IPhoto 9.5 sharpening drastically affects red channel

I have the weirdest bug: opening a photo into the "edit" window recalculates the edits and ties the "sharpening slider" to the photo's "red channel." There are no visible slider changes, but a beautifully edited photo is suddenly converted to peaked reds. This renders the sharpening slider and the editing panel more than useless – they damage the photo. I don't even have to enter the adjustement pane for the change to occur. Command + E is sufficient to recalculate, bringing my work to a standstill.
Everything since the last update has been working properly, at least until the latest "Digital Camera Raw Compatibility Update 5.01." I use a Sony NEX but only save JPEG and never RAW. The Sony Alpha NEX-5T is included in the update, but I'm shooting with a Sony NEX-5, which is an earlier generation model.
I've also confirmed the "sharpening/red channel" bug is present in Aperture v3.5 – RAW 5.01 – Build 718.1, and RAW Support 5010 – Build 91.8.
Is there a way to revert to the previous RAW build? Is there a patch? Am I just forced to wait on Apple?

Another example:
My original edit (sadly the thumb is all that's left, but you can see the color):
The initial red profile error, initiated upon viewing:
Current incorrect profile translation in the edit pane (you can see from the edits this is incorrect):

Similar Messages

  • Major differences between ACR and Aperture in red channel

    Hi!
    I did some printing a couple of days ago and the result was really not acceptable. At first we thought it was the printer and then the process of saving the files from tiff mac to tiff pc. After that we hade a look at the channels and the findings explained exactly why we got the result. After that I decided to compare ACR with Aperture and here are the differences in the Red channel. Camera is Canon EOS 350D, ISO 200. The image is 25% zoom. I don't know if it is possible to post images but a link is perhaps good enough.
    http://www.d.kth.se/~vendelin/ap-acr.jpg
    Do you have any ideas why Aperture gives me this result? If this is what I can expect from Aperture I'm afraid I'll have to use another raw converter for printing and that is a shame. The Image look fine in RGB but Red is destroyed and the printer in this case uses the red channel I'm told.
    kind regards,
    Edvard

    Obviously that would be one way of doing it but
    digging after every file in the aperture lib, opening
    them in ACR, saving as tiff 16, importing to aperture
    is a to painful process.
    If you have to do it for every image it would be annoying, but if you don't often have blown out color channels it would not be too bad...
    I actually use Aperture myself by importing TIFFs because my camera is not supported in Aperture directly.
    As you pointed out the dark
    area is in fact not dark grey but black. No
    information there what so ever. Is this a common
    problem with aperture? Has anyone else experienced
    this or is this image an extreme example?
    I'm not sure why that would be, that's a different issue. I have not seen anything like that as Aperture seems to recover as much detail as any other converter.
    Are you sure there is no detail there, if you raise exposure some? ACR is set by default to automatically change adjustments, you may want to try auto-level or something like it.
    <...>
    Is this really a problem with Core Images or is it an
    Aperture problem? Correct me if I'm wrong but
    aperture uses the same RAW converter as iPhoto does,
    in other words Core Images framework? I see why Apple
    want Aperture, iPhoto and other to use their raw
    converter that's built into the operating system but
    when the performance is lacking perhaps the Aperture
    team should consider to build one for them selves?
    <..>
    You are thinking about it backwards. What Apple is doing is to spend resources producing a pro level converter, which then every part of the system (including iPhoto) can use. If Aperture were going to build thier own RAW processor then why would you not want iPhoto to be able to use it as well?
    And in fact that's pretty much what happened, before Aperture came out OS X RAW conversion was pretty mediocre. But after Aperture Apple spent a lot of resources improving RAW conversion and it's far better now - whcih also benefits iPhoto.
    Is there any form of modified RAW converter for OS X
    I could use to replace the one shipping default? I
    would do anything in order to keep using aperture for
    prints also.
    Sorry, there's no way to swap out the OS decoder.

  • Red channel seems very low resolution

    Iwth a HVX200 and P2 workflow, I have noticed in the past that in Final Cut the images look good, but if you export them, the red channel can have artifacts, it looks like a 1/8th of the resolution. This could do with the channel smoothing.. I dunno.
    However, I had a work around (a bit of a chicken dance: opening the original files in quicktime, unchecking then rechecking the 'hi-quality' mode, then saving them as uncompressed.. THEN outputting them as frames.)
    However, with all the newest updates to the P2 importer, I am now noticing that the problem has creeped into Final Cut itself, and there is no way to work around it.
    I have older footage that looks great, if I now go and re-shoot, it looks bad, really bad.
    What is going on ?
    Has anyone else had this problem.
    I work in a large facility, and we do a lot of greenscreen and this is a real problem.
    thanks in advance,
    cris blyth

    like this?
    (200% zoom)
    The little red blocks around the arms.It has something to do with over saturation of the red channel causing problems with color sampling and compression. Fortunately, it goes away once it hits a TV monitor. I'm a little bit confused as well, but I do know what your talking about.

  • How do I crop without aperture re-enlarging the photo? Can I maintain size of crop without drastically affecting size of mega pixel output for online data transfer to print site?

    HOW DO I CROP WITHOUT APERTURE RE-SIZING THE PHOTO? CAN I MAINTAIN THE SELECTED CROP SIZE (VERY SLIGHT EDGE TRIM) WITHOUT
    DRASTICALLY AFFECTING THE MEGAPIXEL SIZE BEING SENT TO ONLINE PRINTING SITE?

    Note the "Size" read out on the crop popup this tells you the size your cropped image wil be. eg. The image here is a 21 megapixel image, cropping the image like so reduces the file size to 5MP, your exported file size can only be a max of this 5MP.
    Hope this Helps, (HTH)
    Tony

  • In iphoto 6.06 I make the red  eye changes, it appears to have worked, but when I open the pic again the red eye is back. Advice?

    In iphoto 6.06 I make the red  eye changes, it appears to have worked, but when I open the pic again the red eye is back.Advice?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • 2 layers of Video, one showing just Red Channel

    Hi All
    I've got 2 layers of video. From one layer, I'd like to use just the Red Channel. On the layer below, I'd like to use just the G-B channels. The result being a composite of both layers.
    I thought I'd be able to use the Arithmetic control to knock out the channels and use ADD as the operator for the top later but it doesn't seem to be doing anything - I still see the RGB image on the top layer despite the values changed by Arithmetic.
    What am I missing?
    Cheers

     good , glad my tip have been helpful.
    Often obvious things are forgotten in the heat of the moment  

  • Aperture video missing red channel on playback

    Aperture video missing red channel on playback.  Also some pictures appear to have missing pixels.
    Video played with Quicktime doesnt have the missing red channel.
    When trying to playback video,in aperture, it plays with missing frames, missing pixels and the crashes entire computer. My computer is a Mac Pro desktop with 24 gb memory with 3.33 ghz 6-core processor running Version 10.9.2 and Aperture 3.5.1
    Any suggestions on my problem?
    thanks
    Pat

    Never had anything before crash the whole system since OS8 or so.
    Back up your system, without deleting older backups - just in case; that looks like a possible system trouble.
    Also they some have been in Aperture for a while and they used to be OK.
    Do the videos play in QuickTime Player or any other software, if you export or reveal the originals?
    Can you play your videos, when signed into another user account?

  • Flash CC Color Picker defaults to Red Channel every time opened

    I recently upgraded to Flash CC, and am having an issue when opening the Color Picker to adjust a palette color.
    When the Color Picker opens, the Hue radio button is selected (H), but the visual palette selection on the left is showing the color spectrum as if the Red Channel (R) was selected.  I have to click on the "H" radio button every time the Color Picker is opened to refresh that selectable area on the left to show the correct information instead of the Red spectrum.
    In previous versions (ie Flash Pro CS5) it would remember which palette system you use (Hue, Saturation, etc.) and always use that when you re-opened the color picker.  Now this is forcing me to reselect my preferred palette every time I open the color picker.  This is not just happening when I restart Flash -- this is every single time the picker is opened, within the same session, within the same document, seconds apart.
    All of the computers in the office with CC licenses are also seeing this behavior.  Is this happening for everyone, and is there a solution to have it correctly show the palette system I've selected?
    I'm using Flash CC on Windows 8.1.

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Red channel quirk

    The backstory is that I had a power supply problem to a MBP as I was working on images in Aperture with an external hard drive. Apparently, the power supply to the external hard drive caused an import problem with some images; Aperture crashed; etc. I received new power supplies, did all three levels of repair (Command Option and launch Aperture), removed the dodgy import images and re-imported the files.
    The problem is that now these images 'drop' the red channel when in full screen mode and then that reprocesses the preview without the red channel as well. The image info is there; you can see it in the curves, adjust the curves by the usual methods, etc., but the images display without red. It is really peculiar and must be a problem with Aperture 3 reading and processing the channel for display. I did a test printout into a PDF file and the problem shows up in the output as well.
    Not good!

    Problem solved...sort of.
    When I imported these images, the adjustment window claims that the shots were imported with an older version of the RAW decoder. That's wrong; these are fresh images newly imported into Aperture 3. Anyway, for a few images, I did an individual 'reprocess' command in the adjustment window. Usually, that did not seem to do anything and the warning remained.
    Just this afternoon, I updated to A3.0.1 and the Pro kit and re-started Aperture. The warning was there, however I did a reprocess Raw command on the selected images and that got me back to 'normal'. Very, very odd.

  • Blue hue in screen (no red channel)

    I recently aquited a Powerbook G3 500(pismo). The screen has a blue tint in it, as if te red channel is not working. Yesterday I restarted the machine and there was some red showing, but not at very good quality.
    I am guessing it is the video card.
    Any help? Thanks.
    Joe
    Powerbook G3 500   Mac OS X (10.4.1)  

    Joe,
    The pinkish/reddish color is usually caused by a failing fluorescent backlight. But also in the equation is the inverter that powers the backlight and I believe it will just cause a dim display. However, if the display is new, then the inverter may be the problem.
    The inverter converts low-voltage DC to high-voltage AC to power the fluorescent backlight. These inverters are inexpensive and easy to replace. If your previous display appeared to have normal brightness, then the backlight is probably at fault.
    It sounds as though you bought a used display. This problem usually begins to manifest itself with a pinkish/reddish cast in the lower left corner of the LCD and which disappears as the display warms up. However, over time it will progressively get worse and you will eventually end up with a display that remains totally pink and quite unattractive.
    If interested, this is how you replace the inverter:
    You should be able to lift out the clutch cover after removing the keyboard and heat shield. Here is a picture of the inverter:
    http://www.ifixit.com/Guide/Mac/PowerBook-G3-Pismo/Inverter-Page-10-Inverter
    IFixIt also sells used parts including the inverter. There was a good article regarding the Pismo display but I have been unable to access it:
    http://www.macopinion.com/columns/roadwarrior/04/10/19/
    Sorry I cannot be definitive as to whether you have an inverter or bulb problem.

  • Cmd+1 selects red channel

    cmd+1 used to view actual pixels but now it selects the red channel. That used to be alt+cmd+3. In channels panel red channel select is shown as cmd+1. Wouldn't like to trash all the settings, so how to set only the keyboard shortcuts to default?
    thanks
    -matti

    found it, never changed anything in keyboard shortcuts, but use legacy channel shortcuts was checked, Unchecking it cmd+1 views actual pixels again.

  • How can I get all options under edit in iPhoto to appear and revert in red, the only option it gives me is to select multiple

    how can I get all options under edit in iPhoto on my phone to appear it has revert in red on theleft side & done on the right side, the only choice it gives me is select multiple

    The usual cause of that issue is a corrupted or missing font that Firefox replaces by another, in this case a bold, font.
    As a test you can try to disable the default font and choose a few different fonts (Arial, Verdana, Tahoma, Times New Roman) to see if you can identify the culprit.<br />
    you will have to reinstall that corrupted font.

  • IPhoto closes when I press the red X.......

    When using iPhoto, if I click the red X it actually closes. The little indicator dot under the icon in my dock goes away. I thought you have to click "command + Q" to close programs? What gives? All of my other programs stay open if I hit the red X. Is this something that got screwed up with 10.5.5 or ????
    Thanks,
    Steve

    iPhoto only uses one window in normal usage, and if you close that window, it assumes you want to quit the whole program. Some other applications, such as System Preferences, work the same way.
    (37699)

  • Export iPHOTO slideshow with ken Burns affects

    Is there any way to create a slideshow in iPhoto with Ken Burns affects default dissolve between slides and then export it into FCX?

    the audio associated with that set of photos was a piece of music off of an audio CD that had been transferred to iTunes for the purpose of making this section in the DVD. It's not a big problem that the music didn't transfer, since I can add it back into FCX. Thank you so much for your concern and help. This was a very key bit of info that you provided me. Thanks again. bill

  • Will the sharpen effect affect 32-bit colors?

    It seems the Sharpen effect in Premiere Pro CC is not 32-bit, however based on this http://forums.adobe.com/thread/1012268 , it should not affect the colors. Can we get a confirmation that indeed applying this effect on a 4:2:2 10bit ProRes project will not crush the bit-depth of the colors?

    The theory is sound, but we'd probably have to get an Adobe engineer to chime in to know for certain, and that's a pretty rare occurrence.

Maybe you are looking for

  • Question about XML mapping to ABAP internal table

    Hi experts. I'm trying to XML mapping. But it doesn't work well. Assume there are XML file as below. <HEADER>   <ITEM>     <FOO>123</FOO>     <BAR>ABC</BAR>   </ITEM>   <ITEM>     <FOO>456</FOO>     <BAR>DEF</BAR>   </ITEM> <HEADER> and I want to tra

  • Full screen in swf

    Hi Everyone, I have created a flash project in CS5 and I have set the size of the stage to 500 x 400. When I view it in the flash player as the swf it plays fine. What I want to be able to do is get the swf file to fill the screen with the image no m

  • What can I expect in switching from a PC (Sony Vaio) to Mac laptop?

    I plan to purchase a new 14" iBook and use it to take my online classes, as well as archive photos of my artwork. Soon after, I'd like to use it to maintain the website I will be creating. What sort of transitions or problems might I expect with the

  • File Exists on Internet

    I can use Test-Path to find out if C:\Test.csv exists or not How to find out if a file exits on Internet, eg. http://www.domain.com/test.csv ?

  • Help centering text in horizontal Nav bar

    I have just built my styles for my Nav bar and i am trying to figure out how to place everything centered in the div. at the moment they are offset to the left. Fairly new to this. here is my CSS code and underneath the HTML Thanks so much for any he