Iphoto and itunes are not loading in idvd

Hello, I'm trying to burn a dvd. I select Media and from the 3 possibilities- Audio, Phot and Film- i can only access Film. When i click on Photo, it says "open i photo 5 or later to see iphoto library, when i click Audio, it says the same thing. When i was working on a projeckt in idvd on my external HD, both Audio itunes and Photo iphoto were available. Anybody have simple suggestions? thanks

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

Similar Messages

The iphoto and itunes will not open please help

on my Mac G5 the iphoto and itunes will not open can anyone help

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then, hold the Option key down when trying to open iPhoto, does it ask where it's Library is? Or what exactly happens?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

I backed up my macbook pro using time machine and now my iphoto and itunes are empty. how do I reset the computer to an earlier date?

I backed up my macbook pro using time machine and now my iphoto and itunes are empty. how do I reset the computer to an earlier date? and why would this have happened?

Without more information, I can't tell you why it happened. As to how to restore to an earlier date, please check out the article below. Should help you to restore form a time machine backup.
http://support.apple.com/kb/HT1427

In fire fox and google chrome CSS and images are not loading

I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
in fire fox and google chrome requests are Aborted.
thanks
Ashok Gadiparthi.

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

Css and images are not loading in SharePoint website

Scenario:-
System Configuration- Windows server 2008 R2, SharePoint Designer 2010, SP server 2010 all are in Local Machine.
1. I had reset the Windows server 2008 R2 password and opened SharePoint Designer 2010.
2. Opened previous working site and found error- services unavailable- HTTP Error 503. The service is unavailable
3. For this issue, I reset (as I reset for windows server) the Identity password in App pool for "SharePoint Central Administration v4" application.
4. The error "Service Unavailable" got vanished.
But encountered new problem - .css and images are not loading.
5. I re run "Product Configuration wizard" with below steps:-
A) Do not disconnect from this server.
B) No, this machine will continue to host the website
Still Problem persisting.
What tried:-
1. Resetting IIS Server.
2. Restarted SharePoint Admin Services from "Service window".
3. Recycled App pool.
Just do let me know for further information.
I have Checked so may forum and sites but no solution :(
Looking for excellent resolution :)

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, however when I touch them, they do not load and bounce back to the main screen. Any suggestions on how to fix?

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, but when you touch them, they do not open and bounce back to the main screen. Any ideas on how to fix?

Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

I play pogo gams and they are not loading im always having trouble with firefox

every time i try to play my pogo games the games are not loading and i keep losing my interent connection. why do i always have trouble with firefox this is getting very annoying
since i pay to play pogo games

how can this be fixed

Ipod touch 4 and iTunes are not Friends

I have a gen 4 iPod touch (64 gig), and for some reason, all of a sudden and without warning it will not back up or properly sync to iTunes. I can’t determine if the problem is the iPod or the computer.
I have a Gateway laptop running Windows 7 as the o/s. I have completed virus checks and malware checks with no issues.
When the iPod is not connected and I start iTunes it will not load the iStore (no error message), but everything will function. Once I connect my iPod it’s like everything goes into slow motion, and the sync times out. I am running iTunes 10.5.1. The iPod is on the previous version, but cannot update it because it times out.
I have tried to uninstall iTunes (and all apple software) and re-install it. I have even tried to install iTunes 10.3.1 and try to sync it, but I get a prompt that the library is of a newer version and is not compatible.
I have tried to reset the iPod to its original settings without any true success.
For some reason and this may sound crazy, but once I uninstalled iTunes it seemed to me that my whole computer increased in speed.
I would say that maybe the problem was a firewall issue, but I run AVG freeware (and the standard Windows security) and I do not see any sections with a list of software that has connection limitations.
Any thoughts?

Ok, I have determined that it is iTunes and not the device, because I connected an iPad to iTunes with the same reaction. This in combination with the fact that iTunes will not bring up the iStore with or without a device attached.
I have turned off the AVG, and the O/S security to see if that might free the connection but it proved ineffectual.
I have tried uninstalling all Apple products again and reinstalling but this has not worked either.
Is there anything I have not tried? I would hate to have to format…

Windows and iTunes are not recognizing my iPod touch 4g

ok my ipod touch was jailbroken and it was a tethered jailbrake b4 it used to connect to my PC and my itunes with no issues but than my friend got me a AC adapter and i didn't use to charge my ipod on my PC anymore only if i needed some songs and stuff to add to it but than i ran out of bettery and i had to connect it so i can do the boot tethered and it never shows up at all and this took me already 2 days trying to get it fixed and still not workinh please someone help me fix this problem and if i have question: If i take it to apple store are they gonna fix it for me ? because its jailbroken and it does not connect to pc to run boot tethered . can they atleast restore it for me in the store becuase i will have no problem if it turns back on as long as i got the ac adapter pls heLP

Apple will not help you fix your jailbroken iPod. Have you tried to place he iPod in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

BPC 7.5: Node ID and description are not loading

Hi,
I'm working on BPC 7.5 and SP04.
I'm working on BPC 7.5 and SP04.
I have G/L account hierarchy in BI system. I tried to load G/L account master data attr/text into BPC and successfully loaded but hierarchy node ID's and description are missed. I followed the below steps.
1) Loaded master attr,text and hierarchy data from ECC to BI and activated the master data.
2) Used the below transformation and conversion file.
3) Selected the hierarchy in selecetion in data package while loading data into BPC.
Transformation File:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF = 177000
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=*MAPPING
*MAPPING
ID=ID
*CONVERSION
ID=ACCT_ID_MD.xls
G/L Account compounded to chart of accounts (10+4) and has total length 14 and hierarchy node ID's have length 32.
I used the below conversion file.
External                                                         Internal
01000000??????                               ??????
0100000???????                               ???????
010000????????                               ????????
0000000000000000000000000000????         ????
000000000000000000000000000?????         ?????
00000000000000000000000000??????         ??????
0000000000000000000000000???????         ???????
*                                                      js:%external%;
Please suggest anyone how can I load node ID's and description.
Note: I followed the same above process for 0PROFIT_CTR and 0COSTCETER and successfully loaded master, text and hierarchy data.
Thanks
Prasad

Hi,
Use the below code in CMOD and change the hierarchy name.
*& Include           ZXRSAU04
CASE i_datasource.
Global Declaration *********
FIELD-SYMBOLS: <FOLDERT> TYPE ROSFOLDERT,
               <HIENODE> TYPE ROSHIENODE.
CONSTANTS : C_NODE VALUE 'C'.
**Enhancement will be used to suffix Z to all cost center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0COSTCENTER_0101_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
   IF <HIENODE>-IOBJNM = '0HIER_NODE'.
   CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
   ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
**Enhancement will be used to suffix Z to all profit center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0PROFIT_CTR_0106_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
   IF <HIENODE>-IOBJNM = '0HIER_NODE'.
   CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
   ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
ENDCASE.
Thanks
Prasad

Thumbnails and comments are not loading on youtube

Since I updated my mac book air to Yosemite everytime I go on youtube the thumbnails don't show at all and the comments never load, I don't know what is the problem. I've checked adobe flash to see if its updated and everything. Please help.

Welcome to the Apple Community.
Contacts
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.
Calendars
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

HT1349 my icloud and itune are not syn icloud is asking me for a different users name and password than itune i am lost and loosing info what can i do to syn itune and icloud .

what can i do to syn my icloud and itune to one account?. In which i would only need one username and password.
When i had setup icloud before i had to use a different email and password and now i can not retrieve nor update
my account, it keeps telling me that my username and password is incorrect.

Sign in with the correct user name and password for the iCloud account.
This has nothing to do with them being "in sync".
iCloud and iTunes accounts, which are simply Apple ID's, cannot be merged. There is no way to merge Apple ID's. If you chose to set up the device using one Apple ID for iTunes and another for iCloud, then that's the way it is.
Alternatively, you could sign into iCloud with the same ID that is used for iTunes. Whether this creates problems or not depends on how you currently have iCloud set up.

Iphoto and itunes are not loading in idvd

Similar Messages

Maybe you are looking for