IPhoto 9.6.1 unable to render file for export
I am now no longer able to export photos as jpg after updating to iPhoto 9.6.1, running Yosemite 10.10.2
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
Similar Messages
-
In iPhoto I get "unable to render file for export" when trying to export a file to an SD card?
I have been trying to save jpg files to an SD card. When I export from iPhoto is says "unable to render file for export". It will let me export to the desktop. Then when I try to copy or move to the SD card, it says the SD card does not have enought free space. It's a 1 gig card and the files are under 100k. I have tried different SD cards, formating the cards with the camera. The card has 200 filles (57mb) when I started and wanted to add more. I have ereased the card trying to see if that would help. No go! Any ideas?
What is the filesystem on that card?
i assume, you made sure that the little white lock mechanism at the side of the card is unlocked?
Try, if you can set the "Ignore ownership on this volume" flag for the card in the "Get Info" panel for the card. -
Iphoto fails to render files for export to certain folders after upgrade
I just upgraded to Yosemite and the latest version of iPhoto but I now unfortunately get an error message when I try to export photos. It seems to work if I export to the main Documents folder but fails if I try to export to a sub folder of the main Documents folder (very odd) which is where I want the exports to be saved. The error message says "Unable to render file for export:/Volumes/NO NAME/DCIM/IMG-1058.jpg". I don't know why the path name shown here is a SD Card path which is not connected. Hope someone can help? It worked fine before the upgrade to iPhoto 9.6.1
Thanks
CraigThe iPhoto preference file might be wonky. Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox. -
SDO_GEOR.importFrom : Unable to render RenderedOp for this operation
Contributors,
I have trouble in loading a persistent LOB into a georaster :
- I use sdo_geor.getRasterSubset to get whole cells (512x512) of band 0 of a 8BIT_U georaster, into a BLOB
- dbms_lob.getLength of the blob gives me correct length : 262144 (=512x512)
- i stored this blob into a persistent LOB (LOB in table)
- just to check, i did dbms_lob.getLength for the BLOB column. gives me 262144
- but when i used SDO_GEOR.importFrom to load the BLOB from the blob table into the georaster table, error occured :
ERROR at line 1:
ORA-13464: error loading GeoRaster data: - Unable to render RenderedOp for this operation.
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_GEOR", line 2966
ORA-06512: at line 7
=========
--this is the code for loading (aboove is the error raised; line 7 is the .importFrom below)
1 DECLARE
2 geor SDO_GEORASTER;
3 pBLOB BLOB;
4 BEGIN
5 select myBLOBcol into pBLOB from myBLOBtab where blob_id=1 for update;
6 select image into geor from experiment where image_id=1 for update;
7 SDO_GEOR.importFrom(geor,'','TIFF',pBLOB,null,null);
8 update experiment set image = geor where image_id=1;
9 commit;
10 end;
11 /
--this is my blob table
spatial@ORCL>desc myBLOBtab
Name Null? Type
BLOB_ID NUMBER
DESCRIPTION VARCHAR2(80)
MYBLOBCOL BLOB
--this is SQL to check the LOB length
spatial@ORCL>select blob_id,
2 dbms_lob.getlength(myBLOBcol)
3 from myblobtab;
BLOB_ID DBMS_LOB.GETLENGTH(MYBLOBCOL)
1 262144
--this is my georaster table
spatial@ORCL>desc experiment
Name Null? Type
IMAGE_ID NUMBER
DESCRIPTION VARCHAR2(100)
IMAGE SDO_GEORASTERThanks for reading and sharing solutions.Jeffrey
All right now am in 11g; after some error in installing 11g, failure in data moving when upgrading from 10gR2 to 11gR1 so i lost all my data (did not backup coz little space left).
Then i decided to get rid all the installed 11g and 10gR2, cleaning up the registry keys, for clean installation of 11g.
The 11g is now installed. I didnot have data backup but for georaster backup i can rely on the raster file and table creation sql i stored in text files. When i use the GeoRasterViewer tool (now version 11) for importing these raster files, the "OK" button in 'Import to DB' dialog does not give me anything. It does not works. Nothing loaded. The raster file is 8 bit TIFF, 512 rows x 512 cols x 15 layers. (i tried different images but no luck).
Here is my table definition :
CREATE TABLE multilayer
(image_id NUMBER,
raster_description VARCHAR2(70),
image SDO_GEORASTER);
CREATE TABLE multilayer_RDT OF SDO_RASTER
(PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber,
rowBlockNumber, columnBlockNumber));
INSERT INTO multilayer
VALUES(1, 'Raster trial KALISYA! 512x512x15', MDSYS.SDO_GEOR.init('multilayer_rdt', 1));
(the createDMLtrigger is not necessary anymore in 11g, right?)Another problem is : i created a georaster table for raster of 4 rows x 4 cols x 4 layers, with my specific value for every cells (64 cells all) specified by .changeCellValue. Here is : CREATE TABLE four (image_ID NUMBER, description VARCHAR2(50), image SDO_GEORASTER);
CREATE TABLE four_RDT OF SDO_RASTER (PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber,rowBlockNumber, columnBlockNumber));
INSERT INTO four VALUES (
1,'A 4rows x 4columns x 4bands image',
sdo_geor.createBlank(
21001, --raster type 3D
SDO_NUMBER_ARRAY(0,0,0), --origin
SDO_NUMBER_ARRAY(4,4,4), --dimension sizes 4x4x4 cells cube
0, --cell values
'four_rdt', 1) --RDT and rasterID
DECLARE
gr sdo_georaster;
BEGIN
SELECT image INTO gr FROM four WHERE image_id=1 FOR UPDATE;
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(0,0,0,0),'0',1);
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(0,1,0,1),'0',2);
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(0,2,0,2),'0',3);
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(0,3,0,3),'0',4);
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(3,2,3,2),'3',63);
SDO_GEOR.changeCellValue(gr,SDO_NUMBER_ARRAY(3,3,3,3),'3',64);
UPDATE four SET image=gr WHERE image_id=1;
COMMIT;
END;
/The console says everything ok but GeoRaster viewer does not show the data AND metadata (metadata tab is blank white). In console i can get the .getCellValue as well (see the value of cell at 4th row 4th col 4th layer is 64).
select sdo_geor.getCellValue(image,0,3,3,3) from four where image_id=1;
SDO_GEOR.GETCELLVALUE(IMAGE,0,3,3,3)
64? These were simple and smooth in 10gR2 but i found them weird in 11g. any suggestion ? i tried validate but no luck as well.
Cheers,
=damon -
Text Message: Unable to execute file for security ...
Whenever I'm viewing a text message, when I try to open up the "Options" menu, I see the above message, "Text Message: Unable to execute file for security reasons". This doesn't seem to impact the functionality of the menu at all, everything seems to work.
Anyone ever come across this before?
I've updated the phone (Nokia E66) to the latest software, and I've only got one application installed other than the default base install (Google calendar sync utility), removing that doesn't change the problem.
Thanks in advance!I get the same error after SW update to latest version when I try to run some apps
-
Cannot export video clips. Get message: "unable to create video for export"
Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GBYes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function. -
How to define table specific QUERY in parameter file for Export Utility
Hi All
I am trying to create A SINGLE parameter file for export utility. I have 2 tables and want to use a different QUERY condition for each of these tables. However i do not want to create 2 seperate parameter files for this and run/script exp twice.
Is there a way to do it ?
NOTE: I am using normal export utility for Version 9 and NOT oracle data pump.
Following is an example of what i want to achive in parameter file:
Tables = (TabA,TabB)
# for table - TabA
QUERY = "where id =25"
#for table - TabB
QUERY = " where court_id=54 and id >1"
Please advice on syntax of parameter file so that exp knows that it has to process 1st condition for only TabA and second condition for TabB.
Any samples/syntax examples are greately appreciated.
thanks in advance!
cool techNo there is no such alternative. Query condition is applicable to all the tables listed in TABLES parameter.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1005843 -
when i queue a file for export the encoder is changing my settings to ACC Audio & my settings are not in the drop down. Help
There's something else going on. When you search, the search box searches the Spotlight database that it created when indexing. It doesn't search the computer again. I suspect a hosed index. System Preferences->Spotlight->Privacy->delete all volumes and readd them back in. That should reindex the computer and all attached HDs. BTW, by default there are many places Spotlight doesn't return information from, mainly the various Library folders and the System folder. If you want to find everything, do this:
Click on the Desktop, CMD+F, click on Kind button, select Other, drill down to File invisible, check it, continue down to System files, check it, and click OK. Now, click on + button, click on the left-hand item and select System files and select are included, click on the plus button, click on the left-hand item and select File visibility and select visible or invisible, select File Name, save the search, drag its icon to the Dock, and use to search your entire Mac—currently starts with By Name, but Contents is available. I use this instead of CMD+F or CMD+spacebar for all searches. -
Missing Render Files / Problem Exporting Quicktime Movie
Everything was going great on my 21 minute project.
I had exported it to iDVD via a Quicktime movie and it looked great in widescreen format. It worked perfectly.
Now, for whatever reason, when I load my project, I get a message saying the Render Files are missing. I am unable to locate them anywhere. I had them stored along with my project on an external firewire 400 drive.
So I press "continue" without finding the missing files.
Now when I export my movie, it appears 4:3 with gray vertical bars on the side!
When I view the project on the canvas, it looks perfect as 16:9. Everything looks normal in FCE.
Did a render file get corrupted or something? Is there a way to delete all the "old" render files and tell Final Cut Express to re-render my entire new project? Would that solve my problem?
Any help is greatly appreciated!I did what you said and the "exported" file says:
Kind: Final Cut Express Movie File
Under More Info it says:
720x480 Integer (Little Indian) Timecode
Total Bit Rate: 30,313
Why am I trying to export?
Before I ran into trouble, I would export my FCE project using the Export Quicktime Movie command.
I then used iDVD (set to 16:9) to burn to DVD.
It worked perfectly before.
But now, all of a sudden, the same project always shows up at 4:3, whether played in Quicktime or when burned to DVD using iDVD set to 16:9.
The version of FCE is 4.0 and the version of Quicktime is 7.4.5
Thank you again for trying to help me! -
FCP deleting render files on export
Hi,
the FCP system that I'm working on (Mac Pro 2 x2.8ghx quad core / 10.6.4 / FCS 3) has developed an annoying problem of deleting render files on sequences when I try to export them. Meaning that I have to continually re-render sequences, and I can't export as a reference clip (because the render files appear to disappear as soon as the sequence is sent to export).
Does anybody have any suggestions that they could help me with? I've got a lot of material (10 shows in ProResLT HD), so it takes a long time to render each show, only to have the renders disappear as soon as the file is exported.
I've tried deleting the preference files, and it's not helping.
My seqeunces have been cut in multi cam (sequences set to ProResLT 1920 x 1080 25p), but have all been collapsed before rendering & export.
thanks in advance for your help!
Cheers
AndrewHi Tom,
I've returned to this project, and I'm still having similar problems - once I've tried to export a sequence, many (but definitely not all) of the renders are lost on export, or if the export was cancelled.
I've been careful to ensure that every option is enabled for the "Render All", and we've reloaded the FCS 3 software, but we're still editing from the same original projects (one project per artist for a batch of artists that we're making DVDs for).
I'd love to hear any more ideas or suggestions.
Cheers
Andrew -
Trimming HD video files for export from Windows to After Effects on a MAC
Hi,
I have some .MTS files created using 2 HD camcorders:
1) Panasonic HDC-TM700 which shoots full HD @ 1920 x 1080 and
2) JVC Everio GZ-HM550 which shoots the same HD resolution
I am working with PP CS5 on Windows 7
I need to trim some small pieces (5 -10 seconds) out of many of the .MTS files to send to someone using After Effects MAC and FC Pro
In trying to keep the highest HD resolution of 1920 x 1080, the number of choices to select when creating a new sequence and then when exporting from PP is confusing.
Note: I notice that 2 clips I have in my PP project bin at the same time have different frame rates which I believe that 1 each came from my different cameras:
file 1) 29.97fps 48000hz compressed stereo
file 2) 59.94fps 48000hz compressed 5.1
Can anyone guide me here on sequence and export settings & codecs to maintain the HD resolution and least loss of quality on export?
Will the 2 different frame rates prior to export cause any issues? I'm assuming PP will re-interpret for output.
Thanks> I understand the files are not compressed.
You misunderstand. The files are compressed. But they're compressed without losing any information. Losslessly compressed movies are a lot smaller than uncompressed movies---but they're still bigger than movies compressed with a lossy codec that would be more suitable for final delivery and distribution.
> How long are the movies your associate sends you and approx what do file sizes look like?
I tend to work on individual clips that are from several seconds to a few minutes long. They're usually a small number of GB each. Don't fret about large file sizes for intermediate files. Making movies small matters when you're streaming them for final delivery, not when you're handing over a hard disk or using an FTP server to exchange files for post-production work. -
Hi,
We created an OS batch file for our daily exports (backups). This file is scheduled to run daily at 7:00 P.M. A test run showed that it did not work. Can somebody find an error in the script?
rem ***** SAMPLE BATCH FILE TO DO DAILY EXPORT ******
@echo Export started at:
@echo
date /T
time /T
rem Here's a one-line NT command (But a long line!)
rem one that splits all the date parts out, outting
rem each one into it's own variable (weekday, day, month, year)
for /f "tokens=1-4 delims=/ " %%a in('date /t') do
(set=weekend=%%a& set day=%%b& set month=%%c& set year=%%d)
set logfile=%year%_%month%_%day%.log
set expfile=%year%_%month%_%day%.exp
set ORACLE_SID=BDC
set ORACLE_HOME=D:\oracle\product\10.2.0
exp system/bdcadmin@bdc full=y grants=y file=D:\export\bdc.dmp log=D:\export\bdc.log compress=N
@echo Export completed at:
@echo
date /T
time /T
rem ************* END OF BATCH FILE *********************
Thank you!You can straight away use this batch file after modifying the exp line with your machine details and schema name.
@echo off
if %1/==:/ goto %2
if NOT %1/==/?/ goto Begin
for %%C in (echo. goto:End) do %%C
:Begin --------------------------------------------------------------
if NOT errorlevel 1 %0 : %OS%Parse MM DD
%0 : %OS%Parse DD MM
:Windows_NTParse ----------------------------------------------------
for /f "tokens=1-4 delims=/.- " %%A in ('date /t') do (
set Dow=%%A&set %3=%%B&set %4=%%C&set YYYY=%%D&goto End)
:Parse --------------------------------------------------------------
for %%C in (md cd) do %%C @tmp@
%COMSPEC% /e:2048 /c ~tmp1.bat > ~tmp2.bat
call ~tmp2
if NOT errorlevel 1 goto Slash
lfnfor on > "%_D%.-"
ren "%_D%.-" "??? ?? ?? ????"
for %%F in ("??? ?? ?? ????") do set _D=%%F
lfnfor off
:Slash
for %%S in ("%3=%%%4%%" "%4=%%YYYY%%" "YYYY=%%1") do echo set %%S>>~tmp1.bat
for %%S in (%_D%) do call ~tmp1 %%S
if errorlevel 1 goto Cleanup
%COMSPEC% /e:2048 /c ~tmp1.bat > ~tmp2.bat
call ~tmp2
:Cleanup
for %%C in ("set _D=" cd.. "deltree /y @tmp@ > NUL") do %%C
:End ----------------------------------------------------------------
exp system/oracle file=D:\Backup\PERF_4.2_%yyyy%%mm%%dd%.dmp log=D:\Backup\PERF_4.2_%yyyy%%mm%%dd%.log owner=TEST
**************************************************************************************** -
Aperture 3.5.1 suddenly unable to render images for the external plugins?
Today when I started to create HDR images using the Photomatix plugin, the dialog: 'Editing Error This image cannot be rendered for editing because Aperture does not support the image format.' appeared. The exact same set of images was processed by the exact same plugin yesterday. Subsequently I tried editing the images with other plugins receiving the same error message. Similarly I was unable to use Photoshop as the external editor on the images. I also reimported the images with the same results. Might I add that Aperture is perfectly able to export the images as TIFF files. It would appear that my copy of Aperture is no longer able to work with plugins. How is this possible when nothing else has changed?
Thanks. Yah, been messing around and found it. Didn't realise it was IPTC data so I never hit the drop down to see what was under it. Dropped one clanger in that I deleted the Copyright Notice from the dropdown as I didn't want to find it stamped it twice as all the images get it on import. Because I deselected it though, it actually deleted what was there. Easy enough to fix of course but, IIRC if you select the Lift / Stamp to lift all the keywords, I seem to recall it stamps them again if you inadvertently re-stamp an image you've already done.
I try to keep this as uncomplicated as possible, could never decide whether to go with title or caption, I guess it matters neither way, unless doing this professionally in which case I guess there are IPTC conventions. -
IPhoto does not import HD video/MTS files for Panasonic Lumix DMC-LX5.
Hello, everyone. I'm using iPhoto '11 on an iMac i7. I recently bought the Panasonic Lumix DMC-LX5, which records HD video (AVCHD Lite). When I insert the memory card into my iMac, it recognizes and imports all photos. However, the videos are left on the memory card, and I cannot even view them in iPhoto. When looking directly in the memory card, I can see the videos (they are MTS files), but nothing will play them. Is there other software I must install to be able to view/edit these video files. I'd like to see them in iPhoto, and then edit them in iMovie like I was able to with my standard definition camera. Any help is appreciated.
Thanks.I have the same camera as you. You can import the files, but you have to convert them manually first, witch takes a couple of secounds.
1. Download and install the automator script from this blog and put it in your dock http://blog.sharkus.com/2010/04/avchd-lite-iphoto-importing.html
2. locate the folder /Private/AVCHD/BDMV/STREAM on your memory card
3. Drag your desired videofile (e.g. 000001.mts) on the automator script you put in your dock in step 1.
4. whait (a couple of secounds, depending file size)
5. Drag your new videofile (e.g. 000001.mts.m4v) to iphoto
6. Finished
Do not try to convert more than two files a once, then the script doesn't work properly.
I hope apple will include support for mts-files very very soon!! -
Unable to see files in "Export Request Attachments " for other users
Hi,
I am trying to see the files that the users have exported.
Navigation:: Admin -->Import and Export Tools -->Export Request Queue.
and then trying to view the files.
I am getting an error as "Access denied.(SBL-DAT-00553)".
thanksDebendra, you will see this error for both export and import request attachments if you are not the owner. This is currently being evaluated and a patch may be coming to change this behavior.
Maybe you are looking for
-
ATV2 upsamples 44.1K CD to 48K
From ATV2 optical audio output my DAC lights up 48K when I'm streaming my ripped CDs (lossless) which are all 44.1K. The Airport Express previously in the exact position streamed at 44.1K. with the corresponding light lit. I wrote one of the designer
-
Billing pages changed to be much less functional
1. Someone changed me from itemised billing without asking permission. Why? I need itemised billing to do my work expenses and tax. I've had itemised billing for several years, why suddenly has it been removed without my consent? 2. To make matters w
-
Oracle Express : Express not switching to EDT
Hi, We have Oracle Express Server 6.2.0.0.0 on NT 4.0 (service pack 6). This week-end the server leaped ahead 1 hour automatically (EDT-Eastern Daylight Time). For some reason, Express is not returning the EDT time but the previous time. We tried reb
-
My safari will not open and it is stating that it has quit unexpectedly help!!!
-
DAC doesn't pickup re-queued tasks
Hi All, I have this weird problem, where DAC wouldn't pickup queued tasks. A task failed during the ETL and DAC went a head executed remaining tasks. I fixed the problem , changed the status of the task to queued and restarted DAC but it fails with f