IPhoto 9.4.2 does not show mp4 movies to import from SD Card

Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
What could be happening to my iPhoto?
Thanks in advance.

but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader?  Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
OT

Similar Messages

  • TS3276 Email does not show contents, only to and from.

    Email does not show contents, only to and from up top.  Just started doing this last week.  Already deleted account and added it again still same problem.

    Mac OS version?

  • HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

    Using osx mavericks on macbook pro.  My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

    What router? Have you restarted the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My settings "general". Does not show a"update software " choice from the menu?

    My settings "general". Does not show a"update software " choice from the menu?  I cannot find what iOS software I'm currently using or what iPad I have

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • MacBook Pro late 2013 does not show login window after waking from sleep

    MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
    This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
    Any ideas?
    Thanks
    marcus

    Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
    I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
    I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
    sudo pmset -a autopoweroff 0
    We'll see if it helps.
    It happens toughly a couple of times a week.

  • HT201272 i am trying to download facebook for iphone3gs, it seems that everytime i try to click the free button, it just goes blank green button, and would not continue downloading or does not show any movement

    i am trying to download facebook for iphone3gs, it seems that everytime i try to click the free button, it just goes blank green button, and would not continue downloading or does not show any movement

    Delete your old Firefox Profile and create new one
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    Backup and Restore your profile data's
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Profile_backup

  • Music will not show in library when imported from file

    To whom ever can assist me:
    Firstly, thanks for looking this over.
    I am attempting to import music files that I have already saved on my PC via Real Player (I saved the music from my music CDs, using Real Player as my default media player). These files are saved on my C: Drive, under "My Music", and saved in folders under each artist.
    Now, as I go into the iTunes icon, go into "File", and attempt to "Add file to Library", the songs are not being saved to my iTunes library. It allows me to find the song and double click on it, assuming I am opening it into the library, but it does not show.
    I have gone through a few forum questions to see if I could find the answer on my own, and understand that because my music is saved w/a Real Player icon, that I may have to convert it. But I am completely lost as to how to do this, and w/out having to resave the songs say, like on CD, then resaving on iTunes.
    Any suggestions?
    Thanks,
    Sweet_Li, NYC
    Dell   Windows XP  

    If you've saved the songs as Real Player format then unfortunately iTunes will not copy those songs into the library. Because the extension is ".rm" which iTunes doesn't recongize.
    If the songs are saved with a .mp3 file then they should copy just fine.
    Hope that helps a little.
    AL

  • I have just purchased a Nikon D7000 and iPhoto downloads jpgs but does not show them. It shows an empty frame. If you double click the frame it will show the image. I have tried importing images from the Nikon provided software and the same thing happens.

    I just purchased a Nikon D7000. However, iPhoto does not display JPEG images. I seems to download ok, but displays only an empty box. Double clicking on the box opens the image in a single display window. It does the same thing when importing from Nikon's supplied software. Forget about handling RAW files. Now, I'm having difficulty importing JPGs from Photoshop files for slide shows or use in iMovie.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • IW42 does not show goods movement at opearation level but at header level

    Hi Gurus,
    If you add the goods movement using IW41, it stores it correctly against the operationa and shows in GI mat doc and in doc flow under opearation but the same does not happen in IW42. is there a way to do this in IW42 so that GI mat doc shows up under opearation when we add the goods movemnt to IW42 (its an unplanned Goods movement )

    Look at the below thread.
    Goods movement in Confirmation IW42,
    In IW41, confirmation will be done at operation level, so that goods movement also will be done at operation level. But IW42, confirmation could have been done at order level. So goods movement will happen at order level. If you want at operation level in IW42, then in IW42 give order number & operation number (its almost doing same like IW41)

  • Lync 2013 does not show normalized numbers in the client contact card.

    Hi,
    We are migrating from OCS 2007 to Lync 2013. Everything runs now in side by side topology.
    I have problems with contacts numbers shown in the Lync client.
    I've moved "Company_Phone_Number_Normalization_Rules.txt" file from OCS server to Lync. All rules works fine there, after running update-csaddressbook , Invalid_AD_Phone_Numbers.txt file is empty (no errors).
    We are using this format in AD for users: (613) 123-4567 Xdddd
    Normalization rule is:
    (\s*)\(?\s*(613)\s*\)?[\s()\-\./]*(123)[\s()\-\./]*(4567)[,\s\w]*(\d\d\d\d)
    +$5
    So it will normalize phone (613) 123-4567 X5656 to +5656 (We need it this way because we are using phone control)
    Problem is that this normalized phone does not shown in Lync client, but it perfectly works in old OCS environment.
    Thank you!

    Hi,
    I've replaced my old rule with one that you wrote, and it works as it should (ABServer.exe -testphonenorm 
    recognize it in the right way). Thank you for this advice!
    Then I run update-csaddressbook, removed .db and .idx files from user, re-lunched Lync client..but this number still not shown.
    Here are results of  Get-CsAddressBookConfiguration
    Identity                   : Global
    RunTimeOfDay               : 1:30 AM
    KeepDuration               : 30
    SynchronizePollingInterval : 00:05:00
    MaxDeltaFileSizePercentage : 20
    UseNormalizationRules      : True
    IgnoreGenericRules         : False
    EnableFileGeneration       : True
    MaxFileShareThreadCount    : 300
    EnablePhotoSearch          : True
    It looks strange, number can be normalized, but it's not shown for the user.

  • Ever since aptv update my apple tv menu does not show apple movies or TV shows.  I am able to access my music, rental, etc on my computer iTunes.  any ideas what can done

    ever since updating my apple tv to the latest software, my on screen menu is missing all the apple shows and movie catagories plus netflix is gone from my internet menu. I have home sharing turned on and able to listen to music from my desktop also see any movies I rented from apple  on my desktop mac.  Any ideas what could be happening.

    Welcome to the Apple Community.
    Check your store location is still set correctly.

  • S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

    Hi Gurus,
    We do upgrade and do testing to all functional process realted.
    When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
    Any setting missed ? or any suggestion about this issue.
    Thx in advance.
    Tri Wicaksono

    Hi Tri,
    Check the following.
    I have checked your request, and there are two 'ways' the report
    will send out the data:
    1. In a 'normal' list
    If you call the report in the 'standard' way, the data get displayed
    in a normal list. This is the standard.
    2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
    With this flag, the reports output is done with the ALV Grid display.
    About this ACCESSIBILITY_MODE flag,  refer to the note 929036,
    which describes the 'function' of it.
    Regards,
    Fernando Evangelista

  • KM-Uploaded Package does not shows up in pending imports list

    Hi All,
    I have uploaded the package for KM transport and can see in server SYS\global\config\cm\expimp location.
    But the import is not listed in pending imports to further with the KM transport.
    SOme one please help quickly. I  need to send transport in production ASAP.
    Thanks and Regards,
    Nuzhat

    Hi,
    after you uploaded your KMC transport package it should appear in the pending imports list. If it's not there, make sure that you didn't change the file extension from KMC to ZIP. When you used IE to download the exported archive, changes are that IE changed the file extension to ZIP. Rename it to .kmc and upload it again.
    br,
    Tobias

  • MP3 files not showing in iTunes after importing from Windows PC

    I have my MP3 music files saved on my computer. For some reason when I try to import a particular folder to iTunes Library, only 3 of the 11 files in the folder show up. Why aren't the other 8 showing up? Can anybody help me with this?

    For one of the problem files, right-click it and choose Open With > iTunes.
    If the file is compatible, it will start playing and be added to the library.
    If iTunes "errors silently" (i.e. does nothing) it means the file is incompatible.  If you are sure it is a valid MP3, treat it with a 3rd party tag cleanup program such as Mp3Val.  That usually suffices to make iTunes happy.

  • How do I determine the size of an event (cmd I does not show any size for events).

    How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).

    If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window.  It will give you the number of photos and size:
    for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i.  The number of photos and size will be at the top of the Info drawer.
    OT

Maybe you are looking for

  • Window 8 is not recognizing my Ipod touch and I can no longer sync to I tunes

    I can not sync my Ipod to Itunes in Windows 8.  The device doesn't show in Itunes.

  • How to view JPEG in LR5

    I just loaded lr5 with the library on my HD, and all Raw and JPEG images show nicely in the library pane, but no JPEG image will open in the develop module.  The notice "THIS FOLDER COULD NOT BE FOUND" is displayed. (and yes, i checked the box in gen

  • Downloading trauma

    Unable to download Itunes - get the message 'unknown publisher' followed by the following error message - 'C:\documents & settings\owner\local settings\temporary internetfiles\content IES\1LKLCFM9\itunes set up (1).exe is not a valid win 32 applicati

  • Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

    Topic title pretty well sums up the question. I have a TimeCapsule Base Station with two Expresses for extending the network through the house. We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in t

  • Reporting agent problem - need help

    Hi Gurus, I have schedule a job everyday for reporting agent. Which includes 6 reports init with precalculated webtemplate. The reason to use this is that everyday morning the job will run before users use those reports and it will add that in cache