IPhoto 9.5 - Cannot create a book anymore, causes iPhoto to freeze have to force quit

Ive had my new imac 5 days been creating a book all week, Was asked to create a new one for a family member but could not create a new book i can create a card or calender just not a book.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iPhoto
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved. If possible, restore it from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • Iphoto will not upload / freezes have to force quit.

    Mac OSX version 10.6.8  iphoto will not upload photos. After iphoto is open , it freezes and I have to forcequit. Any one have a simple fix for this?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists.
    If iPhoto does not freeze when importing photos into the new, test library then your current library is the culprit. If that's the case if you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Cannot Create a new ToDo...iCal freezes, and Calendars do not appear anymor

    Hi. In iCal, I have recently tried to create a new ToDo, and when I do, iCal freezes, I have to ForceQuit iCal, and the next time I open iCal, my calendars no longer appear in the left as they normally do. Someone suggested deleting the file for iCal in ~/Library/Preferences. I did that, and it fixes the calendars, meaning they do reappear, but I cannot create a ToDo anymore.
    Please Help!

    I've had a similar thing happen. When MoblieMe first opened, I chose to sync my iCal from my MacPro and my Macbook Pro and after that, all my calendars were blank in the left side window. If I tried to add a new calendar, the scroll bar showed that another one was added but the window was still blank. There were no events listed in the calendar window itself either but if I clicked on the "search" button at the bottom of the window, all the events that had previously been there were listed. If I clicked on one of those events, it would show up on the calendar in the color of the appropriate calendar it had been placed in. But the "list" window on the left was still blank. And I can't add any more events. I've tried all the fixes I've found by searching this forum and none have worked. I'm still looking for a solution. I"m on Tiger , still, so the combo update listed above won't work for me.

  • In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

    In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

    The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
    But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
    What theme and book size are you using?
    Regards
    Léonie

  • I cannot create a book

    How come my iphoto is unable to create a book? I have the following message: NSPlaceholderMutableString initwithString}: nil argument.
    Thank you for your help!
    Philipp

    Click here and follow the instructions.
    (26767)

  • HT4059 I cannot view my books on my iPad that I have selected, I see them there in iBooks -- tried the cloud said downloaded.  No book

    I cannot view my books on my iPad that I have selected, I see them there in iBooks -- tried the cloud said downloaded.  No book

    She must have signed into her own Apple ID on your iPad in order to sync her content from iTunes so try this and see if it works.
    Settings>Store>Apple ID. See if your ID is showing in there and if it isn't - tap on her ID, sign out and then sign in with yours.
    You should not be syncing to to different iTunes libraries. The iPad can only sync with one iTunes library without erasing the the content on it if you decide to sync to another iTunes library.

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

    My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
    The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

    You need to force quit all other (real or fake) instances of the Application Manager.  Instructions differ between Mac or Win.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

    Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

    Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
    Mylenium

  • I have Cs2 andOffice for Mac 2004 installed on an Os 10.6.3 system. This weekend my computer did an auto pdate to Os 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit.

    I had Cs2 and Office for Mac 2004 installed on an OS 10.6.3 system. Worked fine. This weekend my computer did an auto update to OS 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit. Any advise. System or Software problem?

    Bad timing.  Reapply the security update:
    http://support.apple.com/kb/DL1489
    What happened is that version 1.0 of the security update was available for a bit of time this weekend, and that disabled Rosetta.  Version 1.1 brought it back.

  • I am in Aperture 3, editing from raw, getting bouncing ball every few edits.  i created a new aperture library to see if this would help.  it does not.  i have to force quit to keep working.   I  shoot alot as my work.. this is making the process take lon

    I am in Aperture 3, editing from RAW, i get a beachball every 5 or so edits, so have to force quit to keep working.
    I created a new aperture library to see if that would remedy the situation.. it does not.
    Very time consuming..  can anyone help?  ami doing something wrong?  looked for software updates on my computer and did not fine any for aperture. 
    any ideas?   Thank you

    How much RAM, how full is the hard drive, and what computer? 8 GB RAM is recommended, and I also recommend that you do not upgrade to OS 10.7 Lion at this time.
    HTH
    -Allen

  • Why does my iPhoto seem to get "stuck" a lot of times to the point where I have to force quit it and how do I fix it?

    Why does my iphoto seem to get "stuck" a lot of the times when I try to exit it to the point where I have to "force quit" it and how do I fix the problem that causes it?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    does this only happen when you try to quit iPhoto?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    Happy Holidays

  • I was recently prompted to update iPhoto and make changes to the library.  I did it but it keeps hanging up in step 5 or 6 and won't complete the cycle.  I have used force quit, rebooted and started again several times.  How do i get this to work?

    I was recently prompted to update iPhoto and make changes to the library.  I did it but it keeps hanging up in step 5 or 6 and won't complete the cycle.  I have used force quit, rebooted and started again several times.  How do i get this to work?

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    If that fails:
    Restore from your back up, repair the Library and try again.

  • I converted an album to a slideshow: I exported it, selecting itunes as an export option.  A window comes up that says iphoto at the top, but nothing happens.  Also, this window will not close with the red button - I have to "force quit" and reopen iphoto

    I can't seem to export a slideshow from iPhoto.  I go through the export routine, but an iPhoto page comes up with other slideshows I've sent to iTunes, but nothing happens.  I've waited, hoping something was happening, but nothing does.  Further, once this page is up, you can't click out of it with the red button - to get it off the screen, I have to "force quit".

    With Firefox 23 and TabMixPlus 0.4.1.0 installed, an additional box is added to the Tabs options panel that allows 3 options for the tab bar:
    *One is to '''Always''' hide the tab bar. I do not know whether future versions of TabMixPlus will remove that option. I have tested in Firefox 23 and it is possible to completely hide the tab bar regardless of the number of tabs open.
    Other options added in the additional box with TabMixPlus 0.4.1.0 are:
    *Never
    *When I have only one tab

  • When I try to record narration in keynote on my imac I cannot escape out of this screen.  I have to force quit out of keynote.  This makes it impossible for me to use.

    When I try to record narration in keynote on my imac I cannot escape out of this screen.  I have to force quit out of keynote.  This makes it impossible for me to use.

    Click the record button to stop recording.

Maybe you are looking for

  • Premiere Elements 12 Incompatible Display Driver problem

    I recently bought Adobe Premiere Elements 12 and installed it with no problem. I tried to run it but it keeps saying that my display drivers are incompatible. My AMD Radeon 6950 has up to date drivers and I even tried deleting the BadDriver.txt, but

  • Error RE: add method in GUI application

    I'm trying to put three circles (red, yellow, green) in a sub panel called "trafficLight." Unfortunately, I keep getting the following error message that prevents me from compiling the program: *.\TrafficPanel.java:36: cannot find symbol* symbol  : m

  • My ipod is disabled and says connect to itunes i dont want to reset my ipod how do i unlock my ipod with out resetting my ipod

    Last saterday i accidently left my ipod in my church my paster was messing with it trying to unlock it to get my screen fixed for me and disabled it  i need help please??!??

  • FCP to iDVD

    I finally exported a nice looking video and when I put it into iDVD, it smashed everything down and the quality *****. I need help exporting in the correct format and making it look good in iDVD. The video is only 2.5 minutes long and is comprised of

  • Manuals of Oracle BPM 11g

    Guys: I would like know if you have manuals of Oracle BPM 11g. I hope you can give me some pages and pdf. Thanks a lot PS:If you have manuals in spanish, it will be great!!!.