IPhoto 9.6 hangs when importing raw files.

since upgrading to Yosemite and upgrading iPhoto my macbook pro hangs every time I try to import photos from an SD card. I can import one or two but if I try to import new photos ~300 photos then the kernel task memory usage shoots up to use 95% or more of memory and then it starts running extremely slow and the memory pressure jumps between yellow and red. If I kill iPhoto the kernel task doesn't release the memory.
I have tried uninstalling iPhoto and and restoring and rebuilding the iPhoto library but to no avail at this point.
Anybody have any other ideas or know if there is a bug with iPhoto 9.6 processing raw files?

EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 1:06:31 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 15:20:54
Disk Information: ℹ️
ST1000LM014-1EJ164 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Untitled (disk1) / [Startup]: 998.97 GB (454.39 GB free)
Core Storage: disk0s2 999.35 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
Startup Items: ℹ️
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.sophos.common.servicemanager.plist Support
User Launch Agents: ℹ️
[running] com.amazon.music.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
InfoPlist.strings DocumentHidden (/System/Library/Input Methods/VietnameseIM.app/Contents/Resources/Preferences.prefPane/Contents/Resou rces/ro.lproj/InfoPlist.strings)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CouponPrinter-FireFox_v2: Version: Version 1.1.6
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Picasa: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MySQL Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
Time Machine Disk [Local]
Total size: 1 TB
Total number of backups: 5
Oldest backup: 2014-05-31 19:12:14 +0000
Last backup: 2014-10-17 02:13:59 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      8% mds
      4% WindowServer
      1% com.apple.WebKit.Plugin.64
      1% InterCheck
      1% loginwindow
Top Processes by Memory: ℹ️
54 MB com.apple.WebKit.Plugin.64
43 MB InterCheck
32 MB WindowServer
32 MB Messages
21 MB soagent
Virtual Memory Information: ℹ️
28 MB Free RAM
505 MB Active RAM
489 MB Inactive RAM
8.69 GB Wired RAM
6.64 GB Page-ins
89 MB Page-outs

Similar Messages

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

You know what - I'm sorry
I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
I am officially embarrassed
M

White balance shifting when importing raw files

When I import my raw files from my 5D mark 2 my white balance is set to 5200K, when in Lightroom it shifts to 4850K? Any body know why?

If there are no import presets being applied from the import pane, there's one other way this could be happening. If you're taking advantage of the ability to adjust LR's default import presets (NOT the same as what user web-weaver is talking about which is configured through the import panel) and you accidentally captured a setting other than "as shot" while making the changes, then this is likely your culprite.
This feature is fantastic for automatically applying ISO-specific NR to each file on import, but it can also catch other settings you may not have intended while configuring it. Go back to the files you originally used to set the defaults for each individual ISO, reset the WB to "as shot," and set defaults again. The menu option for this only appears in the develop module. Menu: Develop -> Set Default Settings...
You can also choose to wipe out all previously configured defaults by going to your preferences window, then Presets tab. Look for the "Reset all default Develop settings" button.
Hope this helps you or anyone else who comes along.

Loosing D300 Picture Control settings when importing RAW files into CS3!!

Hi there...I would really appreciate some help!!
I have recently bought a D300/Tamron 17-50mm f2.8 which I love, however, I'm getting increasingly frustrated by either my lack of knowledge or some form of compatibility issue between the D300 and CS3!!
When importing I am loosing all the RAW Picture Control settings!! - e.g. If I shoot using Picture Control "Monochrome" CS3 rips out all of the settings and returns the RAW image back to the default camera settings!! It doesn't seem to be the D300 as Picture Control settings are retained when viewing the RAW images on the camera's screen.
Camera: D300/firmware - default install
Computer: MacBook Pro Intel 2.4Ghz/2Gb RAM | Operating System: OS X 10.5.4 (9E17) | Software: Abobe CS3 with CameraRAW 4.4.1 plugin (also tried beta 4.5 but to no avail!!)
Thanks in advance!!

I am trying to open a NEF file (RAW format) from my card with PhotoShop CS3 and it does not work. These photos were taken with a Nikon D300. A window appears and the message read as follows:
"Could not complete your request because it is not the right kind of document"
Could someone help me?
I have searched the online material and I have not found a solution as of yet.
I have no issues opening JPEGs taken with a D300 and I can open NEF files that were taken with a Nikon D200...
I appreciate your help.

Bypass ACR dialog when importing raw files?

I am batch importing raw image sequences with a script i wrote, but for each sequence it pops up the ACR dialog to allow for raw adjustments before import. I want to just dismiss that dialog automatically with the script, is that possible?
Thanks!

Negatory. Very frustrating.
var test_ACR_bypass = (function(){
var f = new File("/path/to/some/raw/myraw_seq_00000.cr2");
var opt = new ImportOptions(f);
//these don't seem to make a difference.
opt.sequence = true;
opt.forceAlphabetical = true;
app.beginSuppressDialogs();
var imported_item = app.project.importFile(opt);
//neither does this argument
app.endSuppressDialogs(false);
I guess this has something to do with the fact that the ACR dialogue box is a function of the filetype plugin and not the scripting engine? Frustrating regardless, I have to import a *lot* of camera raws and we don't do our grading upon AE import...

Loss of camera settings when importing raw files in Aperture 3

Hello Everyone,
I seem to have an issue with raw pictures taken with a Nikon D90. I noticed that when shooting in raw, any setting I used on the camera (for example B&W or landscape settings) are lost after the pictures are imported in A3. Did anyone else experience the same issue? Is there any solution to this?
Thanks,
Val

Shooting raw will always give best results and probably simplest to do any adjustments you want inside of Aperture. When you select B&W Aperture is not communicating with Nikon fully or visa versa. It is a simple and more rewarding experience to set B&W or any other settings in the Adjustments Pane in Aperture. There is another small tab also called Adjustments which opens a drop down window. Here there are a range of options to choose from one is B&W. Another pane then opens with red green or blue filters. B&W is sensitive to colour. With these you can change the way the grey scale sees things like the blue sky or foliage.
Another nice feature of raw is no need to worry about White Balance. Leave the camera on Auto WB, any inaccuracy can be easily sorted in Aperture. Nikon has quite good auto WB anyway.
To begin, it is best to consider raw as a starting point rather than a finished product until you get used to the things that do and don't interface twixed camera and Aperture.
I hope that is some help. Welcome to Aperture. Allan

What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2. I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
cant wait for next update of lighroom mobile.

With this version of LR Mobile we not support the direct RAW import.
You can vote for this feature request...Lightroom mobile: Ability to import raw files
- Guido

Import "RAW files only" also imports JPEGS (+ steps to reproduce)

I filed this bug report to Apple:
Summary:
When importing "RAW files only" the accompanying JPEGs are also imported when the files are stacked (cmd-K) in the import screen.
Steps to reproduce:
1. Create a new library
2. Insert a card from a camera (checked with Canon G9, Lumix DMC-LX3) which holds RAW files and their accompanying JPEG files (same filename, different extension)
3. Cmd-I to import, if the import screen does not open by itself.
4. Make sure "RAW files only" is selected
5. Select "Uncheck All"
6. Select a few RAW files (for example 4) (click first, shift-click last, click checkbox, all 4 are selected at once)
7. Cmd-K to put them in a stack.
Above the "Import Checked" button the number of files to be imported is shown, 4 in this case.
8. Click "Import Checked"
Wherever the images are imported, not only the 4 RAW files will be imported, but also the accompanying JPEG files. This is also the case when only JPEGs are requested, in that case the RAW files will be imported as well.
Is is essential that the images to be imported are stacked in the import screen. If this is omitted, only the requested files (either RAW of JPEG) are imported (4 in this example).
Koen

Hi again
Sorry the delay in getting back to my post but I've been a tad busy.
Well, after a bit of testing I can confirm that the problem does seem to be an issue with Vista (32bit and 34 bit) as Jeff states.
I tried importing the raw files into Vista 32-bit, Vista 64-bit and XP 32-bit and whilst all operating systems allowed the import of JPEG files, I was only able to import the raw files into XP.
I havent got a card reader so am unable to test this at the moment.
Stephen

Importing RAW files with keywords from Bridge

Hi everyone,
I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
Why does this not work for RAW files? What do I have to do in order to get it to work?
Thanks in advance for your advise
/David

When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
Perhaps someone else will explain this better than I.

Can't import RAW files into iPhoto 6 Library from Nikon D700

For whatever reason I am unable to import RAW files from my Nikon D700 into my iPhoto 6 (version 6.0.6) Library. I can import JPEGs from the D700, but it's no-go with the RAW files. When I attempt to import the RAW files I get the following message:
"Unreadable Files
The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)."
Can anybody solve this mystery for me?
Bob

Bob
I presume that the economically-priced Mac Box Set containing OS X 10.5.6 Leopard, iLife '09, and iWork '09 would be the way to go. Do you concur?
Well that's the cheapest way to do it. You could, of course, buy a new Mac
Do you feel that my 20" Intel iMac--details listed below--would have any problems handling the upgraded programs?
It will have no problems with the updated OS or applications.
'm uneasy at the thought of upgrading my operating system, but I presume that chances of running into problems are much less than if I were upgrading a Windows OS. In case a problem arises my entire hard drive is backed up with a 1T external hard drive using SuperDuper software, but I prefer not to encounter a situation requiring me to use it for restoration purposes.
The key to any update or upgrade is to make sure that you have a good working back up. That way, should anything go wrong, you have a quick way back to where you started.
My tips for upgrading the OS? Disconnect the disk with the back up and all other peripherals when you do the Upgrade. Pop the disk in. Do a standard Upgrade. (There are some folks who swear that you should wipe your HD and start over from scratch before you do, but, frankly, that's overkill. I've been upgrading Macs since 1992 and never had a problem.
Regards
TD

Importing RAW files into iPhoto'08

I'm trying to import photo's taken in a RAW format from my Canon 550d into iPhoto'08 and all the time after trying to move the photo into an album I get an error message saying 'unable to import unreadable file'.
could this be due to a software update needed for iPhoto'08 for the 550d which I have yet to install?
I have noticed on occasion, a software update would come up to support other camera's when using RAW files.

since I've downloaded the trial version of Aperture 3 I have noticed I can now import and work on RAW images taken off my 550d in iPhoto '08.
so it seems thats a way to get it to work. although now that I'm using Aperture 3 (just the trial version for now), I do not want to go back to using iPhoto '08! lol, its a cruel world...

Iphoto 8 after update won't import RAW files

I'm running iphoto 8 version 7.1.3 and just updated the software from Apple's auto update (Jun 30th is when the update installed). Now I can't import RAW files from my canon 30D, from a memory card or from existing files. Every time I try iphoto freezes and I have to reboot the computer. Add to that, iphoto has now "lost" most of the pictures - ie it doesn't show them in the events or photos areas. I have managed to find the photos in the library, but when I try to import them back into iphoto, if there are any RAW files in the folders, I get the same problem as before - iphoto freezing, and having to restart the computer.
has anyone else experienced this problem? Or have any suggestions for solutions?
thanks

Welcome to the Apple Discussions. Are you shooting RAW + jpeg or just RAW. If it the former another user found out that shooting the combination of formats was not supported by iPhoto but shooting just the RAW was.
For the missing file issue try the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open Photo window
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

"unsupported image file" when importing RAW images from Olympus E-PL1

When I try to import images save in RAW format on the camera, the images import but they can't be displayed (all I get is a warning triangle with the words "unsupported image format" below it, though in the import preview the images are displayed properly.
EDIT: just noticed that the E-PL1 isn't listed as being supported, just the E-P1 & 2
Message was edited by: drathquark

Apple have just included RAW support for the Olympus E-PL1 with the Digital Camera Raw Compatibility Update 3.3 - iPhoto can now import RAW files from the E-PL1.

IPhoto not displaying imported RAW files

I have the latest OS and iPhoto, and am importing Nikon RAW NEF files from my D7000 into iPhoto...Yes, the OS sees/opens the files, iPhoto does as well, when importing...but afterwards I go to Events and all I get are black boxes with white dotted outlines. If I go to edit mode, it shows thumbnails below, but I get a triangular exclamation point symbol where the photo should be. The event does show a photo count, and even shows the meta data info from each photo...but no photo image! Help...

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

When I try to import raw files from my nikon d600 I get the message Unsupported image format, When I try to import raw files from my nikon d600 I get the message Unsupported image format

When I import raw files from my Nikon D600 into Aperture I get a tryangle sign with "unsupported image format"

Latest Adobe DNG converter (7.2) DOES indeed convert NEF pictures coming from a D600.
Head up to Adobe's website and download the app.
You'll only miss the focus information (focus distance and focus sensors used), but you'll be able to work with raw and not rely on jpg only!

IPhoto 9.6 hangs when importing raw files.

Similar Messages

Maybe you are looking for