IPhoto 8.1 Garmin Oregon 550t map display problem

I am trying to view photos captured by a Garmin Oregon 550t in iPhoto. The locations shown on the map are wrong.
Further investigation of the previously reported problem with iPhoto 8.1 displaying incorrect location information in the map display reveals that the EXIF information captured by the Oregon 550t is unusual in that it captures the longitude as a large number of seconds with 0 minutes. e.g. Longitude: W 105° 0' 810.000116 as reported by EXIF Viewer.
This unusual format seems to throw off iPhoto.
Aperture interprets the data correctly reporting Longitude 105º 13' 30.000" W.
Has anyone else seen this problem?

I user EXIF viewer http://homepage.mac.com/aozer/EV/
This photos works fine in iPhoto and with Preview
Using EXIF viewer the GPS section of a working photo looks like:
Latitude: N 29° 52' 10.86
Longitude: E 31° 13' 0.48
Altitude: 48.00 m
Time (UTC): 08:36:21
GPS Status: Measurement In Progress
Geodetic Survey Data: WGS-84
The same photo in Preview shows:
Altitude: 48 m (157.5 ft)
Altitude Reference: above sea level
GPS Version: 2.2
Latitude: 29° 52' 10.86" N
Longitude: 31° 13' 0.48" E
Map Datum: WGS-84
Speed: 0
Speed Reference: Kilometers per hour
Status: A
Time Stamp: 08:36:21.00
The info you showed is in a different format - my photos work fine with iPhoto
What version of iPhoto '09 do you have (8.1 is the latest) - some earlier versions had some issues with some types of GPS data - I've not seen any such issues since 8.0.3 (I think)
LN

Similar Messages

  • Can the iphone maps display more than one pin at the same time?

    For example, on a recent trip to New York I preloaded bookmarks of all the places I wanted to visit into the iPhone Maps. I then wanted to see where they all were in relation to one another so I could decide which one to go to next (MOMA, Guggenheim, Metroplitan Museum of Art for example). Is it possible to have the map display them all at the same time?

    DaVBMan wrote:
    Are you sure about that Andrew. I see no option to toggle on all my bookmarked pins. I can pick one to show and it shows up. But if I pick another, the previous one will go away. Only doing a search for stuff in an area will Google Maps show multiple pins, but I see no way of making all your saved bookmarks show up.
    Did it on mine just now but I also did a very small location here in Sacramento. Dropped a pin in 1 city, Bookmarked, Dropped a few others and bookmarked at least 6 cities in the general Sacramento area, zoomed out just a bit and saw 6 red Pins. Which are all bookmarked.
    If I could snap a photo of my screen I would post it.

  • No map display in Photoshop Elements 8.

    I have Photoshop Elements 8 and wanted to use Map Display for the first time. I opened the Display tab  and there was no Show Map Option. Calendar or Date View was there and other views but no Map View. What should I do to have a Map View?

    The mapping capabilities were provided by Yahoo! which discontinued its mapping service, so PSE now doesn't support locating on maps.
    Ken

  • I am trying to find a method to customise the pin icon on Web Apps map display

    Hi all,
    We are trying to find a method to customise the pin icon on Web Apps map display. This is the page that we are working with, it has 2 categories of locations.
    http://www.corporategames.net.au/aus/Sport/venue-map
    I want to be able to set the pin either at a web app item level or a category level.
    Any ideas?
    Thanks,
    Jude.

    There's really no simple answer to your problem but I think this link is a good place to start
    http://code.google.com/apis/ajax/playground/#custom_marker_image_v3
    Also, there are lots of examples of what you want here:
    https://developers.google.com/showcase/
    But how you apply this to your needs is likely something that's gonna keep you up through many nights and coffees!
    @webmospherehttp://www.webmosphere.co.uk/

  • Find My iPhone Map Display

    Within the past two weeks, the Find My iPhone map display has been divided into blocks separated by multiple grid lines.  This results in inaccurate locations for the device.  How do you resolve this issue?

    I've tried setting it to both; standard results in dots appearing over a blank background. Setting it to hybrid shows them on the satellite image, but with no street signs. Basically, for some reason, nothing from the map will display.

  • I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

    I have imported a jpeg photo into iPhoto  and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

    I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and  Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
    When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
    Regards,
    Theogt

  • Use a map display version low or not installed flash

    When using the map display version low or not installed flash,but have installed the latest version of IE

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • Display problem- Missing letters

    Hello there,
    I had a display problem with my 15" mac book pro. Sometimes the words on the menu bar will have missing letters. For example, F le Ed t Vi w and etc. This does not only happen in the main interface, it also occurs when I'm browsing websites (the contents have missing letters too)or open other applications(iphoto, imovie) The problem is getting worse these days, I 'll have to restart my computer every single time when it happens.
    Does anyone have any solution to this technical issue?
    Thank you very much,
    Lilly

    I tried IVMichael's suggestion above and had no joy, but when i restarted i found a file called /Users/your_name/Library/Preferences/com.apple.LaunchServicesQuartantined
    after deleting that and restarting i seem to have solved the problem.
    Good luck

  • Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

    Installing ios 8.2 does not resolve Google map navigation problem.

    I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
    Instance created.
    DIM-00019: create service error
    O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
    Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
    This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
    Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

  • Wierd lines on my display and frequent lock-ups w/ and w/o display problems

    When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
    When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
    Thank you in advance,
    Darren
    Interval Since Last Panic Report: 104960 sec
    Panics Since Last Report: 5
    Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
    Wed Nov 18 15:49:50 2009
    panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
    0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
    0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
    0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
    0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
    0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
    0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
    0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
    0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
    0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
    0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
    0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
    0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
    0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
    0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
    0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
    0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
    0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
    dependency: com.apple.NVDAResman(6.0.6)@0x96f000
    com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
    dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10C540
    Kernel version:
    Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    System uptime in nanoseconds: 3788331456483
    unloaded kexts:
    com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
    loaded kexts:
    org.virtualbox.kext.VBoxNetAdp 2.2.2
    org.virtualbox.kext.VBoxNetFlt 2.2.2
    org.virtualbox.kext.VBoxUSB 2.2.2
    org.virtualbox.kext.VBoxDrv 2.2.2
    com.bresink.driver.BRESINKx86Monitoring 5.0
    com.pctools.iantivirus.kfs 1.0.1
    com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
    com.apple.filesystems.ntfs 3.1
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.7.9a4
    com.apple.driver.AirPort.Atheros 412.19.4
    com.apple.kext.AppleSMCLMU 1.4.5d1
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.2
    com.apple.driver.AppleIntelMeromProfile 19
    com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
    com.apple.driver.AppleLPC 1.4.9
    com.apple.driver.AppleBacklight 170.0.14
    com.apple.driver.AppleUpstreamUserClient 3.1.0
    com.apple.GeForce 6.0.6
    com.apple.driver.AppleUSBTrackpad 1.8.0b4
    com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
    com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
    com.apple.iokit.SCSITaskUserClient 2.6.0
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.0
    com.apple.iokit.AppleYukon2 3.1.14b1
    com.apple.driver.AppleAHCIPort 2.0.1
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleIntelPIIXATA 2.5.0
    com.apple.driver.AppleUSBHub 3.8.4
    com.apple.driver.AppleFWOHCI 4.4.0
    com.apple.driver.AppleUSBEHCI 3.7.5
    com.apple.driver.AppleUSBUHCI 3.7.5
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3
    com.apple.driver.AppleHPET 1.4
    com.apple.driver.AppleACPIButtons 1.3
    com.apple.driver.AppleSMBIOS 1.4
    com.apple.driver.AppleACPIEC 1.3
    com.apple.driver.AppleAPIC 1.4
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
    com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
    com.apple.driver.DspFuncLib 1.7.9a4
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IO80211Family 310.6
    com.apple.iokit.IOSurface 73.0
    com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.2fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.7.9a4
    com.apple.iokit.IOHDAFamily 1.7.9a4
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.driver.IOPlatformPluginFamily 4.0.1d0
    com.apple.nvidia.nv50hal 6.0.6
    com.apple.NVDAResman 6.0.6
    com.apple.iokit.IONDRVSupport 2.0
    com.apple.iokit.IOGraphicsFamily 2.0
    com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
    com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
    com.apple.iokit.IOBluetoothFamily 2.2.4f3
    com.apple.iokit.IOUSBHIDDriver 3.8.4
    com.apple.driver.AppleUSBMergeNub 3.8.5
    com.apple.driver.AppleUSBComposite 3.7.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOATAPIProtocolTransport 2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
    com.apple.iokit.IOAHCIFamily 2.0.2
    com.apple.iokit.IOATAFamily 2.5.0
    com.apple.iokit.IOUSBUserClient 3.8.5
    com.apple.iokit.IOFireWireFamily 4.1.7
    com.apple.iokit.IOUSBFamily 3.8.5
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 281
    com.apple.iokit.IOStorageFamily 1.6
    com.apple.driver.AppleACPIPlatform 1.3
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
    Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: ST9320421ASG, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-857E
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
    Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

    S.U.
    Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
    Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
    Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
    Should make for good bedtime reading. Puts you right to sleep.
    c

  • Display Problem with RowHeader of a Scroll Pane

    Hi,
    I am trying to display row headers for a table using another table
    Here is the code
    import javax.swing.*;
    import javax.swing.table.*;
    public class RowNumberHeader extends JTable {
      protected JTable mainTable;
      public RowNumberHeader(JTable table) {
        super();
        mainTable = table;
        setModel(new RowNumberTableModel());
        setRowSelectionAllowed(false);
        JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
      public int getRowHeight(int row) {
        return mainTable.getRowHeight();
      class RowNumberTableModel extends AbstractTableModel {
        public int getRowCount() {
          return mainTable.getModel().getRowCount();
        public int getColumnCount() {
          return 1;
        public Object getValueAt(int row, int column) {
          return new Integer(row + 1);
    }and then
            JTable displayTable = new JTable(...);
            scrollPane = new JScrollPane(displayTable);
            JViewport jvp = new JViewport();
            jvp.setView(new RowNumberHeader(displayTable));
            scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
    A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
    Any ideas?
    Sylvain

    Again the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
    ie say I have table
    Row 1 - 1  2  3
    Row 2 - 2  4  5
    Row 3 - 5  7  7
    Row 4 - 5  6  7where Row X is the row header. So for example, if you click on Row 2, you will get something like
    Row 1 - 1  2  3
    Row 2 - 2  4  5
          - 5  7  7
    Row 4 - 5  6  7until the screen is refreshed or you click some other row header.
    hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
    Here is the code I added in the constructor:
            getSelectionModel().addListSelectionListener(new ListSelectionListener()
                public void valueChanged(ListSelectionEvent e)
                    System.out.println("Header table selection is: First = " + e.getFirstIndex() +
                                       " Last = " + e.getLastIndex());
                    RowNumberHeader.this.repaint();
            });

  • Macbook and HP 2510i monitor display problem - help

    Hello,
    I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
    - I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
    - I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
    - I unplugged monitor to cut electricity and tried.. nope not working
    - I did several tricks with macbook no effect
    - I reinstalled Mountain Lion .. no effect
    - I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
    Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
    Any help will be appreciated
    Thanks

    My graphic card details;
    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          GPU
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3462

  • My original post, locked by this forum. Display problem related

    Hi G5 Gurus,
    The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
    As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
    This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
    Please let me know if any of you had the same problem and please advise what to do.
    100s Gs of thanks.
    Songyan
    iMac G5 Mac OS X (10.4.8)
    la teller
    Posts: 1
    From: Los Angeles
    Registered: Jan 10, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
    I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
    imac G5 17 inch Mac OS X (10.3.9)
    Bad luck G5
    Posts: 8
    From: UK
    Registered: Jan 10, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 11, 2007 1:20 PM in response to: la teller
    Hi La teller,
    Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
    Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
    Thank you again and hope Apple can take our concerns into their consideration soon.
    Songyan
    iMac G5 Mac OS X (10.4.8)
    stopha6
    Posts: 1
    From: US
    Registered: Jan 12, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
    Hello,
    I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
    His suggestions were to:
    1. Run disk repair from the startup CD
    try running OS X from a firewire drive and see if the same behavior happens or
    perform and archive and install.
    When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
    iMac G5 Mac OS X (10.4.8)
    Bad luck G5
    Posts: 8
    From: UK
    Registered: Jan 10, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 14, 2007 12:52 PM in response to: stopha6
    Hi Stopha6,
    Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
    Please keep me updated with your progress.
    By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
    Thank you.
    Songyan
    iMac G5 Mac OS X (10.4.8)
    Bad luck G5
    Posts: 8
    From: UK
    Registered: Jan 10, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 15, 2007 6:58 AM in response to: stopha6
    Hi Stopha6,
    After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
    iMac G5 Mac OS X (10.4.8)
    AG-Nate
    Posts: 5
    From: Pismo Beach,CA
    Registered: Aug 26, 2006
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
    The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
    eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
    Bad luck G5
    Posts: 8
    From: UK
    Registered: Jan 10, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
    Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
    iMac G5 Mac OS X (10.4.8)
    Timothy Klein
    Posts: 15
    From: Denver, CO, USA
    Registered: Dec 6, 2004
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
    "The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
    That's only partly right. A hard-working process will make the fans run at high speed, of course.
    But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
    If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
    So it may not be so simple as a hard-working cpu process kicking the fans on.
    iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
    Kensall
    Posts: 2
    From: London, England
    Registered: Feb 2, 2007
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
    Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
    i mac G5 Mac OS X (10.4.8)
    a brody
    Posts: 15,170
    From: Silver Spring, Maryland. Don't forget to backup your data!
    Registered: Dec 23, 2000
    Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
    Posted: Feb 2, 2007 10:27 AM in response to: Kensall
    Kensall,
    Welcome to Apple Discussions!
    As in the other thread I wrote:
    Being from England, you may find the repair program under these pages:
    http://www.apple.com/uk/support/imac/repairextensionprogram/
    http://www.apple.com/uk/support/imac/powersupply/repairextension/
    Check both of them as they refer to different models.
    If neither of yours is under the program, please start a new topic thread so someone can help you.
    http://discussions.apple.com/forum.jspa?forumID=881
    First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
    iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

    I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
    It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
    Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
    Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
    Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
    iMac G5   Mac OS X (10.4.4)  

  • Why is netflix having display problems on my macbook pro... HDCP compliance?

    Watching Netflix and all of a sudden it says "Display Problems"  Make sure your monitor is HDCP Compliant and is not setup for mirror airplay??

    The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
    So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
    If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
    You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

  • Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

    After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display.  The image is displayed with a black bar on the right and on the bottom.  And the left side of the content is not visible.  I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct.  I held down the option key to try to detect displays or switch to resolutions that are not normally available.  When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart...  The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7.  The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion.  I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

    That card is for a PC it may not give you Startup and Option-Boot screens.
    The 7950 "Mac Edition" card has a very distinctive look:
    http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Maybe you are looking for

  • How to move ADF HumanTask (ADF Project) from One BPM Application to ANother

    Good DAy! Problem We've created huge Project on ADF with difficult form and now we have to create the same (95%) form in another BPM Application Is it possible to migrate ADF Project from one BPM Application to Another???

  • Where to upload Student Record INFO for discount?

    I just bought lightroom 5 but there is no where i can upload my student ID and records. Before purchasing lightroom 5, I called a rep and they said once i purchase Lightroom 5 i will be able to then upload my student records. I cant find where i can

  • Help with using IIS as webserver

    I have two DNS that maps to two application on the same instance of weblogic. I have to use IIS as my webserver, and so I have two IIS apps that maps by path. In one of the iisproxy.ini file - WlForwardPath = / and in the other WlForwardPath = /app2

  • Modest but important loss of photos

    After commiting the cardinal iPhoto sin of managing iPhoto functions in the Finder I found the suggestion here to create a new Library after saving the original and then importing files from old to new Libraries. After the import a window with many m

  • Office 2007 Ribbon Bar and Icons in LabVIEW

    Hi all, I've seen that with Visual Studio you can create applications which use the very nice Office 2007 Ribbon (menu) bar.  Microsoft has also made available the Office 2007 icons via an Excel spreadsheet. I would very much like to use a ribbon bar