IPhoto acting weird uploading full CompactFlash with RAW

I'm trying to upload 3.8GB worth of RAW photos from my full 4GB SanDisk Extreme III CompactFlash card. My PowerBook says it has 7.2GB available. But with over 50 photos to go, I get a message saying the hard drive is nearly full, start deleting files. The upload stops at photo no. 178, all previous photos up to that point are uploaded into iPhoto, but my hard drive says it still has 2.71GB available!
I quit iPhoto and when I re-launch, it states the iPhoto Library has 356 photos that have not been imported, would I like to do that? I answer No (out of fear I will run out of hard drive room) and it turns out the 356 are the first 178 RAW, plus what I guess are the embedded jpeg files that go with them.
Why did iPhoto erroneously state I was running out of room and force me to stop the upload? And now that I know I have room, how do I re-import the first 178 and continue with the import of the remaining files? Thanks in advance.

Dino
Why did iPhoto erroneously state I was running out of room and force me to stop the upload?
It didn't. To copy the 3.8 gigs of data OS X will use about twice that. That's how copying works.
but my hard drive says it still has 2.71GB available!
The Finder is notoriously unreliable at reporting disk space, and is very slow to update.
Your HD is dangerously overfull and you are running the risk of data corruption. OS X needs about 10 gigs of free space to operate: this is used for temporary files, virtual memory and other OS operations. Without this space the OS will slow down as it searches for space to put data, apps become unstable and liable to crash and the risk of data corruption is increased exponentially.
Your next job is to clear space - a lot of it - on that HD.
You can run your entire iPhoto Library Folder from an external disk, as you can with iTunes.
Regards
TD

Similar Messages

Trouble with iPhoto after latest update for compatibility with RAW-files

Hi all, I'm having serious trouble with iPhoto since the latest update for compatibility with RAW-files for digital fotocamera's (version 2.4).
After connection with the camera iphoto starts up as usual and i can start importing my pictures. So far all goes well. After having imported my pictures (visual with thumbs and so one) and having created an event iPhoto isn't able to show any pictures. Stopping and restarting Iphoto gives a message that there are a number of photo's available that havent been imported yet (!!???). I can choose to import or ignore. Whatever i choose i'm not capable of visualising the photo's.
Anyone with a similar problem and the solution? Can i remove the update?
I've tried several camera's all with the same problem.
thx for any replies
niki001

Hi Terence, thanks for the reply (i'll wait with the downgrade for now ;-p).
I made a small step by step report of my findings:
1. Attach camera to imac
2. iPhoto starts up with previews of the pictures (so far so good)
3. Give event-name and start import ( so far so good)
4. 'Latest Import'-report all fine, previews ok, check with event : previews fine. All seems well
5. disconnect camera, stop iPhoto. As far as now all seems normal.
6. Restart iPhoto : Message 'iPhoto Library contains photo's which havent been imported. Import Y/N?'.!!!???
7. Option Y : IPhoto imports photo's imported in step 3 in a new event box (shown as a 'black box' on screen). Last made event (step 3) shows up as a black square in overview all events. Double click on event gives empty squares where previews should appear. Double click on photo preview gives large explanationmark on screen.
8. Drag event-box over screen shows thumbs within square, release event returns to 'black box'.
9. Shut down iPhoto.
10. Restart iPhoto jumps back to step 6 as long as i keep answering Y.(Each time creating a new extra 'black box event').
11. When i now look within iPhoto Library i can find a map Import in which i can find back the last imported photo's from step 3.
12. Dragging these pictures to my desktop (preview gives no problem at all) and from there back in to iPhoto simply recreats a new 'black box event'.
13. In step 6 option N gives a message 'creat iphoto Library recovered'. In iPhoto Library map Import has disapeared.
14.When looking into map 'iphoto Library recovered' i can find my originally iported photo's. However same problem as in step 12.
I used aperture (trial version) to see wether the problem could be photo-related, but here al goes well.
So, any idea's???
thx

Flickr upload from iPhoto acting weird since last update

Hi
I am currently uploading photos to Flickr on a regular basis.
however since iPhoto's latest update (the one that changed the look of icons in the sidebar...) I am seeing constant problems with uploads. They usually get stuck very shortly after they started. As I am writing this, an upload is stuck at "time remaining: 2 minutes" and has been for over 10 minutes for an upload of just 20 small-sized pics. When the upload is smaller, it gets stuck at the "Pending" state forever (I've left iPhoto running in the background for several hours and it was still stuck at that level after 4 hours).
anyone else experiencing this?
any idea or help appreciated
Note: my iPhoto library is in my Dropbox and I am running iPhoto 9.1.5 on Snow Leopard 10.6.8

I'm having the same problem. Whenever I try to use iPhoto to upload photos to Flickr, it takes a loooooong time, gets hung up a lot, is forever "pending" and is just a huge waste of time! Really frustrating.
I'm running OSX, 10.6.8 and I'm using iPhoto '11 version 9.1.5. I'm uploading the photos at full resolution (3648x2746px), which obviously is going to take longer than uploading smaller versions, but it's not THAT big - shouldn't take all day. At first I thought this problem might be related to some kind of problems with internet connection, but I've tried in a lot of different places, including at home, where i have a great internet connection and normally no problems.
I've been struggling with this for a few months and it's totally driving me nuts - if I can't figure this out soon, I am going to quit using iPhoto entirely.
Does anybody use iPhoto with Flickr successfully?

Iphoto 6 and using Adobe Elements with RAW?

When I open Elements and proceed to open a RAW file it will not open picture taken with Canon RAW. It asks for a file size? Any suggestions?

matbran1:
Welcome to the Apple Discussions. You may need Adobe - Photoshop Elements : For Macintosh : Camera Raw 3.6 Beta ... this plugin for PE3 to handle RAW.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Iphoto photos not uploading to internet with prompt box

I downloaded 'Lightroom' to my macbook pro, and now when I go to upload photos to the internet the prompt box wont come up so I can choose which photos. Any ideas!?

I want to be able to choose the photos to upload from iphoto, not the lightroom software

Help with Spry, acting weird in Mac Os 10.5 10.6, 10.7 and Ios Devices

I use Dreamweaver CS4 for designing our school website. The url is http://www.stpiusxschool.org
The menu bar on the left is built with a Spry Asset, it is to expand to different choices on some of the lines. The issue started about a month ago, if I click on the first item that should expand out (Parent Resources) it will not expand out, then I choose the second one (Student Resources) it expands out, I go back to Parent Resources and it will expand....this happen on Mac 10.5 and Ios Devices (Ipad, and Iphone)
On Mac 10.6 menu bars will never expand out.
I have tried many things, I have ran the Spry Updater and uploaded those files. I have built a page outside of my site, it appears to work ok, then copied that Spry Asset folder into the site, no luck.
I have built a second spry on a test page within the site, and tried it out, it doesn't seem to work correct either. It can be accessed off the main page mentioned above, scroll to the bottom and click on test, that is just what it is a test page.
School is starting soon and this site is used a lot for resources during the day.
I have called Adobe and got no where with them but that even took hours.
If someone could help me out that would be awesome.
By the way, I know nothing about coding itself.
Thanks

You have got two problems
The menu is acting weird in Mac as well as on PC
The menu does not behave in IOS devices
The solutions
Add the DOCTYPE Declaration to your document(s)
Replace the current SpryMenuBar for an IOS friendly MenuBar
1. You can add the HTML5 document type as follows, making sure that there are no blank lines before <!DOCTYPE HTML>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>St Pius X School des moines iowa</title>
The title already existsin your document. I put it there so that it is easier to see where the rest goes.
2. There is a Spry Menu Bar 2.0 available here http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141544
Gramps

Iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

iphoto does not support the resolution of my dslr camera...how do i upload full resolution photos?

You actually need to give information to get help - just stating an abstract problems (which is most certainly not a problem at all) gives the volunteers hearer nothing to work with to help you
What version of iPhoto? Of the OS? What exactly is the problem (iPhoto does support the resolution of your camera so that is NOT a problem)? what exactly are you doing? What error messages do you get? why do you incorrectly think that iPhoto does not support full resolution?
At this time your question is like my car won't start - why not? Could be anything from you did not put the key jun to being out of gas to having the engine stolen - no way to tell anything - except that the problem you claim is not true (at least in my example I would know that the car did not start)
LN

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarney

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

Working with RAW files in iPhoto 5.0.4 and Elements 4.0.1

I take photos in RAW mode and download them to iPhoto. When I try to edit the photo in iPhoto, the picture is a tiny little file that is impossible to enlarge with any sort of clarity. Also, the word "RAW" does not appear anywhere on the iPhoto window like I read it is supposed to.
When I drag the file to Photoshop Elements, I get an editing window that has none of the tools usually associated with JPEG files. I get a separate window in which I can darken or lighten the image, that's it.
Clearly, I'm doing something wrong. No one in their right mind would ever use RAW if this is how it works.
Any ideas?

Hi Jack!
If you're new working with RAW files, your right, it just doesn't make sense. RAW <imho> is a bit overrated. One thing you will need to keep in mind when shooting in RAW, is you will still need to take a well exposed image. What RAW files will allow are CHANGES in all areas of the image v. JPEG which may allow you to ADJUST a few settings in the image. My only suggestion would be to kepp playing around with PSE until you get the hang of it, it is an excellent image editing software. But realize, a well exposed JPEG and RAW file are hard to tell apart...
Personally, I do not directly download RAW files through iPhoto but will create a folder and download to here, and simply drage folder to iPhoto to import (which are then 'converted' into JPEG files). This way I have the original RAW images safely located outside of iPhoto as well as in iPhoto. You should set Elements as your choice of application to edit files inside iPhoto.
Good luck, Rick
Good link: http://www.elementsvillage.com/forums/ and just for fun: http://www.photoshopcosmetics.com/index.php

Iphoto 6 (deleting pictures & working with RAW)

two questions:
(1) If I delete a picture in my library and then empty trash is the picture gone from my hard drive? From the Iphoto folder(s)?
(2) I hear with Iphoto6 you can set preferences so that RAW files are saved as 16 bit TIFF files instead of JPEG files so that when you are editing them you are editing a lossless file? Is this correct...what exactly does that mean?
Thanks,
Andy

matbran
(1) If I delete a picture in my library and then empty trash is the picture gone from my hard drive? From the Iphoto folder(s)?
Yes. But not iuntil you empty the iPhoto trash.
(2) I hear with Iphoto6 you can set preferences so that RAW files are saved as 16 bit TIFF files instead of JPEG files so that when you are editing them you are editing a lossless file? Is this correct...what exactly does that mean?
Yes, this is set at Preferences -> Advanced
What it means is that jpeg is a compressed format, which saves space, but is a lossy format - that is everytime you edit and save a jpeg you throw away information, and the file gets a little smaller. To the eternal credit of those who developed the format, you have to waaaay down the generations before you see a difference onscreen. It shows up sooner in print.
.tiff not a lossy format, so nothing is thrown away when you save. But the file size are much bigger, they could be 10 times the size of the corresponding jpeg.
btw the same is true of mp3 files and aiff music files.
Regards
TD

OK I'M DONE WITH PSCS6, TEXT AGAIN ACTING WEIRD :(

What is the problem?
My text AGAIN --3 times so far -- is acting weird
What is wrong Adobe?
Here is the file
https://dl.dropbox.com/u/78286037/Luis2%20Door%20Hanger.psd
Now what?
Is this only me?
Have you --ANY OF YOU-- had this kind of problems?
So frustrated

Upadate about this issue from Pattie Foxhoven
"This one is tricky and has only happened to a very few people and we are trying hard to track down the cause and fix it."
I must say that I had been in contact --by email-- to 2 different people from Adobe,
and both of them had been very nice and quick to respond
Point to Adobe !!!
So, I hope that soon my belove PSCS6 will be OK
Saludos

Working with RAW files

I have a Nikon D200 and have been taking some pictures in their RAW format (.NEF) and have some questions. It transfers the pictures fine but then does some other weird stuff.
Sometimes, for seemingly no reason at all, when working in iPhoto, it changes the format to a jpeg and while others remain RAW. I looked in my iPhoto Library in my user folder and it looks like iPhoto automatically converts every RAW picture into a jpeg. But in the iPhoto window, sometimes you're looking at the jpeg and sometimes you're looking at the RAW. Is there some way to make iPhoto act more consistently? And can I make iPhoto stop automatically creating a jpeg version of each RAW photo?
Also, I exported some RAW pictures as TIFF's to work with in photoshop. Once there, the pictures only have a dpi resolution of 72 pixels per square inch. That's way too low for my purposes. Does anybody know if there is a setting or something where I can change this?

Hi BW Lee,
I don't take RAW, but I can get you started with some info to help you out:
Supported RAW cameras
iPhoto 5 Frequently Asked Questions (FAQ): Working with RAW images
Working with RAW in iPhoto 5
For iPhoto 6 check out this link;
http://www.thedigitalstory.com/blog/2006/01/iphoto6_changesfor.html

Losing network connection and NIC acts weird from warm/hot weather/temperatures?

Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:08 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:20 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource   Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF   ATI Radeon HD 4800 Series
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21   OHCI Compliant IEEE 1394 Host Controller
IRQ 21   TechniSat DVB-PC TV Star PCI
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16   Standard Dual Channel PCI IDE Controller
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16   ASUS TV880 Video Capture (NTSC)
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF   Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF   ATI Radeon HD 4800 Series
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF   ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF   System board
Memory Address 0xFED90000-0xFED93FFF   System board
I/O Port 0x000003B0-0x000003BB   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB   ATI Radeon HD 4800 Series
[IRQs]
Resource   Device   Status
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21   OK
IRQ 16   ATI Radeon HD 4800 Series   OK
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37   OK
IRQ 16   Standard Dual Channel PCI IDE Controller   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A   OK
IRQ 16   ASUS TV880 Video Capture (NTSC)   OK
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio   OK
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40   OK
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC   OK
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 21   TechniSat DVB-PC TV Star PCI   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35   OK
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20   OK
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26   OK
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C   OK
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36   OK
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34   OK
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A   OK
IRQ 20   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 22   TechniSat DVB-PC TV Star PCI #3   OK
IRQ 0   System timer   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 13   Numeric data processor   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 12   Microsoft PS/2 Mouse   OK
IRQ 14   Intel(R) ICH10 Family SMBus Controller - 3A30   OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

How come I can't see my iPhoto library when uploading?

When I want to upload a photo to the internet, craigslist.org for instance. I click upload to browse for photo then go to my photos but the iPhoto library icon is grayed out. I know how to get around it by dragging the selected photos to my desktop then uploading those. It takes forever to open iphoto so i rarely open it, but all my pictures are in there and there is no other way to get to them other than opening them. Is there an easier way? Why?
Thanks
Charles

Charles
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto. With 10.5 you can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.*
*Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS*
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
I've highlighted the one's that may be of most use to you.

MacBook Pro acting weird at startup

Hi,
First of all thank you for reading this, it's quite a long story. And sorry for any grammatical mistakes, I'm Dutch.
Summary
My MBP suddenly has been acting really weird: kernel_task eating 150-200% of the CPU which caused a super slow MBP, power button not working well, and MBP shutdown after ten minutes without touching it and with the battery on 90%. I did a clean install of OS X Lion, some PRAM and SMC resets and removed the MacBookPro7_1.plist file from the system library. The kernel_task high CPU problem is now fixed. But the power button is still not working: most of the time my MBP shuts down three seconds after I push the power button in a first attempt. In the second attempt I hold it for like five seconds and this works. Sometimes it works fine on the first attempt. Restarting the MBP from the desktop works fine. I'm also worried about the random shutdown. What could probably cause the problem with the power button and the MBP shutting down when I don't touch it, and is there a way to fix this myself? I'm not really into tech, so please keep your answer simple.
My MacBook Pro "13 (mid 2010) with OS X Lion has always been a charm since I bought it. I've never had any problems with my MBP until now. Two weeks ago I was going on a holiday and had to check a few things on my MBP in a hurry right before I was leaving. I'm afraid I forgot to turn off my MBP before I went on my holiday, but I can't remember this exactly. When I came back after a week, my MBP started acting weird at startup and then became really slow. The kernel_task was eating my CPU with 200% and I've tried many things to fix the MBP myself but it still isn't working well. I hope you can help me with this.
This is what happened:
1. When I push the power button to start my MBP, the first time it shuts down three seconds after I push the button. After the first attempt I hold the power button for five seconds, and my MBP turns on the right way. After all the fixes I've done this is still an issue.
2. When I finally got my MBP started the first time after my holiday, it was really really really slow. I later found out that the cause was the kernel_task eating my CPU. It was using 150-200% with no applications running.
3. The MBP was acting normally (not slow) in safe mode, but in safe mode I couldn't open some sites in Google Chrome, like Facebook and Google Maps. So this didn't work either (and was not the solution to my problem).
4. I did some things with PRAM and SMC reset but this didn't work.
5. A clean install was already on my mind for weeks, so I decided that this was the right moment. After I did a manual backup (not with Time Machine) I restarted my MBP holding some buttons to startup the OS X Utilities screen. I first erased my Macintosh HD and then I wanted to install Mavericks because that was the only option from the menu. It took me five hours and at the end it came up with a 'can't download Mavericks, try again' screen. The MBP wasn't starting up anymore because OS X Lion was already erased.
6. So I became annoyed and decided to use my original Snow Leopard dvd which came with my MBP. Installing Snow Leopard took me two days!!!!!!!
7. When I finally got Snow Leopard installed, it still was really really slow and the kernel_task was messing up my CPU again.
8. After some hours of searching on the internet, I read the following thing: fixing the kernel_task problem was easy by removing a file from the system library (http://www.rdoxenham.com/?p=259). Of course I've researched this solution because I'm not a fan of changing things in the system. But I decided to give this a try and it worked! Like a charm!
9. I still was on Snow Leopard and decided to upgrade to Lion again, because I did know for sure that my MBP could handle Lion and I wasn't sure with Mavericks. So I first downloaded Lion from the App Store and then opened the installation program. This took me one day again, probably because the file from the system library was put back with the installation of Lion...
10. When I finally got Lion running, the kernel_task was using a high CPU% again so I removed the file from the system library again and restarted my MBP. This worked.
11. I'm working on Lion for a day now and I've installed some applications (Adobe CS5 Master Collection, Office for Mac, updated my 17.000 mails in Mac Mail, and installed some browsers). It's working fine and the kernel_task is at 1-10%. The issue with the power button is still there but sometimes it works fine at the first attempt. Yesterday my MBP suddenly shut down when I didn't touch it for like ten minutes. The battery was still on 90%. Maybe this was caused by the fact that my MBP was running for four days non stop because of the OS X installations, and it was a hot day yesterday.
So this is what I've done so far in this order:
1. First of all I did a manual backup on my external HDD. Not with Time Machine.
2. I tried to restart my MBP multiple times. Restarting from the desktop worked well, but shutting it down and than turning it on with the power button didn't work well.
3. I did PRAM and SMC resets multiple times.
4. I decided to do a clean install and erased my Macintosh HD from the OS X Utilities screen at startup.
5. Then I wanted to upgrade from Lion to Mavericks but Mavericks couldn't be downloaded.
6. I've installed Snow Leopard from the original dvd, this took me two days.
7. I've followed the instructions from http://www.rdoxenham.com/?p=259 (remove the file MacBookPro7_1.plist from the system library) and this worked for my MBP.
8. Because my MBP was working fine again, I decided to upgrade to Lion. This took me one day.
9. My MBP was really slow again: Lion put the MacBookPro7_1.plist back in the system library so I removed it again. This worked.
10. The problem with the power button still holds so I did a SMC reset again. Didn't work. My MBP also shut down yesterday when I didn't touch it for like ten minutes. I hope this was caused by the fact that the MBP was running for four days non stop, and it was a hot day so maybe it was overheated.
So everything is working fine again, but the power button still isn't. Most of the time my MBP shuts down three seconds after I push the power button. In the second attempt I hold it for like five seconds and this works. Restarting the MBP from the desktop works fine, and the kernel_task is now using 1-10%. I'm also worried about my MBP suddenly shutting down. Is there a way to fix this myself?
Thank you!
Regards,
TokkieTor

TokkieTor,
This is the full error message I got from the test:
4SNS/1/40000000: IP0R-9:166
I read that those letters (IP0R) stand for different errors in the hardware, in my case it's something with the Power Bus according to this website: http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/.
Again, I'm really not into tech so what is a Power Bus and should I be worried?
what you have is a problem with a sensor which monitors power bus current. The power bus is the main pathway along which electricity travels in your MacBook Pro. If the sensor isn’t individually repairable, then you could have reason to worry — if they tell you that a logic board replacement would be needed, then that could cost hundreds of euros. (One would hope that replacing a sensor would not require a logic board replacement, but only hardware experts can say for sure.)
I think that posts here are only editable for ten or fifteen minutes after replying.

IPhoto acting weird uploading full CompactFlash with RAW

Similar Messages

Maybe you are looking for