IPhoto can't import from CF card

Hi,
today when trying to import some photos from my kids rugby game, iPhoto can't import several of them. In total there are 51 photos on the newly formatted CF card and 5 of them doesn't even have a thumbnail picture, and even more of them can get imported to iPhoto. I get a kind of nonsense error message telling me that iPhoto can't import a picture because it can't get recieved or something similar. If I use Image Capture I get 38 of them imported.
I really want to save these photos, what can I do?
And what has happened, is it the memory card that is bad? I sure must prevent this from occuring again in the future.
Thanks...
/Mans

Are you importing via a card reader or are you plugging the camera directly into the computer?
My suggestion is if you are using a card reader, you may want to go through the camera instead if you can to see if the camera is better able to hand off the photos to the Mac.
But it sounds more like a card issue if you have problems outside of iPhoto like when trying to use Image Capture.
Patrick

Similar Messages

Iphoto crashes when importing from SD card

I found similar discussions but no solution.
I am using snow leopard with Iphoto. I never had any problems but now I am not able to import pictures into the library. Iphoto crashes whenever I am trying to import from an SD card. I need to restart the computer to be able to use Iphoto again. Is there a limit of the library size? I read something about 250000 pictures but I am far away from this number. What might be the problem?

Hi Terence,
here is the first part of the crash report:
Date/Time:
2012-05-23 08:12:54 +0200
OS Version:
10.6.8 (Build 10K549)
Architecture:
i386
Report Version: 7
Command:
iPhoto
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Version:
9.2.3 (9.2.3)
Build Version:   1
Project Name:
iPhotoProject
Source Version: 629052000000000
Parent:
launchd [108]
PID:
351
Event:
hang
Duration:
12.62s (sampling started after 2 seconds)
Steps:
87 (100ms sampling interval)
Pageins:
41
Pageouts:
0
Process:
iPhoto [351]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
UID:
501
Thread 1adf
DispatchQueue 1
User stack:
87 ??? (in iPhoto + 63065) [0x10659]
87 ??? (in iPhoto + 65994) [0x111ca]
87 NSApplicationMain + 574 (in AppKit) [0x963d9289]
87 -[NSApplication run] + 821 (in AppKit) [0x963e11f3]
87 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156 (in AppKit) [0x9641edd6]
87 _DPSNextEvent + 847 (in AppKit) [0x9641f595]
87 BlockUntilNextEventMatchingListInMode + 81 (in HIToolbox) [0x919b2a3e]
87 ReceiveNextEventCommon + 354 (in HIToolbox) [0x919b2bb9]
87 RunCurrentEventLoopInMode + 392 (in HIToolbox) [0x919b2e04]
87 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x99dad1f1]
87 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x99dad3c4]
87 __CFRunLoopRun + 1071 (in CoreFoundation) [0x99dadeef]
87 __CFRunLoopDoSources0 + 1563 (in CoreFoundation) [0x99db042b]
87 __NSThreadPerformPerform + 506 (in Foundation) [0x90d31671]
87 -[RKInvoker _invokeTarget:] + 33 (in RedRock) [0x1d7b8d1]
87 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x99deae18]
87 __invoking___ + 29 (in CoreFoundation) [0x99deaead]
87 ??? (in iPhoto + 2737120) [0x29d3e0]
87 ??? (in iPhoto + 569871) [0x8c20f]
87 ??? (in iPhoto + 570330) [0x8c3da]
87 ICACopyObjectPropertyDictionary + 117 (in ImageCapture) [0x9a60d396]
87 ICACommand::ProcessCommand() + 76 (in ImageCapture) [0x9a60a4e4]
87 ICACommand::SendSync() + 65 (in ImageCapture) [0x9a60a983]
87 ICAAESendMessage + 161 (in ImageCapture) [0x9a61505a]
87 AESendMessage + 4302 (in AE) [0x9a11e1c6]
87 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x99dad1f1]
87 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x99dad3c4]
87 __CFRunLoopRun + 2079 (in CoreFoundation) [0x99dae2df]
87 mach_msg_trap + 10 (in libSystem.B.dylib) [0x95a84afa]
Kernel stack:
87 ipc_mqueue_receive_continue + 0 [0x210d84]
Thanks

Can't import from SD Card

My i-Mac, running OSX 10.5.6 is no longer able to import photo files from my SD cards, into Aperture 2.1.2.
I have tried to import both using a USB connection between camera and computer, and by using a USM card reader.
Interestingly, there is no problem importing images from the same cards into I-Photo. This suggests to me that this is not a hardware problem, but is an Aperture problem.
Any ideas?

If you copied the entire contents (even blank folders) of your SD card, then iMovie should be able to read it.
Choose FILE/IMPORT FROM CAMERA ARCHIVE and navigate to the folder that contains the contents of your card.
Here is a sample of what you should see.

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

No I haven't formatted it, but don't really know how to either? I am a bit of a newbie at this and thought i just had to buy any memory stick and it would work. can you suggest how to format it for FAT32 ( I don't know what this is either ) as I will be using the memory stick for windows also at a later date.
Thanks for your reply

Can't import from Sony XDCAM memory card to FCP 6

I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

Laura,
First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

Confusion re: photostream, import from memory card, events, etc.

confusion re: photostream, import from memory card, events, etc.
Up until a few weeks ago, my travel-photo-handling went like this:
Each night, I download photos to my iPad for safekeeping. They, of course, wind up in Photostream.
When I return home, I connect my camera card to my iMac (where I have my iPhoto library), and I can "see" the photos on my memory card - the photos which, although in Photostream, I have not yet manually downloaded.
I select and ownload them.
New Events are created in my Library automatically, as I have my preference set to Autosplit Events.
This week, I came home from a trip during which I had downloaded to iPad during my time away.
I connected my memory card to the iMac.
iPhoto did not "see" any photos to import - as far as iPhoto was concerned, those photos were already in my Library.
I had iPhoto show all photos on my card, selected the photos from my trip (I shot over 1000) and clicked "Import Selected"
iPhoto says they're duplicates.
However, the photos have NOT been downloaded manually and there are NO Events in my Library for those days.
Note: yeah, they're in Photostream, but IN THE PAST - and I mean literally up until 3 weeks ago - the photos have ALWAYS been "visible" and importable even if in Photostream, as long as I had not yet manually downloaded to the computer.
So my question, I guess, is multi-part:
What changed in iPhoto and/or Photostream in the past couple of weeks?
Why are Photostream photos suddenly considered to be the same as the photos on my card which have not yet been manually downloaded to the computer?
What the heck is going on?
I hate having duplicates, but I also hate being confused by something that used to be really easy, then - with Photosream - became annoying, and is now simply perplexing and sometimes imcomprehendable.

Check iPhoto's Photo Stream preference pane to see if the highlighted checkbox in the screenshot below is checked. If it is then all photos taken by the iPad are automatifdally being imported into your library.
Go the the Events mode and check the View ➙ Sort menu option to verify where new Evens will be located, at the top of the window or the bottom. Then check to see if your PS pictures are there.
As a test launch iPhoto with the Option key held down and create a new, test library. Connect your iPad and import all photos. Dismount the iPad, close and reopen the test library, connect the iPad again and test to see if the same problem persists. Does it?
If it does'nt then your current library is damaged and needs to be repaired.
OT

Can't import from internal SD or external SD to Mac Photos app

I have been using Photos since it was released without any issues except that I can't seem to import from SD cards. Trying to import from either the internal SD slot on my Mac Mini or externally connected card readers fails.
When I choose file, import within Photos and navigate to the SD card source, the "review for import" dialog is grayed out, as are the folders themselves. If I manually navigate to the SD card outside of Photos, I can select the files and choose open with Photos and import like that without issues. My library is on an external drive, if that matters. Any ideas how I can fix this or why its happening?
thanks!

If there is no other way, drag the images to a folder on your desktop and import them from there.
Keep it simple

Import from SD card hanging

New laptop (toshiba qosimo w/20gb ram, ssd and hd), new os (windows 8), new version of lightroom (5.2) new bloatware (toshiba), new problems.
I can usually get one import from sd cards to work per boot in lightroom. when lightroom ejects and a new card is put in (I run several cameras per shoot) it shows the pix thumbnails, correctly identifies the new images and then just hangs on import. the import bar jumps to about 2/3 and stops, even running over night does nothing. At this point trying to use the windows explorer browser to access the sd card also hangs explorer. I can click the close "x" on the import status bar and it does eventually close though I must physically eject the card before the "Import Results" error dialog pops up. I can then re-mount the sd card and manually copy the files into thir dated folders, making new ones as needed, and sync the parent folder in lightroom and continue working but that is very tedious.
I've made sure all bloatware is not indexing, importing, or any other bad behavior. I have tried killing of all apps and background bloatware item by item with no success. Rebooting allows me one additional import but hangs on the second sd card.
While it criples lightroom I doubt it's lightroom's fault. Anyone have any ideas on how to troubleshoot? If it matters I'm using the built-in SDHC card reader which is a realtek pcie unit running the "RiconMan.exe" process. I've even tried killing that and letting it restart with no joy.
Thanks in advance,
Mark
UPDATE:
My third paragraph made me think it could be connected to the built-in reader so I searched around and eventually "borrowed" my wife's USB reader. I was able to do 2 imports on it after the 2nd import on the built in reader had failed. Looks like it's a conflict between realtek's reader and lightroom. I can copy files from several sd cards in explorer so this problem only seems to afflict lightroom.
Message was edited by: Mark4Cambodia

Photos > View > Show Sidebar
YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
You can also make Photos the default app in Image Capture.

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

For future reference, if there is an error message, you should probably quote it in your original message on the subject.
"Could not be read" indicates that you do not have WRITE permission to the destination directory when you try to import, so change your permissions.
"not recognized" might indicate the camera card itself is corrupted or the card reader is failing ... or the problem might go away if you change your permissions.

Can't import from Cannon HV20.

I can't import from my Cannon HV20. The camera does not show up as an external camera. I just get the message "to import video, please connect a camera". I get the same message when connecting to my laptop and I have tried two different firewire cables. I have gone through the settings on the camera and I don't see anything that would prevent it. I have the camera in play mode and powered on. I have successfully imported from this camera many times. This started yesterday when I plugged the camera in while using ichat and ichat crashed. I suspect the firewire connection on the camera is damaged.
Any ideas?

I have the same problem with a different camera.
I have used my Sony TRV27 Handycam in making movies primarily with iMovie 6.0.3 on my former G5. It did record from the camera to iMovie 7.1.4 on my Intel core 2 but now can't get in to import to either program 6.0.3 or 7.1.4. It will not recognize that the camera is attached or switch the camera icon to camera mode. If it does it only shows Built in iSight or Time Lapses.
I prefer to use the older iMovie camera because of the options and familiarity of it. I do not care for the newer iMovie program format.
I went to the system profiler as suggested and found firewire but have no idea what the Firewire Device Tree looks like nor did I see anything on the right except Firewire Bus speed.
I have been using the cord from Sony in the past to import movies. My computer does not show the camera even though in Finder/Preferences connected services are checked to show up on the desk top.
I phoned Apple Care today and got virtually no help. The gentleman kept saying it was the camera that was at fault. Or it was the ? slot in the computer that wasn't working. They both work. I checked. I see by posts a lot of other camera owners are having similar problems.

Can't import from LR 3 to PSE 10

Installed Photoshop Elements 10 and can't import from LR 3 for external editing. Any suggestions? I've already tried deleting the LR and PSE .plist files.

So basically I uninstalled Photoshop Elements 10 trial version. I uninstalled LR4 upgrade version. After reading about all the on line grief that people have been having with LR4, why go there? Sounds like more hype with a wopping side order of hooey. Did the online text conversation with Adobe support person prior to logging on to this forum and his only suggestion was call tech support Monday. Uninstalled and reinstalled LR 3.6. Uninstalled and reinstalled PS CS3. Everything works perfectly like it did before. Why or why did I waste all my time with supposedly compatible upgrades? First time I've really been disappointed with Adobe. Hope it's the last.

Mac Book Pro Version 9.1 - can't close IPhoto, can't import selected new photos

Mac Book Pro Version 9.1 - can't close IPhoto, can't import selected new photos.

Any more ideas? My Mac BookPro won't download all new photos - just a few.
There are many photos it won't recognize.
I need upgrades - my computer won't continue upgrading.
Sheldrake
Edit

IPhoto 9.6 and Image Capture can't import from iPhoto, don't recognize devices or SD cards

I'm running the latest version of Yosemite on a recent MacBook Pro, with iPhoto 9.6. I recently noted when trying to import photos from an SD card that iPhoto didn't recognize the SD card automatically, and ask whether I wanted to import my photos. I was able to manually tell iPhoto to import, and find the photos by navigating to the SD card on the desktop and finding the right directories on it, so I figured it was just a hiccup and went on with my life. But now I've hooked up my iPhone 5S via USB to my Mac, and iPhoto neither recognizes that it's connected nor imports photos from it. Image Capture doesn't recognize it, either.
A few further notes:
- I'm running iOS 8.1 on the phone.
- My phone is unlocked when I'm trying to import photos.
- iTunes 12 can recognize and connect with the phone just fine.
Anyone having similar problems? Is there any help for this issue? Thanks much!

Hello Nathan,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone is not being recognized as a camera on your computer, please follow the directions in the article linked to below.
iOS: Unable to import photos to computer
Take care,
Alex H.

Problems importing from SD card into iphoto

hi there, im trying to import photos from an SD card into iphoto and the "import selected" and "import all" boxes are greyed out... Any ideas why that would be? I can see all my photos and access them in iphoto, i just cant import them... Many thanks!

Just to add - i have just tried uploading photos from my iphone too and the issue is the same... I can view them all in iphoto but i cant import. Very strange.
Any help very much appreciated.
Thanks in advance

IPhoto can't import from CF card

Similar Messages

Maybe you are looking for