IPhoto camera downloading not working in LION.
Since downloading OSX Lion my Kodak camera pictures will not download to IPhoto. All I get is a square block where the photo should be and a not recognized. nothing has changed since before adding the new OSX lion.
An help would be much appreciated .
I have the same problem, best workaround is to use a USB card reader rather than connecting camera directly.
It is irritating, especially as exactly the same thing happened when I upgraded to iPhoto '11 on Snow Leopard. Apple eventually released an update that sorted that out, so they'll probably get round to it at some point this time.
I haven't bothered to try this time, but when I had the issue after upgrading to iPhoto '11, I found it only caused a problem if you had video files on the memory card, seemed to work fine when it was just photos. So maybe that will also be the case this time.
Similar Messages
-
IPhoto 9.1.5 slideshow is not working on lion
Hi,
my iPhoto 9.1.5 is not working on lion. I have upgraded from Snow Leopard to Lion. If i click on slideshow then it seems to be started with full screen but it return back without slideshow.
Waiting for any clew.
MoshiourFor iPhoto 9.1.5:
http://support.apple.com/kb/HT4754
Regards,
Colin R. -
Hi Apple,
Can you tell me if there's a reason for my camera not working on my iphone 5.
Soon after downloading ios7 , the camera's front picture has frozen and shows
blurred picture . The app itself is frozen also , can't bring up photos from photo album .
Also I reset the phone and still the camera is not working .
please advise me as what to do next .
Regards.
Reggie.Hi Patoraffo,
I understand that you are having issues with the Camera app functioning, I found the following information that may provide a resolution:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera is not functioning
- If the screen shows a closed lens or black image, force quit the Camera app.
- If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
- Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
- Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
- Try turning iPhone off and then back on.
- Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
- Try to remain steady while focusing:
- Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
- Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
- If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks,
Matt M. -
Hi,
I have a late 2008 version of the MacBook Pro. I just installed Lion, my camera is not working. It says there is no camera connected. I used my camera a lot with snow leapord. I don't know what the issue is. Let me know if you can help?After trying -what seemed like everything- on the software side of things, I went into the Apple store. The genius Bar person then ran through all of the same things without fixing it so he concluded it had to be hardware. We both agreed that since it was working before, hardware shouldn't be the problem but he was out of solutions. They replaced my entire screen module and camera. I don't know what else they reset in doing the hardware change but now the camera works again. I still find it hard to believe it was actually a hardware issue. Especially with all who are having the same issue. I'm guessing it had something more to do with some reset they did when the hardware was changed since my clock was off and my settings were different. By the way, this would have been a $310 charge but I was under warranty. whew!
-
My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My cam dose not working since i download ios6.1.3
My cam dose not working since i download ios6.1.3
My cam dose not working since i download ios6.1.3
-
The zoom in the cam its not working after downloading IOs5
HI
after downloading after IOS5 software the zoom of the cam its not working and also the option of opening the cam from the lock screen also not avilableOnce you see the lock screen, you have to double-click the home button to access more controls.
Not sure about the zoom. It works for me :/ -
IMac 27': iSight camera is not working but it is recognized in Utilities
My iSight camera is not working. I'm sure it is not a hardware problem, because when I reinstalled MacOs Lion it worked for some time. I'm sure is a software problem. When I run FaceTime appears the message that "No camera is connected", also in Photo Booth is not working.
(1) First, be sure connections and other issues from
here are eliminated as possible problem causes:
• http://support.apple.com/kb/TS2400
• http://support.apple.com/kb/TS3544
(2) Then, if Apple's http://support.apple.com/kb/HT2090
suggestions do not help you, (the "reset" suggested there
often restores normal function,) continue with the following.
(3) Use Disk Utility to repair permissions and then
download and apply the 10.7.2 Combo Update:
http://support.apple.com/kb/DL1459
(4) Repair permissions again immediately following the
system restart that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct problems like yours.
Message was edited by: EZ Jim -
Web-Cam does not work on Lenovo G480, PLEAS HELP!!
Hello,
I have a Lenovo G480 (20165), and my built-in Web-Cam is not working.
When I enable it by pressing Fn+Esc the little light by the Web-Cam turns on, then shuts off after a second.
So I downloaded the Lenovo Easy Capture, and when I open the software, I get a message saying "Failed To Open Camera".
And when I turn on my laptop, the little light comes on for a short moment, then the light shuts off.
I don't know what to do, It's a brand-new laptop and I've never been able to get the Web-Cam to work, not even on Skype.
I would REALLY appreciate the help. Thank you!Have you installed camera drivers from the us support site? Try reinstalling them
Win 7
http://download.lenovo.com/consumer/mobiles/0qca12ww.exe
http://download.lenovo.com/consumer/mobiles/0lca12ww.exe
Win 8
http://download.lenovo.com/consumer/mobiles/0qca08w8.exe
http://download.lenovo.com/consumer/mobiles/0lca11w8.exe
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it. -
Camera is not working for Skype in Mac OS Maverics
Hi,
I have MacBook Pro (Mid 2012). I have updated it to MAC OS Maverics.
Since then camera is not working for Skype (Version 6.8.0.351)- only at the start it works for few seconds and then it freezes.
It was working fine with Mac OS Lion.
Please suggest some wayout from this.Shirsendu wrote: ... not working for Skype (Version 6.8.0.351....
Install Skype Update: Skype_6.9.0.517
Message was edited by: EZ Jim
Mac OSX 10.9 -
Lumia 920 Camera App not working with 8.1
Hi there, Just had the Cyan update. Camera app just shows black screen, both for video and camera.
Did soft reboot, hard reset, etc. Took to repair shop and they installed new camera. Not working
They did a reinstall back to factory and still no joy.
Nokia Lumia 920
Carrier At&T
Windows 8.1
OS 8.10.12393.890
Please help?!RobRoy_cro wrote:
Hi..i have same problem then i make nokia pro cam as default and turn off "more tile" in settings and now everything works
I hope this help
Thanks. Only had microsoft camera, so downloaded the Nokia Camera. Could not find a "nokia pro cam"
Also where in settings is the "more tile" option?
Nokia camera now is just the black screen, no options. -
Satellite M645-S4050: built in camera does not work correctly
My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this. -
My new iPad air is not working the yahoo messenger video call pls help thanks
Hello Evaorange
If you are having an issue with the app downloaded form the App Store, check out the general troubleshooting article below to resolve the issue. If the camera is not working in that app, check other apps to see if the camera is working besides in that app.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G. -
my isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks
Try zapping the PRAM. See KB Article http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it. -
PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?
Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.
Maybe you are looking for
-
How many times can I install my CD LR4 ?
Hi I have LR4 in CD but the past few months, I have the Creative Cloud. I installed the LR5 from my CC, but I want to uninstall the LR4. Could I possibly reinstall? Thank you
-
Help needed in retrieving parent child relationship values
Hi, I have a requirement to get parent child relationship values as below. Ex: Address table cont cont_code state state_code C1 10 S1 1 C1 10 S2 2 C1 10 S3 3 C2 20 S4 4 C2 20 S5 5 C3 30 S6 6 C3 30 S7 7 C3 30 S8 8 I want a result of country/state and
-
How do I convert a booklet PDF to normal A4 PDF?
Hi, We have certain reports that come from a third-party as Booklet PDFs and need to convert them to normal A4 size PDFs before publishing them. Can anyone tell us how to do this? 1. How to do it individually? and 2. Is there a script or something th
-
on my itunes all of a sudden on the left side under 'shared' it says 'abdulmalek fahad' and it has an eject button but when i press it nothing happens. who is this abdulmalek fahad and how do i get rid of this from my itunes
-
Table CI_EEW_CMG_CAT_ATTR_LIS can't be created with package ZZCRM
Hi, I am trying to add an attribute to category object through EEWB. However, when i complete the EEWB wizard, I get the below error. "Table CI_EEW_CMG_CAT_ATTR_LIS can't be created with package ZZCRM." I have verified the setting so of the packag