IPhoto 8.1.2 freezing during slideshow creation

I haven't got Lion so I cannot upgrade iPhoto past 8.1.2. Trying to create a slideshow and cannot move photos without iPhoto freezing up. Any suggestions?

10.6.8 can run up to 9.2.3
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Similar Messages

  • Just upgraded to OSx Maverics and Iphoto 9.5 - no music during slideshow ?

    Just upgraded to OSx Maverics and Iphoto 9.5 and now have no music when playing slideshows (using custom or default). All libraries worked fine before upgrade (using Lion). Any ideas?

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • When making a photo book, my iPhoto freezes during uploading the book to the store after assembly.  I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large images. How can I get past this?

    When making a photo book, my iPhoto freezes during uploading the book to the storey.  I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
    My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).

    Try Old Toad's solution here:   See   Re: iphoto : upload impossible to print a book
    Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
    Léonie

  • Can't save "Play music during slideshow" setting in iPhoto 6

    Hi,
    I just bought and installed iPhoto 6 today as an upgrade to iPhoto 4. I've discovered that I'm unable to save the "Play music during slideshow" setting in the dialog which appears when I click the "Play" button from the thumbnail screen to play a slideshow. If I uncheck this checkbox and then click on the "Save Settings" button, the next time I play a slideshow, the music starts up again. The most particularly annoying thing about this problem is that I'm trying to create a slideshow that plays no music, and I have to continually uncheck the "Play music during slideshow" checkbox each time I play the slideshow. Has anyone else run into this problem, and is there a solution or workaround for it?
    Thanks,
    Ken

    Hi,
    I think I've figured out what's going on here, but I don't know how to fix it. While I was playing around with the items in the "Play" dialog that appears when you initiate a slideshow, I discovered that if I uncheck the "Play music during slideshow" and then change the selection in the tree of folders underneath the checkbox, that the checkbox becomes selected. This would normally be the considerate thing to do, since if the user were making a selection in that tree, it would be rather "rude" in a software sense to not check the checkbox automatically. Unfortunately, in this case, the logic doesn't seem to be looking at the Preferences flag which (correctly, I think) is remembering that I don't want music to be played. So what I think is happening is when this dialog is first instantiated, the checkbox setting is remembered correctly. However, what happens next is that the saved selection in the folder tree is then restored, which then triggers the "a tree selection was just made, so let's check the checkbox" event. This is why if you've saved the "don't play music" setting, the checkbox is initially cleared, and then when the tree selection is set, the checkbox becomes checked. If I save the settings with the checkbox checked, the checkbox is set from the instant the dialog appears. So assuming that this is what's happening, is it possible to fix this by editing the NIB file using the Developer Tools? Or is this logic embedded in the compiled code?
    Any suggestions would be appreciated.
    Ken

  • Elements 10 project slideshow freezes during output

    Elements 10 project slideshow freezes during output.  When writing to CD it freezes about 70%.  When output to hard drive is selected, it freezes around 39%.  This is a show I have been working on for a few days.  It has been working but can no longer use the output feature.
    O/S:  Windows 7
    I downloaded the trial of Premiere and the show outputs without any problems.  I don't really want to buy another program.  Can anyone think of a solution?

    a lot of that didn’t apply and I’m not tech savvy enough to figure the rest out... but. I uninstalled elements and elements premier, I didn’t realize this allows you to de-activate as part of the uninstall process, in e9 I de-activated from the toolbar. I saved my projects folder from my catalog to a disk. When I re-installed everything and loaded my projects I was able to open my slide show. I also “refreshed” my Windows 8 because it was having problems as well.
      I attempted to save the slide show as WMV again and again if failed, halfway through playback it froze and kept flickering. This slide show is only 4 minutes long with around 30 photos. I had used a different transition between each photo, I changed all but 2 to fade, this time it worked perfectly. I’m strictly an amateur, learning as I go, I intend to watch tutorials and learn more, but does it say anywhere that using multiple transitions in a slideshow can result in problems? I can’t believe it is my PC, I am using a 2 month old Dell XPS 8500 Special Edition, i7 3rd gen., 32Gb memory, Bluray burner, Radeon 7870 graphics with Windows 8, every driver is up to date.
    Thanks for your assistance. Darryl

  • My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

    My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
    When this happens I need to close down the computer and restart.
    Any ideas ?
    I've got Mountain Lion running.
    I'm on a 13" white MacBook with 8GB RAM installed.
    I recently had a 1 TB hard disc installed at the Apple store.

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • How to prevent resizing photos during slideshow?

    Hello,
    I'd like to know if there is any possibility to see the photos in their exact size, when I run slideshow? I tried to switch on/of that "Scale photos to fill screen" option, but this just changes the rule which side of photo is resized to fill screen .
    I'd like to see small photos rather in their exact size during slideshow than resized to fit width or height of the screen. If it is not possible in iPhoto 06, can I manage it in iMovie? I've never used that app but I've heard something about slideshows and iMovie or iDvd..
    Thank for your answers
    Honza

    hope this one hasn't been answered millions of times already...It has.
    I'd like to prevent it altogether. Can this be done?Not really. You need to use the ComponentListener to handle the componenResized events. You can get multiple events by adding the following to you code. The problem is you get lots of flickering when you handle each event and resize the frame.
    Toolkit.getDefaultToolkit().setDynamicLayout(true);

  • IPhoto 4.0.3 Freeze with Music Playing

    I'm unable to play music with an iPhoto 4.0.3 album without having the screen freeze. Without music all plays normally, but not with music.

    Just confirming similar experience, after upgrading my parent's G3 iBook with Tiger (10.4, archive and install). They had experienced no problems prior to the upgrade. I could not upgrade them to iLife 2006 (because they are G3 limited). So iPhoto is from Tiger, and iPhoto is from prior installation.
    Slideshow experiments I tried this past weekend:
    0) Slideshow sans music : WORKS
    1) Slideshow with included sample music : WORKS
    --a) FYI, contained with iPhoto.app special directory
    --b) however, copying mp3 from iTunes library location to iPhoto sample music directory (using cp within Terminal) : FAILS (something strange with iTunes mp3s?)
    2) slideshow with music within iTunes Library yields spinning beach ball : FAILS
    --a) No music has originated from iTMS (therefore copy protection is not an issue)
    --b) Newly imported mp3 from CD with iTunes 6.03: FAILS as above, so its not "old or corrupted" mp3
    --c) copying "working" mp3 from sample music location (within iPhoto.app) to iTunes music library : FAILS, so possible problems accessing iTunes library/mp3?
    Oddly enough, previewing music from the iTunes library within iPhoto works, so it seems like only the slideshow mechanism of playing music from iTunes library is broken.
    Parents have left, so that is all I can add to this subject for the time being...
    I'm sure they would be interested in the fix, if someone finds one,
    John

  • Are Hyper-V 2012R2 checkpoints Application data consistent? How does it use now VSS during checkpoints creation?

    Are Hyper-V 2012R2 checkpoints Application data consistent? How does it now use VSS during checkpoints creation?
    I read the article http://www.aidanfinn.com/?p=15759 that now WS2012 R2 Hyper-V changed how it performs backups.
    That is unofficial info.  I can't find any info about that in msdn, but that is critical.That is about data integrity.
    Is this true?
    Does this mean that we may not use VSS in Hyper V server backup application any more? Will Hyper-V 2012R2 host (WM is running) when i am creating a checkpoint, 
    call VSS to only flush VSS Writers during this process for target child VM to make application data crash consistent state? And the volume shadow copy wn't be used? Only vhdx +avhdx witch will merged later, right?

    There are a couple levels to this.
    If VSS is there, VSS is used (just as before).  But there is a bit more happening around it than simply placing the VM in a saved state.
    However, if VSS is not there (in the VM) then the behavior is slightly different (this is really to support Linux VMs that don't support VSS) - and still achieve a good VM backup.
    In another blog post I see it described this way:
    Online backup for Linux VMs – even though there’s no VSS support in Linux, the Microsoft guys have managed to find a way to create consistent backups of running Linux VMs, by doing what’s essentially called a “filesystem freeze” by briefly stopping
    all disk I/O inside the VM until the host creates a VSS snapshot of the VM on the host (thus getting a file-consistent backup with zero downtime) – once the snapshot is done, disk I/O is resumed and then the actual file copy process starts
    Flemming shows the process here:
    http://flemmingriis.com/changes-in-hyper-v-backup-in-2012-r2/
    If you are calling VSS to perform a backup - nothing has changed.  The only thing that has changed is the 'how it happens' , not the 'what you get' and 'how you call it'
    This way if you call VSS to perform a backup - you get a good one, no matter the OS in the VM, nor its support for VSS.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • Iphoto will not upload / freezes have to force quit.

    Mac OSX version 10.6.8  iphoto will not upload photos. After iphoto is open , it freezes and I have to forcequit. Any one have a simple fix for this?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists.
    If iPhoto does not freeze when importing photos into the new, test library then your current library is the culprit. If that's the case if you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • User Exit/ Badi for Changing Quant parameters during TO Creation

    Hi Gurus,
    Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
    User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
    I will highly appreciate reply from Gurus.
    Regards,
    Gupta M

    Hi manish,
    Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
    Thanks,
    Shibashis

  • Imac freezes during start-up. Seems to be caused by Airport issue.

    My Imac freezes during startup. I have tried starting it in safe mode without any luck. After the initial start sequence when it gets to this point: Airport linkup en1, the computer starts writing the same line endlessly: com.apple.launch [1] (com.apple.mDNSRsponder [2710]): posix_spawnp (“/usr/sbin/mDNSResponder”,...): No such file or directory
    I am not a technician and new to Macs too. I have tried almost everything in the supportfile about freeze issues. I am not able to start the Mac in safe mode. I have repaired the disk. I have tried reinstalling the software, but this fails too.
    Did a couple of changes on the timecapsule before it happened (creating a network and new security settings and backup settings) and installed Photoshop Elements 9 and did a lot of file restructuring. Left the computer open and came back to a blue screen. Since then I have been unable to start.
    My macbook works fine with the changes. I am stuck - what to try now?
    I need my files and they are luckily on the timecapsule, but i am not able to open the imac-bundle file on the macbook, why?
    Thanks for helping.

    did a lot of file restructuring.
    In Finder>Go>enter /usr/sbin do you see mDNSResponder listed there?
    Try Repairing Permissions for the Volume in Disk Utility (Note: may take a long time in 10.5.8)

  • Zen Micro Freezes during play and sometimes won't turn on at

    I have been having some issues with my micro and wondered if anyone could help. I didn't drop it or do anything I can recall to cause these issues, it just seemed to start out of the blue. 2 things are happening. Sometimes it will freeze during play and "buzz" (it's really just transmitting a countinuous sound of a millisecond of what it was playing like if the guy was saying apple, and it freezes when he starts to say it it will sound like "aaaaaaaaaaaaaaaaaaaaaaaa" but in a completely illegible buzz way). Second, it will sometimes not turn on at all, no creative logo, no lights, no nothing. Once I take out the battery and replace it, it will always then start no problem. The battery does not seem to be loose at all as the above mentioned buzzin will not stop until I remove the battery, and as I have repeatedly removed the back of the micro during these buzz session?the battery remains firmly seated and the buzzing continues until I remove it. So far I have updated the firmware to 2.2.02 (which I believe reformatted) which didn't stop it from freezing up during play, and just now did a disk clean up (which I can't imagine will have any change?if a complete format didn't). I haven't had the start up problem since the firmware update, but I haven't turned it on and off that many times yet. Any ideas? Sorry to be so verbose but I wanted to explain as best as I could what's wrong, and what I've done so far.

    Remove SIM and miniSD card first. Try to boot.
    The try hooking it up to the PC again. And see if you might be able to redo the update process.
    You can also try a hard reset. As described in a different tread. (Or read below).
    Othervise, I afraid you will have to take it to a Service Center.
    -- Quote from djassa1 (Re: N80 won't start up!)--
    Just reset to factory default.
    You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
    -- End Quote --
    Best of luck!

  • Error message during cube creation

    Hi expert,
    System show the following error message during cube creation, please info how to solve this problem. Thanks.
    Define the characteristics of the validity table for non-cumulatives
    Message no. R7846
    Diagnosis
    The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
    Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
    Examples of such characteristics are:
    A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
    the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
    Procedure
    Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
    In the example above, the characteristics "plan/actual" and  "plant" must be selected.
    The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

    Hi,
    Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

  • Error during PO creation "Total BED % rate exceeds 100 % "

    Hi.
    Its concerned to Indian Excice.
    Error during the creation of PO is " Total BED % rate exceeds 100 % " ,
    ( Message no. 8I453).
    And you pls note in J1ID its 16% maintained for that perticular chapter id and its 100% for BED in tax code.
    Can you pls tell me the reason for this error.
    Regds

    Hi Santosh,
    362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
    And For BASB 605 is maintained in the field AltCBV.
    Can you Pls explain the significance of this alternative calculation type.
    Regds

Maybe you are looking for