newer folder. It did not specify whether I should select all folder contents, copy, and drag into that new folder or merely to drag the old iPhoto Library folder inside the new one. I chose the latter. Once that happened, iPhoto restarted nicely but spent hours repairing the photo library. It seems to have corrected several image date problems I'd always noted, but now I'm left with the dilemma of deciding which photo library to use. I no longer have the albums within the iPhoto displays when I open iPhoto; and all images show they were made and imported today. In the previous process, another photo library emerged with a "-1" appended to it. Its contents seem to be correct, but when I specify for iPhoto to use that new photo library_1, the iPhoto contents appear to be empty. At this moment, I'm reloading the newest iPhoto Library-new using the select-all, copy, and drag the contents into it to see whether my albums will appear this time. Before I restart or do anything else which might jeopardize success, any suggestions?

  • IPhoto Will not Load even after reinstall

    All of a sudden, iphoto will not load....I receive this error:
    Iphoto cannot be loaded because of a problem.
    Check with the developer to make sure that iphoto works with this version of Mac OS X. You may need to reinstall the application.  Be sure to install any available updates for the application and Mac OS X.
    I reinstalled iphoto from the disk (so now I have iphoto and iphone (original) .....i reboot and then try to access the new iphoto....same error.  iphoto library appears ok. I can still attach a pic via "photo browser" button in email. 
    Details are below:
    Process:         iPhoto [240]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         ??? (???)
    Build Info:      iPhotoProject-4750000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [148]
    Date/Time:       2012-03-13 21:32:11.581 -0400
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          91733 sec
    Crashes Since Last Report:           9
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                      3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
    Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0xfa120000 / 5
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa130000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 3

    ok, I trashed all of the receipts related to iphoto (once i knew to search on "iphoto receipts" this is what everyone said).  I relaoded from the ilife '11 disk.....tried to load iphoto and got what you see below...same exact issue.
    Process:         iPhoto [3516]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         ??? (???)
    Build Info:      iPhotoProject-4750000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [148]
    Date/Time:       2012-03-15 19:31:40.175 -0400
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          175963 sec
    Crashes Since Last Report:           29
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898, 3.5 GB
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0xfa120000 / 5
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa130000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Composite Device, 0x0461  (Primax Electronics), 0x4d03, 0xfd130000 / 5
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 3

  • Black ink cartridge will not print even after installing a new cartridge

    my black ink cartridge is brand new and will not produce any print.    The other 3 color cartridges are also new and they print fine.  The set up cartridge is out of ink.  Is it needed once the printer has been set up?

    Hello rhergnal,
    Welcome to the HP Forums.
    I see that you are having some issues with printing in black.
    Just so you are aware, you do not need to keep the starter ink cartridge once it has been used.  It will not be needed again.
    Please click on the following link that deals with when the Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Premium e-Al....
    Please feel free to write me back if you have any other questions or concerns.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I bought a movie on itunes and it will not play even after re-downloading it.

    I bought a movie on itunes, it would not play. I contacted apple support people, and they told me to delete and re download it, I did that and it still will not play, I don't know if I'm doing something wrong or if my itunes isn't up to date, or maybe it's because I'm not trying to play it on an apple device. Whatever the case me be, I just really want to watch this movie, or get a refund.

    You should be able to play films on windows computers, if it wasn't compatible with it (e.g. you should have got an error if you tried to buy an HD film on non-HD compatible computer).
    The current version of iTunes is 11.4 - you can see if there are any updates available via the Help > Check For Updates menu option.
    Or you can download the current version of iTunes from here : http://www.apple.com/itunes/download/
    What happens when you try to play the film, and do other videos that you have in your iTunes play ok ?
    If you can't get it to play but other videos play ok then contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com

  • ITunes will not quit - even "Force Quit"

    When I installed the 8.0.1 patch on my iMac, I noticed that iTunes quit working correctly after importing some new tracks. It would not quit. I had to force quit but then it would not open correctly the next time and it would not quit. From that point on, my computer went down hill. When I installed the latest security patch and executed a reboot, the system would not come up. I used my 10.5 DVD and repaired permissions, etc. Nothing worked. I booted off my backup drive and everything works fine.
    Tonight I experienced the same issue with iTunes not quitting on my MacBook Pro !
    I have been a Mac user since my Mac Plus so I know what I am doing. I also have 15 years experience as a Solaris sys admin.

    Do you have SRS iWOW installed?
    Before the latest update you could just turn it off, and it wasn't a problem. Now it's a problem whether its on or off.
    SRS iWOW starts a process called "genredetection" that checks the status of iTunes, and if it's not running, launches it. I kill genredetection (sometimes there are several instances of it running if iTunes was relaunched) Then iTunes will quit. There is information on SRS iWOWs website. They are aware of the problem.

Maybe you are looking for

  • HP Photosmart C4585 - can't print test pages + copies are all reduced in size

    I have 2 problems with an HP Photosmart C4585 All-in-one printer. Firstly, I cannot print test prints ie 'Network Configuration Page' and the 'Run Wireless Network Test' page. It sounds as though it's printing but it produces blank sheets. Secondly,

  • Transfer from Adobe Photoshop Elements 6 on Windows XP to Adobe Photoshop Elements 12 on the Mac.

    I want to transfer from Adobe Photoshop Elements 6 on Windows XP to Adobe Photoshop Elements 12 on the Mac. My problem is I have lost my catalog and Windows XP.  I need help. I have installed the newest Mac version of Adobe Photoshop Elements 12 (PSE

  • OSX 10.9.2 problems

    I have a Mac Mini with a Samsung monitor.  Sometimes when I start up, I get a full screen.  Most of the time I get a 1.5" black bar on both sides of the screen. This has been appearing since I upgraded my OSX to 10.9.2.  Also, some windows don't show

  • Logical to Relational mapping

    Is it possible to define mapping between Logical and Relational objects (Entity->Table, Attribute->Column) manually?

  • 9360 curve, Bluetooth and Wi-Fi not working

    I kindly need assistance with my 9360 curve, for starters , every time i enable the Bluetooth the phone freezes, and the phone switches of and reboots up. Secondly everytime i enable the Wi-Fi in the drop down menu , the wheel is constantly spinning,