Iphoto 9.4.3 does not open after security update. osx 10.7.5 Lion is running

Last used iphoto  a month ago to upload photos. Today attempted to upload daughter's gymnastic photos and iphoto 9.4.3 will not open. Stops at dialog that says it must be updated to open my library. But I run Lion not Maverick. The new iphoto only runs on Maverick. Only system change I can think of since end january is the security update I did a few days ago. I've checked the iphoto library and it seems intact with 43 gigs of photo etc stored over last 10 years.
MacApp says new update available 9.5, but it doesn't work with my Lion. I don't want to change anything right now.
Computer is MacPro G5 2009.

OK - good luck
Generally it is better to resolve problems and then upgrade since generally problems have nothing to do with the Application but are data problems which can be made more difficult to resolve by upgrading the software while the problem still exists
LN

Similar Messages

  • HT1338 Mail does not open after software update?

    My MacBook just updated with OSX 10.6.8 buildK549.  Now my Mail does not open. I get a message that the mail version 4.5  1084/1065 is not compatible with the OSX.  There was a new mail icon in the apps file but it did not open. Any suggestions?
    How do I reinsatll Mail?
    Thanks

    It's giving you that message because the update changed Mail from version 4.5 to 4.6 and it's seeing the 4.5. The part of the update that was meant for Mail failed because it couldn't find Mail where it was looking for it.
    See
    https://discussions.apple.com/thread/4311280?tstart=0

  • Itunes does not open after an update

    I was prompted by itunes for an update and i did. Now Itunes does not open. it say "itunes library itl file cannot be found or created. The default location for this file is in the itunes folder in the Music folder. Has anyone else encounter this problem. thanks

    Worked for me. Could not uninstall Apple Mobile Device but continued in this order. Rebooted and reinstalled iTunes.
    All of my Library was restored.
    Running Vista Ultimate.

  • Outlook 2013 does not open after Windows / updates

    Hi,
    I had installed Office 2013 on my Windows PC. I got updates for Office 2013 and after that my Outlook stoped working. It did not open except in safe mode. I checked similar problems and tried to remove add ins in safe mode but still does not work. Tried
    to create new profile no success. Then I tried to re install it yesterday and it worked fine until I got updates again today and it stops open again.
    Is something wrong with Office 2013 updates?
    Any suggestion/solutions to fix this problem.
    Chagi

    Hi,
    Since Outlook works fine in safe mode, you can also try to open Outlook with
    /safe:1 and /safe:3 commands to narrow down the cause.
    /safe:1  Starts Outlook with the Reading Pane off.
    /safe:3  Both native and managed Component Object Model (COM) add-ins are turned off.
    Please also try to open Outlook with /resetnavpane command to check if this issue is caused by corrupted Navigation Pane settings. To do this, press Windows key + R to open the Run command, type
    outlook.exe /resetnavpane and press Enter.
    If above not working, please try to use the Inbox Repair Tool to scan and repair your Outlook data file errors to check the result. See:
    http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
    In addition, you can try to uninstall these updates to check if Outlook will work, so that we can determine if this issue is caused by released updates.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • MAIL DOES NOT OPEN AFTER SOFTWARE UPDATE

    Computer - software updates are available - clicked ok
    Computer - restart  - said yes
    Mail now has ffg msg - YOU CANT USE THIS VERSION OF MAIL WITH THIS VERSION OF MAC OS X
    You tried to open Mail version 4.5 (1084/1085) in
    It can’t be used on this version of Mac OS X. Try opening the version of Mail located in the Applications folder on your computer. For more information, click the Help button.
    HAVE MAC  VERSION 10.6.8

    I was posting a different work-around until Apple came out with the official article:
    Open a Finder window and "Find" like the screenshot: By filename for Mail.app
    Track down and discard any old versions of Mail you find. They don't work anyway.
    Then do these two steps:
    * Run the Mac OS X 10.6.8 Update Combo 1.1.http://support.apple.com/kb/DL1399
    * Run the Security update.http://support.apple.com/kb/DL1586
    --identified by Barney15E and Jreporter

  • Mac Pro does not start after security update

    Just updated my MBP (mid2011, OX ML)  with the latest Security Update ; after reboot it does not start. I get the start screen with login and it keeps spinning? Any wisdom here? thx

    Hi, Matholy.  
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Cheers,
    Jason H.

  • Cbc.ca comments section does not open after last update on mac

    The above website has a comments section into which one can login to.
    After the last update this part of that page is not appearing.
    I have checked everything I can think of including shutting off my firewall etc.
    I get it as normal on Safari as I did on Firefox before the update.
    I am running OS10.7.5 on a MacBook Pro

    The comments display fine on my system.
    Can you post what you see starting at the same spot?
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Why Netflix does not open after the new 7.0 update?

    WHY  Netflix does not open after the new update 7.9?

    Vincent149 wrote:
    I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
    These are user to user forums.  You are not addressing Apple by posting here.  If some other person has a solutoin for you, then they will post it.

  • My ipod touch 4 camera icon has disappeared and even does not open in any applications.. have restored it and its running on 4.3.5 not jailbroken pls help??

    my ipod touch 4 camera icon has disappeared and even does not open in any applications.. have restored it and its running on 4.3.5 not jailbroken pls help??
    it does not even appear in the search bar

    Is the Camera turned on in Restrictions?  Go to Settings>General>Restrictions.

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Aperture crashed and will not open after last update.  Anyone else have this problem?

    Aperture crashed and will not open after last update.  Anyone else have this problem?

    Yes.  See this very forum for 50 threads on it, that explain the solution.

  • Mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)

    I'm trying to figure out how to fix this.
    I rebooted into a techtool pro e-drive and repaired permissions (as well as some other repairs to the drive, etc), but it still is crashing.
    I created a new user and opened mail just fine there.
    So... it is something in my account. Not sure exactly what to do next?

    I'm having the same exact problem. (See Mail 2.0.5 crashes when I get new mail). I deleted my preferences & my junk mail settings, to no avail.
    A remarkable number of other people are posting with similar problems, just in the past week or so alone, and as far as I can tell, no one has figured it out. There is definitely a bug here. I have a hunch that it may be related to a recent software update. I'm going to post this to the other threads in hopes of garnering some attention from Apple.
    For posterity's sake, I am connecting to a Gmail account, a POP account, and a .Mac account.
    See also:
    Mail keeps crashing
    mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)
    Mail crashes immediately after opening--why?
    Mail Crashes CONSTANTLY!
    Mail quits when launching
    Mail crashes at open
    Mail crashes when downloading new mail.

  • Usb hard drive not loading after security update

    usb hard drive not loading after security update
    I can't seem to find any other posts about this problem.
    I have three external hard rives connect by a USB hub to my iMac.
    Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly. 
    I get the same issue but not all the time if I turn them on before I boot the iMac.
    I used the disk drive utility to "repair" the drives but they always come back as "probably ok". 
    If I restart the iMac with the drives connected (on), it seems to work but not all the time.
    A bit annoying as I am wondering if the drives are OK or not.
    I don't always need the drives as they are for backing up images from my camera using Apreture.
    This all began after i did the latest security update.
    is the update to blame?
    mahalo.

    Yes, you can still use those instructions to reset the PRAM.
    You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
    Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

  • Mail does not open after IPhoto compose.

    I want to email photos from IPhoto 7.1.3
    I hit the email button, make the appropiate choices, hit the compose button.
    The application prepares the photos for email and then... nothing.
    The mail application (3.2) does not open on a new message page with photos attached.
    Does anyone have any suggestions?

    Welcome to the Apple Discussions. If resetting the email preferences to Mail try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Launch iPhoto and try again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • IPhoto on my MacBookPro does not open - shows a box "Aperture library needs to be upgraded". I do not have Aperture installed and I am not interested to do so.

    On my MacBookPro - After updating iPhoto 11 to version 9.3.1, it does not open and shows a box "Aperture library needs to be upgraded" with choices to update or Quit. If I quit it closes iPhoto - if I try to update it goes to the App Store and requires a purchase of Aperture - I do not want to purchase Aperture.

    If you tried the First Aid Tools without success, make a backup of the iPhoto Library and rebuild with iPhoto Library Manager as described by Terence Devlin:
    uprgraded to yosemite all good but iphoto crashes every time I attempt to upgrade the photo library
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Download iPhoto Library Manager here:  http://www.fatcatsoftware.com/iplm/

Maybe you are looking for

  • Find and Replace HS5.5

    How do I include a line feed in the replace section of the find and replace feature of Homesite 5.5? Converting many lengthy files from <pre> and <tt> formats into CSS. Presently the target pages have paragraphs broken into short lines of text with C

  • Installation of Adobe Acrobat X Professional terminates

    I currently have Adobe Acrobat X Standard on my Windows 7 laptop.  I am trying to install Acrobat X Professional but keep getting the error message that I already have a more functional product installed and the installation process terminates.  How

  • Imported Archives - Do I need an XLST code?

    Not sure if I understand the significance of XLST code. I have my jar and class file ready to be zipped and imported. Can one you explain if I need an XLST and how do I go about creating one. Any sample? help?, etc Thank you, Parimala

  • Can responses be saved even if the user abandons the form?

    Can responses be saved even if the user does not click submit and abandons the form? SurveyMonkey does this and it is very useful, especially for longer surveys, where users might abandon the survey without completing it. SurveyMonkey seems to do it

  • JSP/Servlets on ColdFusion MX 7

    I have a customer that needs to run a JSP/Servlet forum software. I dont want to have to build a server using Apache Tomcat when I have a perfectly good Windows server running ColdFusion MX 7. Just one more headache to worry about. Currently, I have