Iphoto cannot be installed

i just bought the iLife '08. i could install everything but iphoto. can you please help me?

Something to try:
Go to HD / Library / receipts and remove any pkg file there with iPhoto in the name. (Only iPhoto ones, mind, leave the rest as they are!) Then try again.
Regards
TD

Similar Messages

  • I have tried VERY unsuccessfully to install iphoto 9.2.3 update...it says it has successfully updated - then on opening says: iPhoto cannot be opened because of a problem. Check with the developer to make sure iPhoto works with this version of Mac OS X.

    I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
    I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
    iPhoto cannot be opened because of a problem.
    Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
    Click Report to see more detailed information and send a report to Apple.
    Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
    Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
    Thanks tons...

    Thanks Terence,
    I did get it working finally...and your last advice was what I needed.
    I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
    This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
    Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
    I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
    I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers.

  • IPhoto cannot export video after installing Yosemite, HELP. It happens to my 2 MacBook Pros, 2 Airs and iMac.

    iPhoto cannot export video after installing Yosemite.

    You have a problem and yo need to solve it
    If you want help you need to do more than state an abstract problem - we need details - what can't it? what makes you thing it can't? what errors occur? what are the symptoms?
    Your post is like "my car won't start" - with no details it could be anything from having lost the key to gas - you have to provie details
    LN

  • Whenever i update iPhoto by my app store after the download completes a message appears stating that a problem has occurred iPhto cannot be installed please try again by using the purchases tab in the app store.....i am in a big fix please help

    whenever i update iPhoto by my app store after the download completes a message appears stating that a problem has occurred iPhto cannot be installed please try again by using the purchases tab in the app store.....i am in a big fix please help

    There's a link on the right hand side of the App Store Window.LN

  • I have several keynote presentations on my computer but now am getting the message that the program cannot be installed "because of a problem." All this started when I bought microsoft office for  University (2011). What is the problem and how can I fix

    I have several keynote presentations on my newish computer but am not unable to open them. I get the message "keynote cannot be installed because of a problem" (unspecified). Does anybody know why this happend? Does it related to using Microsoft "University"  2011? How can I fix it? Thanks!

    Thank you for your reply.
    I just tried the 3-step process suggested on http://support.microsoft.com/kb/2431353
    This all started when my mouse/thumb clicker was going crazy. Found an expanded battery. Obviously need a new battery. Unfortunately must wait 6 weeks to get my new battery. Meanwhile, I'm running my computer on AC only, as there appears to be no other option. I was informed that when using AC only (no battery) some high-energy-use programs like Office might not function.
    Do you know if there is away to use office even when just using AC and not having the battery in? I'm doubting if I have other OSX problems because everything else works: email, safari, itunes, iphoto, quicktime, etc . . . . ?
    ciao,
    Masego

  • I am trying to upload my photos to iphoto. I keep receiving a error message that say "Iphoto cannot import your photos because there was a problem downloading an image" What do i Do?!

    I am trying to upload my photos to iphoto. I keep receiving a error message that say "Iphoto cannot import your photos because there was a problem downloading an image" What do i Do?!

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • IPhoto cannot find photo to open

    I have imported hundreds of photos into iPhoto. After installing 10.5 (upgrade method), many of the pictures I had imported previously will not export nor attempt to open when I drag to PSE 4.0. The message "cannot locate the photo" appears. I have no idea where it is in order to locate it. My "library" icon is gray....

    ifarabee
    Should I reinstall iPhoto?
    I don't see what that would achieve. The issue with "where are the pics?" and as such, is with your library rather than with iPhoto.
    Go to your Pictures Folder and right click on the iPhoto Library Icon. Choose 'Show Package Contents' and a finder window will open showing the contents of the library.
    Your pics should be inside the Originals Folder, in the individual Events folders. Can you see them?
    Regards
    TD

  • I have all my photos but for some reason iphoto cannot read them?

    I recently backed up all my photos and reinstalled Mac OS X 10.5.6. iphoto would not launch so I installed the iphoto Library Manager. now I can get iphoto to run but when I try to add my photos or direct it to a iphoto library I get the error message...
    The following files could not be imported (they may be unrecognized file type or the files may not contain valid data)
    I have also gotten...
    The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it.
    I have gone in and tried to change the settings of the files to read/write and put in my password but then I get the " The following files could not be imported (they may be unrecognized file type or the files may not contain valid data)" error message?
    Please help. I have all my photos but for some reason iphoto cannot read them? They are jpg files.
    Message was edited by: Jengirlie

    I recently backed up all my photos
    How did you do this?
    These Unable to Import and Locked Library messages are common symptoms of a damaged database file. As iPhoto Library Manager is unable to rectify the situation you'll need to do a Manual Rebuild as described in this article
    http://docs.info.apple.com/article.html?artnum=107947
    Regards
    TD

  • Duplicate cleaner for iPhoto cannot continue as Library is not selected in iPhoto.

    I.) Version Information:
    iPhoto version 9.6 (910.29)
    Duplicate Cleaner for iPhoto version 1.8 (1.8.01)
    OS X Yosemite (version 10.10.1)
    MacBook Pro (13-inch, Mid 2012)
    I have only one iPhoto library.  I have launched iPhoto prior to launching 'Duplicate Cleaner for iPhoto."
    II.) Error message:  "Duplicate Cleaner for iPhoto cannot continue as Library is not selected in iPhoto.  Please start iPhoto and select a library."
    III.) What i've tried:
    1.) disabled photo stream in iPhoto.
    2.) launched iPhoto while holding command & option
      a.) - Repair Permissiones
      b.) Rebuild Thumbnails
      c.) Repair Database
      d.) Rebuild Database
    3.) Disk Utility --> verify & (later) repair disk permissions.
    4.) (after turning off file vault encryption) I ran resetpassword from the terminal and reset permissions exactly as described here:  http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
    5.) Deleted "com.apple.iPhoto.plist" (and subsequently recreated it at 1st launch of iPhoto)
    6.) Verified that my user account is the owner of my iPhoto library
    7.) Against my better judgement, I called their support.  I even participated in the Log Me In Rescue support session.  I hung up when their agent told me to reset Safari.
    I'd like to think that I'm not an idiot, but I have tried everything I could think of.  I haven't been able to find much online.  I understand that this is 3rd party software, but I don't know where else to post this.  Any help would be greatly appreciated.

    Old Toad,
    Thanks for your response.  I was just about to try your suggestion when I opened Mail.  In my frustration, I emailed their support last night.  To my surprise, they offered a solution.  I just downloaded this "beta" version, and it worked.  I just removed several duplicates.  I have posted the resolution that worked for me below.  Again, thank you for your suggestion. 
    Date: December 28, 2014 at 3:18:43 AM CST
    Subject: [TUMM #WYO-597-59222]: “Duplicate Cleaner for iPhoto cannot continue as Library is not selected in iPhoto. Please start iPhoto and select a library."
    From: TuneupMyMac Team <[email protected]>
    Reply-To: [email protected]
    To: [ Redacted ]
    Dear [ Redacted ]
    Thank you for writing to us.
    We have a beta version of the program which may resolve the problem you are facing.
    If you wish to use it, you can download it from the link below:
    http://cloudfront.systweak.com/duplicatecleanerforiphoto/Duplicate_Cleaner_For_i Photo.zip
    Please save it on your Mac and then double click on it to install it.
    It should work.
    Please do not hesitate to contact us, should you have further queries.
    Regards
    Varun T[ Redacted ]
    Systweak Support Team
    For Emergency PC Support please call (855) 765-6710 (toll free for US and Canada)
    Für Notfall PC Support, bitte rufen Sie auf kostenlose Nummer 0800-180-0542 an.
    If you are not satisfied with the answer, please contact the Chief Development Officer directly at [email protected]
    Ticket Details
    Ticket ID:[ Redacted ]59222
    Department: TuneupMyMac
    Type: Issue
    Status: Closed
    Priority: Normal
    Support Center: http://support.systweak.com/kayako/index.php?/TuneupMyMac

  • What can i do, when i receive a message saying iphoto cannot be opened as it may be damaged or incomplete?

    what can i do, when i receive a message saying iphoto cannot be opened as it may be damaged or incomplete?

    Reinstall it.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • I purchased from previous owner and cannot update installed software

    I purchased my MAC Air from previous owner and cannot update installed software: iphoto, numbers, pages...  How may I get access to these software? I am willing to purchase license, if necessary...just do not know what to do.

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

  • FF downloaded some update and now I get error message saying update cannot be installed until I get rid of extra FF copies on computer-but I DON"T have any extra copies. I cannot even uninstall the only FF I now have!

    I have a Toshiba laptop, Windows & Home Premium Edition operating system. I had FF 3.6.3 installed and up until 6:00 today it was sort of working properly. I find out later that my huasband cannot even open the browser, as every time he does, a dialog box opens up whcih says "UPdate cannot be installed. Please make sure no other copies of FF are running on computer, then restart FF to try again." But I do not have any other copies of FF. I really do not like it when FF auto installs stuff without my permission. Many times this stuff is downloaded and installed, only to raise havoc with my computer.

    Try a smc reset:
    http://support.apple.com/kb/HT3964

  • Cannot execute Install for database ORACLE_HOME

    Dear ALl,
    EBS 11.5.9 with Windows 2003, during multi-node installation error.
    log file
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 11.5.9.21
    >> Install session started : Fri Jul 25 17:41:05 GST 2008
    >> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    >> Command Line arguments for this execution :
    =================================================================
    Install Session Information
    Host Name : sysd.apps.com
    Host Operating System : Windows 2000
    User running Install : applmgr
    =================================================================
    InstUpgPanel - User chooses to Install Oracle Applications
    NumNodesPanel - Multi-node Selected
    SIDSeedPanel - The PROD database is set to PROD fresh install database
    ProductPanel - The following are the selected Product Groups for instance PROD
    Basic
    E-Business Intelligence
    Marketing
    TeleSales
    Field Sales
    Order Management
    Inventory Management
    Purchasing
    Discrete Manufacturing
    Process Manufacturing
    TeleService
    Service Contracts
    Project Costing
    Project Billing
    Financials
    Human Resources
    ProductPanel - The following are the selected Product for instance PROD
    0
    160
    190
    265
    601
    174
    175
    690
    874
    709
    454
    452
    450
    558
    451
    530
    517
    520
    549
    670
    691
    882
    521
    676
    880
    696
    697
    660
    522
    544
    869
    676
    279
    697
    660
    702
    401
    665
    673
    401
    665
    201
    202
    250
    401
    702
    703
    704
    705
    706
    712
    550
    551
    552
    553
    554
    555
    556
    557
    514
    511
    542
    862
    696
    872
    170
    866
    518
    515
    510
    870
    524
    542
    275
    275
    101
    140
    200
    222
    240
    260
    600
    8400
    8401
    8450
    8901
    231
    673
    800
    804
    8301
    8302
    TerritoryPanel - The following are the selected settings for instance PROD
    LanguagePanel - The following are the selections from the Language Panel:
    US - American_English
    US - American_English
    US7ASCII
    US7ASCII
    AMERICA
    MultiNodePanel - Selected nodes:
    [Ljava.lang.String;@eddac
    [Ljava.lang.String;@7b7565
    [[Z@583cf4
    QuickPanel - Empty Fields were encountered. Number of empty Fields:1
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME created:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory created:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.apps.com
    Ping request could not find host sysm.apps.com. Please check the name and try again.
    Error - host.domain ping has returned an error: 1
    System variable PATH set to:
    C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    appsa.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME available:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory available:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.appsa.com
    Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
    Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
    Ping statistics for 208.87.33.150:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 295ms, Maximum = 295ms, Average = 295ms
    host.domain ping has suceeded
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:
    Install Oracle 9i technology stack for PROD.
    Install Oracle Applications Database Seed for PROD.
    DoInstallPanel - User continued install at warning dialog.
    DoInstallPanel - Beginning install for all users.
    Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
    RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
    APPL_TOP location: e:\oracle\prodappl
    Database ORACLE_HOME: e:\oracle\proddb\9.2.0
    Database SID: PROD
    Database Context Name : PROD_sysd
    Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Total number of processes in Current Install 3
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
    "Database ORACLE_HOME installation succeeded"
    e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Please guide.

    Hi,
    Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    ------------------------------------------

  • I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

    iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
    I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
    This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
    Thank you.
    -Kait
    My phone is the iPhone4 and my computer is a Windows Vista

    I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
    Otherwise, do you get an error code? This might point us in the right direction.

  • I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.  I get the message "Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already

    I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
    I get the message “Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already exists on this disk”
    If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
    I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
    How can I solve this problem

    Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

Maybe you are looking for

  • Acrobat Reader DC - auto defaults to .PDF viewer

    I work in an enterprise environment that supports around 1200 computers.  I have about 80 users that have various versions of Adobe Acrobat Pro installed on their office computers. When we upgraded our reader product to DC and deployed it, all of the

  • TS2771 Ipod Touch 4th Gen Camera doest function despite using troubleshooting steps?

    I have tried using the troubleshooting steps outlined on this site but the camera fails to open, or switch between the front & rear cameras?  Can tis be repaired, if so what is the estimated cost?  My son's Ipod has the latest updates.

  • Help with Decode/Case

    Hello All, Can I use decode/case function within a decode function? {code} SELECT TO_CHAR (           EDMS_STRAGG_WC (              DISTINCT DECODE (                          eqs.attrib_code,                          'PRODUCT_AUTHORIZATION',    'Auth

  • Transferring pc to macbook pro

    I need help transferring all my photos and information from my hp pc onto my new macbook pro please.

  • Playback and record to ipod

    When I playback albums from library that were imported from CD, and do not have any "pause" between the original tracks, the playback "pauses" between tracks. Have checked crossfade to "0". When I record to my ipod the results are the same. Sample =