Iphoto and mavericks installation error?

I had iphoto and then my mac was wiped and had mavericks installed after "software errors" were detected. Now I don't have iphoto and the ap store says it will cost 15.99 to download...? I thought iphoto was standard with mac?

The OS installer doesn't include iWork or iLife applications. When you disk was erased, it removed iPhoto. Do you have a backup you can restore from?

Similar Messages

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Labview 2009 x32 and x64 installation error on windows 7 x64

When attempting to install the evaluation version of labview installed by clicking the try labview for free link on ni.com, I am experiencing an installation error.
the full error is shown in the attachment below, and is as follows;
The NI VC2005MSMs x64 installation has failed with the following error.
Error 1935. An error occured during the installation of assembly 'policy.8.0.Microsoft.VC80.OpenMP, type="win32_policy",version="8.0.50727.762".publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information.
processor is an INTEL core 2 duo
running windows 7 x64
The above error occurs with both 32 and 64 bit versions. I belive I have installed this version of labview on this computer before.
Thanks
David
Solved!
Go to Solution.
Attachments:
labview_error.jpg ‏48 KB

Why Does My LabVIEW Installation Fail With Error 1935?
Also see this discussion

IPhoto and Mavericks help??

I just upgraded to Mavericks from Snow Leapard and also upgraded to iPhoto 9.5.1. I installed the Library upgrader as suggested in the dialogue box when i tried to open iPhoto, but every time i try and open iPhoto I keep getting that same message. Admittedly I am not super savvy at this bussiness... Help?

If your previous iPhoto version was 7 or earlier you need to RUN the upgrader application on the library before iPhoto 9.5.1 can open it. Go to the Applications/Utilities folder, launch the upgrader, select your library and let it do it's thing. Then launch iPhoto and try again.
OT

We have iPhoto and Mavericks - Cannot play video and get error (OSStatus error -54). Have run permissions and rebuilt iphoto database.. This is most valuable 3 minute movie file I have... Help

Has anyone a clue how I can save myself from losing most valuable video clip I have ever taken.? Have a fully up to date Macbbok pro retina and most recent iPhoto. Had 55,000 pictures and a few videos in iTunes database. Just a few months ago also installed iCloud. Now find my London Big Ben Fireworks shot of fireworks at midnight coming from clock just returns -54 error when I click it to play. Did a rebuild and permissions attempt at fixing without success. The front picture of start of video shows at start of pictures but only error box now pops up.
I had a time machine backup that goes back some months and a old computer it may have been on but have not found it yet.
I do not want to risk losing anything. We are just finishing cruise of England and Med on our small boat-home and do not want to lose photos of our memories. Thought they were safe since in iTunes and backed up to TIME machine, and now learn they cannot be pulled out separately... Can anyone help us?
Thanks. I am grateful for any help or ideas while we float out the winter here in England before trying to sail back to America next year.
Happy Holidays.

I could not find the original file.
I did find a file folder named MASTERS.
I did click down in it to where all the other original files seem to be listed in order.
They are listed in files showing (name); (date modified); (date created); (size); (kind); and (date added)
There is a symbol showing each file type, with one file type for photos and a separate symbol showing the movies before each file.
All of them that are showing properly are listed in order with their name sequentially, ie:
DSCN4738.JPG
DSCN4739.JPG
DSCN4740.JPG
DSCN4742.MOV
DSCN4743.MOV
DSCN4744.MOV
My valuable movie that now won't play is shown in iPhoto viewing page listing labeled DSCN4741.MOV
I think I find it later...
OUT OF SEQUENCE APPROXIMATELY 14 files later I show the file that is shown on the listing info when viewing now named
New Years Eve Fireworks.MOV 1/1/12 Jan 1, 2012, 12:58 AM 258.1MB QuickTime file Feb 21, 2013, 3:46 PM
NOTE: The creation time is exactly where it should be in sequence but camera taken with was off an hour
Also, all files in list show the Feb 21, 2013 date - which is date Apple Store migrated my old computers files, which would have included my iPhoto library from my old MACBOOK PRO to the new one.
I do now remember that in past I had played some of the files from the computer by clicking on them directly in the early hours of the morning - showing some of them to a friend - while messing around demoing this MacBk Pro Retina...
Though I do not have a clear recall of it recall earlier having a hard time finding this file. I am now certain - based on the circumstantial evidence - I must have changed the name from DSCN4741.MOV to the name shown at the first line of the listing two paragraphs up.
Now my quandary is how do I escape this mess I made for myself and restore it. I clearly am -- despite being 68 -- being more of a "script kiddie" than a "hacker", but not a competent one of either!
Thanks for your help in analyzing this Terence, and hope you can help me fix my screwing it up. Ed

Problems with iPhoto after Maverick installation

After 'free' :-) installation of Mavericks, iPhoto doesn't work...
When I take a look in the App Store I recognized
that It isn't possible to update my Version of iPhoto..?
I bought iPhoto two years ago and I'll not buy it again - the same programm.
I need help!
Chris

This is the current message:
The Photo library needs to be upgraded to work with this version of iPhoto.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

DTM 6.0 sync error 2753 and windows installer errors, please help

I have tried install and uninstall over 5 times with the same errors
, this is what happens when i install
when i start to install DTM 6 on Win7 64bit, first message i get says.
Windows Installer, Pending Microsoft Visual C++ 2008 Redistributable, it tried to install this but then says failed to install even though its already installed, therefore i cancel this carry on with the install which completes.
Now when i run the application and click on back up, i get a box saying The error message says, " The feature you are trying to use is on a network resource that is unavailable". It is looking for the Apploader.msi file in the C:\Documents and Settings\user\Application Data\Research In Motion\BlackBerry\ directory.. i have tried looking for Apploader.msi but it does not exist so i have to cancel, if i keep pressing cancel it does eventually backup. but i can not sync as every time i try to setup the sync config setting i get a error message. error 2753 The file MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation
I have tried searching the web but no one can help, Like you say what the point if i can't sync.
Please if anyone can help fix this, i would regard them as genius
Solved!
Go to Solution.

Hi beeman,
Try clean uninstalling then reinstalling the Blackberry Desktop Software 6.0 following this KB article. http://bbry.lv/da1SoE
Hope this helps,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies

Hi ,
My environment is
AIX 6.1
oracle 10.2.0.2
ECC 6.0 SR3
i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
instance is not coming up and all the process are starting and and then again die one by one.
In trace of all wor processess , i can see the error trace as follows:
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
M
M Modeinfo for User T16/M0
Full trace for work process is
trc file: "dev_w16", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        DMB
M systemid   324 (IBM RS/6000 with AIX)
M relno      7000
M patchlevel 0
M patchno    144
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        790666
M
M
M Tue Jan 6 15:41:58 2009
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c   1281]
M ThInit: running on host MBDEVECC
M calling db_connect ...
C Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
C Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090106 154158 MBDEVECC
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 6 15:42:00 2009
I MtxInit: 16 0 0
M SHM_PRES_BUF               (addr: 0x7000000057a0000, size: 4400000)
M SHM_ROLL_AREA          (addr: 0x700000140000000, size: 134217728)
M SHM_PAGING_AREA          (addr: 0x700000150000000, size: 67108864)
M SHM_ROLL_ADM               (addr: 0x700000005bd4000, size: 2672386)
M SHM_PAGING_ADM          (addr: 0x700000160000000, size: 656416)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000170002000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 11776 bytes (50 server) at 0x700000180000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 16 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B db_con_shm_ini: WP_ID = 16, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
B dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
B dbexpbuf: Buffer ESM   (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
B dbexpbuf: Buffer CUA   (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
B dbexpbuf: Buffer OTR   (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 6 15:42:01 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x113a30700
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 0x7000001e0000000, size 300000K)
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = unlimited
=> Stack limit     = 4294967296
=> Core limit      = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x113afcb80
=> Stack address = 0xfffffffffffdd60
=> Stack low     = 0xfffffffffffb470
=> Stack high    = 0xffffffffffff7c0
=> Stack Trace:
     pthread_kill() at 0x9000000005b9450
     praise() at 0x9000000005b8cac
     raise() at 0x90000000002b0f0
     abort() at 0x900000000094528
     ab_init() at 0x1002038d0
     ThrInitRunTime() at 0x1003d1864
     ThStartUp2() at 0x101a9caf0
     ThInit() at 0x1000e9678
     ThStart() at 0x1000fe1b0
     DpMain() at 0x10156c770
     nlsui_main() at 0x101a99998
=> CPU Registers:
     msr = 0xa00000000000d032     iar = 0x09000000005b9450
     ctr = 0xffffffff000000bc      lr = 0xffffffffffffffff
     xer = 0x00000000ffffffff      cr = 0x0000000000585000
     r00 = 0xffffffffffffffff     r01 = 0x0fffffffffffdd60
     r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
     r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
     r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
     r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
     r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
     r12 = 0xffffffffffffffff     r13 = 0x0000000112d77bd8
     r14 = 0x0000000110cf5dd8     r15 = 0x0000000110028718
     r16 = 0x0000000110001ee8     r17 = 0x0000000000000000
     r18 = 0x0000000000000000     r19 = 0x0000000110027538
     r20 = 0x0000000110572f50     r21 = 0x0000000110572fb0
     r22 = 0x0000000110572f98     r23 = 0x0000000110572f80
     r24 = 0x0000000110573610     r25 = 0x0000000110000e40
     r26 = 0x00000001105737c0     r27 = 0x0000000101baa950
     r28 = 0x0000000112d6fe50     r29 = 0x0000000000000006
     r30 = 0x0000000000000006     r31 = 0x0000000000000001
M ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c      935]
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 16
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_VB2WP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = 16
M    mode = 0
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M Modeinfo for User T16/M0
M
M    tm state = 2
M    uid = 17
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >   <
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    its_plugin = NO
M    allowCreateMode = YES
M    blockSoftCanel = NO
M    session_id = >                                <
M    ext_session_id = >                                <
M    imode = 0
M    mode state = 0x41
M    mode clean_state = 1
M    task_type = 0
M    lastThFc = THFCINVA
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 11
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 8
M    roll state = 1
M    abap state = 1
M    em state = 3
M    eg state = 1
M    spa state = 1
M    enq state = 0
M    softcancel = 0
M    cancelInitiator = ?
M    clean_state = DP_DEFAULT_CLEANING
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    msg_count = 0
M    tcode = >                    <
M    last_wp = -1
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 0x700000030532aa8
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
M
M Modeinfo for User T16/M0
M
M    tm state = 2
M    uid = 17
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >   <
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    its_plugin = NO
M    allowCreateMode = YES
M    blockSoftCanel = NO
M    session_id = >                                <
M    ext_session_id = >                                <
M    imode = 0
M    mode state = 0x41
M    mode clean_state = 1
M    task_type = 0
M    lastThFc = THFCINVA
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 11
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 8
M    roll state = 1
M    abap state = 1
M    em state = 2
M    eg state = 1
M    spa state = 1
M    enq state = 0
M    softcancel = 0
M    cancelInitiator = ?
M    clean_state = DP_DEFAULT_CLEANING
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    msg_count = 0
M    tcode = >                    <
M    last_wp = -1
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 0x700000030532aa8
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M
M ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c   260]
Can some one please help me.
Regards
Saurabh

This looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
Hope that is helpful.
J. Haynes

Photoshop Elements 4 and 3 installation error

In 2006 I bought a wacom graphire 4 tablet including photoshop elements 4 and 3. Recently I replaced my Mac (new Mac: OS X version 10.8.4 - 2.9 GHz Intel Core 15 - 8 GB 1600 MHz DDR3) and now I want to install photoshop elements 4 and 3 again, and when the installation is almost finished I get an error. Please help me to install photoshop elements 4 and 3 to my new Mac.

Well, you should have known that if you upgraded to mountain lion you would lose all your ppc software. Apple has been warning that this was coming since around 2006 and PSE 3 stopped being compatible with OS X back around 10.4, after all. 10.7 has been out for over two years now, so it's not like this has been a big secret.

BOE XI R3.1 and DB2 - Installation Error

Hi,
I am facing an error when installing BOE XI R3.1 in Windows Server 2003, with DB2 as database.
The error message:
Fail to validate the database information
CMS database error: STW00226
Database access error. Reason Loading shared object failed. First tried to load library db2app and failed because of error: [The specified module could not be found.
]. Second tried to load library db2app.dll and failed because of error: [The specified module could not be found.
Would much appreciate some advices on how to solve this error.
Thanks and Regards,
Yann

Hi;
please make sure that your DB2 environment is correctly set up, particularly I think the PATH environment variable should contain the folder where this db2app.dll library seats (somewhere in the DB2 client installation folder I guess).
Regards;
Lionel

RHEL 4, 10g and OCFS2 Installation Error: mkfs.ocfs2

Hello,
I am working on the a Oracle RAC installation and I am getting an strange error
while installing OCFS2. The error I am getting occurs while performing a mkfs.ocfs2 (See details below).
This is the command and error I am getting:
Command: # mkfs.ocfs2 -b 4K -C 32K -N 4 -L oradatafiles /dev/sda1
Error: Writing system files: mkfs.ocfs2: Could not write: Input/output error
Can some give me the origin of the error?
Thanks,
Fritz
[email protected]
+++++++++++++++++++++ D E T A I L S ++++++++++++++++++++++
# uname -a
Linux gam-db-p-01 2.6.9-22.0.1.ELsmp #1 SMP
Tue Oct 18 18:39:02 EDT 2005 x86_64 x86_64
x86_64 GNU/Linux
# fdisk -l
Disk /dev/cciss/c0d0: 72.8 GB, 72833679360 bytes
255 heads, 63 sectors/track, 8854 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 8854 71015332+ 8e Linux LVM
Disk /dev/sda: 21.5 GB, 21512585216 bytes
64 heads, 32 sectors/track, 20516 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 20516 21008368 83 Linux
Disk /dev/sdb: 21.5 GB, 21512585216 bytes
64 heads, 32 sectors/track, 20516 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 20516 21008368 83 Linux
# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Not active
# mkfs.ocfs2 -b 4K -C 32K -N 4 -L oradatafiles /dev/sda1
mkfs.ocfs2 1.0.3
Filesystem label=oradatafiles
Block size=4096 (bits=12)
Cluster size=32768 (bits=15)
Volume size=21512568832 (656511 clusters) (5252088 blocks)
21 cluster groups (tail covers 11391 clusters, rest cover 32256 clusters)
Journal size=33554432
Initial number of node slots: 4
Creating bitmaps: done
Initializing superblock: done
Writing system files: mkfs.ocfs2: Could not write: Input/output error

Hi,
I'm getting the same problem. My RAC nodes are actually virtual machines created with MS Virtual Server, and the ocfs2 disk is a shared SCSI virtual hard disk.
I'm getting the "Could not write: Input/output error" message when creating a ocfs2 partition.
Any suggestions would be appreciated.
Thanks,
Thom

RHEL 4, 10g and OCFS2 Installation Error

Hello,
I am working on the a Oracle RAC installation and I am getting an strange error
while installing OCFS2. The error I am getting occurs while performing a mkfs.ocfs2 (See details below).
This is the command and error I am getting:
Command: # mkfs.ocfs2 -b 4K -C 32K -N 4 -L oradatafiles /dev/sda1
Error: Writing system files: mkfs.ocfs2: Could not write: Input/output error
Can some give me the origin of the error?
Thanks,
Fritz
[email protected]
+++++++++++++++++++++ D E T A I L S ++++++++++++++++++++++
# uname -a
Linux gam-db-p-01 2.6.9-22.0.1.ELsmp #1 SMP
Tue Oct 18 18:39:02 EDT 2005 x86_64 x86_64
x86_64 GNU/Linux
# fdisk -l
Disk /dev/cciss/c0d0: 72.8 GB, 72833679360 bytes
255 heads, 63 sectors/track, 8854 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 8854 71015332+ 8e Linux LVM
Disk /dev/sda: 21.5 GB, 21512585216 bytes
64 heads, 32 sectors/track, 20516 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 20516 21008368 83 Linux
Disk /dev/sdb: 21.5 GB, 21512585216 bytes
64 heads, 32 sectors/track, 20516 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 20516 21008368 83 Linux
# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Not active
# mkfs.ocfs2 -b 4K -C 32K -N 4 -L oradatafiles /dev/sda1
mkfs.ocfs2 1.0.3
Filesystem label=oradatafiles
Block size=4096 (bits=12)
Cluster size=32768 (bits=15)
Volume size=21512568832 (656511 clusters) (5252088 blocks)
21 cluster groups (tail covers 11391 clusters, rest cover 32256 clusters)
Journal size=33554432
Initial number of node slots: 4
Creating bitmaps: done
Initializing superblock: done
Writing system files: mkfs.ocfs2: Could not write: Input/output error

Hi,
I'm getting the same problem. My RAC nodes are actually virtual machines created with MS Virtual Server, and the ocfs2 disk is a shared SCSI virtual hard disk.
I'm getting the "Could not write: Input/output error" message when creating a ocfs2 partition.
Any suggestions would be appreciated.
Thanks,
Thom

Tiger and Panther installation error

Hi,Im new to this forum,nice to meet you all
i really hope that my problem can solve it here..
Since a week a go, my Mac was on panther10.3 had some software crashs, so i decided to re-install my OS from an 10.3 installation disk which came belong my G5, but each time it just pop up a window said"there were error during install the software,please restart and try again"
and i keep running the installation again,but it keep pop up the error, then i read some thread here and leart to run fysk test,PVRAM reset and finally I errase all my hardisk files,but it still stay the same...
then yesterday i ran to puchase OSX tiger...but it didn't solve me any problem,it was still error while installing, i read some thread said it may cause by 3rd-party ram, but it should not the problem,cause i didn't add any in it, then i ran the AHT test from my 10.3 disk, it said there was error on my memory part, and i assume it is my ram problem.....
its really frustrate me...
is that mean that my ram is over?
do i need to buy new ram?
or is there any things I can reset my ram?
what should i do now?
Thank you for your kindly help.......
My Mac spec:
G5 powermac Dual 1.8g
512ram
DVD-rw
160G hard disk
G5 Mac OS X (10.4)

Hi HKBU;
Before I can answer the question about fixing it, you will have to tell me more about your system like how much RAM do you have and how many memory cards are installed.
If you have additional memory cards you might be able to remove some and then run AHT again to see if the error is gone.
If all you have is the original memory, you will have to run either memtest or rember which will return an error message pointing to the bad memory card.
Allan

Installation Error ECC6.0 + Oracle 10202+ Suse Linux 10 ( 64 bit )

Hi all,
We are installing ECC 6.0 with Oracle 10202 on Suse Linux 10 ( 64 bit ) machine.
We are facing error in the Import ABAP phase.
Below is the error:
Import Monitor jobs: running 1, waiting 1, completed 35, failed 0, total 37.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 35, failed 1, total 37.
ERROR 2008-02-25 23:56:45
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-25 23:56:45
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
We stopped the installation and restarted the database, but its didnt worked.
Any ideas in resolving the error ...!
Kind Regards
Neenad

Hi all,
error lines - th_act_em_hdl
It is a problem with time zone .. current time zone is zzz & changed to AST (Arabic standard time).
Re: ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
-rahul
Edited by: Rahul on Nov 26, 2009 10:43 AM

BIG PROBLEMS WITH IPHOTO AFTER MAVERICKS DOWNLOAD

Hi! I´ve read all about iPhoto and mavericks problem on diferent questions and answers around Communities and done every one of the suggestions and still can't fix it, I´vd already erased iPhoto (hoping my photos are alive, if not im dead!!!) so that I buy anew the app but I can't it just simply says "accept" but can't buy it. What can I do plis help believe me I tried EVERYTHING. FYI, my iPhoto came with my Mac Book Pro since new. Pleeeeeaaaaseeee help me I really need to recover my photos and work on the app. Thank you very much

I have the same problem since I "upgraded" to OS X Maverics. I can't open iPhoto, because it says my version is old (version 9.2.1.). When I try to download the update, it tells me my iPhoto was purchased with a differed Apple ID (it already came with my MacBook Pro bought last year!!) and need to update under the same Apple ID (?). This is very frustrating!!

Iphoto and mavericks installation error?

Similar Messages

Maybe you are looking for