IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN

Similar Messages

  • Aperture: After changed the file name in Finder Aperture can't load the referenced file anymore

    After I've changed the file name/format in Finder Aperture can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

    As you told, the command "Locate Referenced File" doesn't work, if the filename doen't match exactly. And the filenames should keep their new names.
    "Locate Referenced File" will be able to reconnect one file at a time, if you direct Aperture to the matching file in the Loate Referenced File dialog, but it will not be able to recognise the other matching referenced files and to reconnect them all at once with the "Reconnect All" button.
    It will be a lot of work to reconnect the one by one.  Usually it is much easier to rename the original master files using Metadata > Batch change in Aperture than to try to do that in the Finder.

  • The whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

    the whatspp massenger icon has disappeard from my screen i can only open the whatspp from search or find,How can i fix it?.

    The app is not gone, it is impossible to remove it from the device.
    Check all home screens and folders.
    If you are unable to find it, Settings > General > Reset > Reset Home Screen Layout.
    As a last resort, restore from backup.

  • I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

    I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

    Hmmm.  Maybe try this?
    OS X: Changing or resetting an account password

  • I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

    I have iCloud on MY PC and when I try to download attachments it is changing the file name to messagepart. What can i do to change this?

    I don't think this is an iCloud issue- it is the latest release of Safari. Firefox attachments are still correctly downloaded.
    This needs some interest from Apple techs.

  • When I try importing a CD following message comes up: error occurred whilst converting file " name of fist song on CD" You do not have the privilege to make changes.  Any ideas?  thanks  John.

    When I try importing a CD following message comes up: error occurred whilst converting file " name of fist song on CD" You do not have the privilege to make changes.  Any ideas?  thanks  John.

    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • File names of images in IPhoto

    I have two questions. Does anyone know how to see the photo/file name of images loaded into IPhoto? Is there a setting that you can turn on to show the file name under each image?
    Secondly. While trying to find answers to the above question I did discover the export originals option which would allow me to export images into a separate folder that does list the image numbers. This is a work around but not really what I'm after.
    Doing this export I did get a folder of images with their respective file numbers attached. However, what is interesting and I'm hoping someone can answer is that many of the images that should have had my own personal image number, were actually labeled Slide 1, slide 2, etc, etc. When I originally imported these images they contained a number that looked like this 00478-22135. Does anyone know if the dash between the number may not be recognized by IPhoto which it then just labels a generic number it makes up on import? Or any other reason why it would not have accepted my original file name? I know it does accept some file names since several images with a different number format such as D223567 imported just fine and then exported with the correct original file names. Any suggestions are greatly appreciated.
    MacBook Pro Mac OS X (10.4.7)
    MacBook Pro   Mac OS X (10.4.7)  

    Jim:
    Under the View menu select "Titles" to get the file names. I don't know what you did but I just tried an import of a file titled 00478-22135.jpg and it kept the file name OK.
    When you exported the files what was the Album name and did you use the "Use Album Name" option in the export". If the Album was titled Slides then you would get new file names titled "Slide-1.jpg", etc. That may be the reason.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync each phone separately

    I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync contacts separately?

    How to rename your device in iTunes

  • HT1386 Trying to sync my music into my iphone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

    Trying to sync music into my iPhone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

    Remove any duplicates in your iTunes Music Library by following the link below:
    How to find and remove duplicate items in your iTunes library
    Then try to sync again.

  • How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

    How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

    If the size of the iPhone backup is putting you over the edge you have bigger problems than just this backup. You really need to solve the fundamental problem of your C: partition being too small. Even if you could solve the iPhone problem something else will come up soon that will again challenge your disk space. New drives can be had for well under $100, and even a 500 GB drive is only a little more than $100. This would be a good time to upgrade. You can even clone your current drive AND increase the partition size in one step with disk imaging software such as Acronis True Image.

  • How do I change my user name and password if I can't logon to the computer?

    how do I change my user name and password if I can't logon to the computer?

    What Mac is this with what version of OS X?

  • Rename file name & format using ftp sender

    Hi all,
    This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
    At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
    client format is  :  SAP_Order.txt (Pervious file name).
    We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
    How can i achieve this requirement?
    Can please suggests me solutions ASAP.
    Best Regards,
    satya,

    Hi,
       if your requirement is to pick the  existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
    then its simple...
    use two receivers instead of one , one for point to target and other for sender itself... (second receiver  is for  changing  the file name format....)
    Hope the above understanding is correct...if not provide more details of your requirement...
    HTH
    Rajesh

  • Run Applet On Server Using 8.3 File Name Format

    Hello Everyone,
    I am currently trying to produce an applet that will display content from a PLC (which hosts its own webpage).The PLC itself only allows files using the 8.3 file name format to be stored on it (eg. 123456789.123).
    I have tried a few simple things, such as changing the ".class" file extension to ".cls". But this just produced an error in my internet browser (IE 8).
    Any help and/or work-arounds would be greatly appreciated.
    Thank you,
    Vincent Wiebe

    849427 wrote:
    ..I did not think of that, ..That's why forums rock. Many minds are better than one. ;)
    Thank you very much :)You're welcome. :-)

  • I spent ages renaming and sorting my holiday photos in correct order but when uploaded to print they reverted to the original name and order? How can I stop this happening?

    I spent ages renaming and sorting my holiday photos in correct order but when uploaded to print they reverted to the original name and order? How can I stop this happening?

    When you "rename" a photo in iPhoto you're adding a Title to the shot, not renaming the file. This si quite standard metadata in photography, but it appars that it's getting lost in the upload/at Snapfish process.
    You can use the Titles as filenames if you export using the File -> Export command. It's one of the options in the export dialogue. You can upload the exported items.
    Regards
    TD

  • Custom File Name Format in B2B Console

    Hi,
    Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
    I have read the Oracle doc and only the following formats are mentioned:
    %FROM_PARTY%
    %TO_PARTY%
    %DOCTYPE_NAME%
    %DOCTYPE_REVISION%
    %MSG_ID%
    %TIMESTAMP%
    Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
    You help is appreciated.
    Thanks
    Priyanka G

    no. It has the format which helps B2B in identifying the agreement

Maybe you are looking for

  • External Monitor RF Frequency

    So, recently I tried transforming my MacBook into a home workstation. I got a laptop stand, and Mini-DVI to DVI adapter to plug my MacBook into my monitor. When the monitor is connected to the MacBook (and the monitor is turned on), the wifi won't wo

  • Photo journals on iPhoto for Mac

    Hi, Will Photo Journals be added to iPhoto for Mac (and not only an IOS iPhoto feature)? I used to use a lot the mobileme gallery, and the photo journals could be a great alternative. Thanks Antoine

  • P&L A/c and Balance Sheet according Schedule VI in PCA

    Dear SAP Gurus,    My cleint needs to see his P&L A/c and Balance Sheet according Schedule VI in Profit Center Accounting. Because all Branches are Profit Centers. So he need to see his Branches P&L and BS by Schedule VI. How can I acheive this in Pr

  • How do I enter 1E23*Exp(1​53.08*x) on the formula line in Eval Single-Var​iable Scalar vi

    I am trying to figure out how to enter 1E23*Exp(153.08*x) on the formula line in Eval Single-Variable Scalar vi. Thanks for your help

  • ESS Salary Statement 'No result exist'

    Hi All, We are setting-up our salary statements on ESS and I am getting this error. I can see results in the overview section, but no form. We are using the HR Forms (PE51) method. I think I have the features setup correctly. EDTIN: CUS&BEHR_MXESS HR