IPhoto Changes sRGB IEC61966-2.1 Into Camera RGB Profile

Hi,
Has anyone else noticed this? iPhoto '08 seems to automatically alter the ColorSync Profile of any photos you import into it.
I have a Canon compact camera. Normally the ColorSync Profile in photos it takes shows up as sRGB IEC61966-2.1 in Preview 4.1 However, as soon as they've been imported into iPhoto, their ColorSync Profiles change to Camera RGB Profile.
Is this normal? How is Camera RGB Profile different to sRGB IEC61966-2.1? I'm worried that iPhoto is/has destroyed useful data in all of my photo files.

If you compare the camera RGB profile with the sRGB or sRGB IEC61966-2.1 with ColorSync you'll find that they are very similar and that the three could be interchanged without issue. if you're concerned about the camera RGB profile, search for it and remove it from the HD (or just zip it and delete the unzipped version). Then it would not be available to be used by iPhoto.
There is an Applescript script to assign the sRGB IEC61966-2.1 to any file or folder of files dropped on it. It's not the most preferable way to change profiles. That would be to convert to the profile. That can be done with ColorSync but will have to be done one file at a time. You could try a photo with both ways to see if either is preferable over the other. You can get the script at Toad's Cellar.
Have you found that the camera RGB profile prints unsatisfactorily when compared to the sRGB profile?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • Any way to get sRGB IEC61966-2.1 as an export profile?

    Just realized that my exports, destined for Flickr, aren't in the correct color space. Everything looks great on my Mac in safari, but terrible in Firefox or other browsers.
    ....but, I only see sRGB, ProPhoto and 1998 as choices in LR's export options, and I'm told sRGB IEC61966-2.1 is the space to use for the web.
    thanks for any advice on this.

    No, there is only one sRGB. If that article says otherwise, you're either reading it wrong or the writer is wrong (it appears the latter). IEC 61966-2.1 is just the name of the document the standard was written up in. There are some drafts of different versions but they just define slight differences in viewing environment and have nothing to do with the computer display.
    If you see dull colors using sRGB in unmanaged apps, your screen either is not well calibrated, or you have a small gamut display such as a laptop. The solution for the first is simple: recalibrate using hardware. There just is no other solution. The second you cannot solve. Your display in that case is just not good enough to trust unmanaged apps. Note that unmanaged apps will ALWAYS look wrong on unmanaged apps, no matter how well calibrated your display. If your display is very good, you will see very little difference. Unfortunately, you cannot control what others see as nobody calibrates. However, using sRGB gives you by far the best chance of them seeing the right thing. This is due to the fact that most displays cluster around the sRGB standard.

  • I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to cr

    I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that.  To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
    I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it.  I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
    When I am trying to upload a photo to the web, I get the Finder folder showing  with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth.  This is a folder name that I cannot find in my HD anywhere when I look for it.  If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly).  How do I get my folder of edited photos to show when I want to upload a picture to the web?
    Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

    See my response to your other post.

  • Look of photos change when import from D40 into iPhoto 6

    I'm using iPhoto 6 and have a Nikon D40. I'm having a problem when I import my photos -- the image quality changes when they go from the camera into iPhoto. The images look more contrast-y, more saturated. I mean, the reds and oranges are so intense it's crazy. They definitely did not look like that when I viewed them in the camera LCD.
    I've tried checking in preferences, but can't seem to find anything that would alter the images during transfer. Would this be a camera problem? Anyone using iPhoto 6 have the same problem as I am with their D40?
    Any help would be much appreciated!

    I am having the same exact problem... iPhoto 6 and Nikon D40. If I import the photos to a folder first, then import from the folder to iPhoto, I can open the iPhoto version and then open the folder version using Preview, just by clicking on the original. I then compare the two side-by-side on the computer screen. The original always looks fine in Preview, so it is clearly a problem with iPhoto over-saturating the photos. I have no solution, but only this observation.

  • IPhoto changes my dpi while editing - what to do?

    Hello!
    I have iPhoto 6 and have taken over 500 pictures for a wedding. Now they want to print bigger photos (A4) from my photos. All of a sudden we notice that all of the photos that I have taken with my Nikon D70, that are vertical have the dpi 70 instead of 300 needed for good quality print. Some of these pictures I have cropped but not all. I also have not turned all of them around. Most of them where taken the "right way" already with my camera. What I have done is that I have edited the colour or exposure in iPhoto. So why has iPhoto changed the dpi and why does it not ever notify me about this? Is there some way in how to prevent this from happening? Or change the dpi later in iPhoto? I can't possibly start re-editing each vertical photo in Photoshop, that is absurd! How can I prevent this from happening again?
    Thank you for your help!

    lkaranko:
    Welcome to the Apple Discussions. The resolution has not been changed. It's the pixel dimension of the image that is the more important factor. If you take a 1600 x 1200 image at 72 dpi it will give you a 22" x 16.6" print. But if you take that same file and print at 300 dpi you'll get a 5.3 x 4" print.
    iPhoto just reports the resolution at 72 dpi which, if printed at that resolution would give you a very large print. If you select a print size iPhoto will squeeze the available pixels into those dimensions. The smaller the print size the larger the resolution will be.
    In rotating the files a new jpg file is created and when it's saved there will be some jpg compression applied. The original file is left intact and can be recovered by selecting the photo and using the Photo->Revert to Original menu option.
    The bottom line is: as long as the number of pixels do not change (or by very much) the inherent resolution of the file is not changed.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • IPhoto changes the original creation date to 12/31/1969

    Hi folks, this is a problem I have been trying to resolve for a very long time.
    I have a large collection of pictures that I took with a Palm Zire 71 and Zire 72 going back to 2003. Every time I import the files with iPhoto (File > Import to Library), iPhoto changes the original creation dates of the jpgs to 12/31/1969. I have tried many different things... most recently I burned the files to a CD, confirmed that the original creation dates were still in tact, and tried importing with iPhoto right from the CD. I got the same result... all photos with the date 12/31/1969. All photos completely disorganized because of Palm's less than great file naming structure. I need to keep the creation dates intact for the iPhoto books I want to make with them, so changing the file names won't work as a solution. Even changing the files names to the creation dates plus a counter would be very difficult because it is over 1500 pictures. Does anyone else know of this problem and perhaps have a solution for it? Thanks!

    Thank you for the suggestion TD. But the Batch doesn't help in this case because so many of the photos were created on different days. I would still have to manually go into each of the creation dates and change them back to the original.
    That's just not feasible for 1500 files. iPhoto shouldn't be stripping the files of the creation dates at import to begin with. I'm hoping to find a way to get the import process to work properly for these files. The weird thing is that iPhoto doesn't seem to do this to files create on a more typical point and shoot camera,
    but only on these Palm files.

  • IPhoto changing created dates?!?

    For a while, I was using iPhoto only for getting pictures off my camera. Then I'd drag them into a folder and organize them by date. I had a ton of a photos I just got around to organizing and I've noticed that iPhoto has screwed up ALL the created dates on almost every photo. I usually organize them by date, but now I can't because of iPhoto.
    Anyone else notice this? Any way to change it? Is there a program I could use to "reset" all the created dates back to the date the pic was taken? This is driving me nuts!

    The question I have is that if you change the dates in iPhoto does it also change the date on the original?
    Well, it won't change the Original Files...
    Unless you tick the box marked *Modify Original Files*
    Then I guess it might. But will only modify the Exif data, not the File data.
    I have been searching high and low for a decent program that will allow me to batch set the date and time of photos to the EXIF date and time.
    I'm not sure what you mean by this, but you need to move carefully. The FILE data can report quite correctly that a particular file was created today - say when you copied a file. But the Exif data belongs to the PHOTO, and can also, quite correctly report that the photo in the File was created on January 2 1996. Both dates are correct because both dates record the different things.
    Are you trying to get the Finder to report the Exif data?
    Regards
    TD

  • Does iPhoto change a RAW file upon import or export?

    Hi! New Mac user here. Trying to get my workflows and backups going.
    I created an iPhoto library from multiple sources: migration from PC, folders from backup HD, new photos from iPhone and camera memory card.
    So I have one consolidated library that is almost 300Gb but I want to go through and remove and archive many of these, leaving only a much smaller working library with the archive copies of some originals stored somewhere else.  These archive copies will not be referenced files, my plan is to export them from iPhoto, back them up to an external HD, and then delete them from the iPhoto library. If I ever decided to look at them again, I would import them from the archive HD.
    Ideally, I should have imported all the files to my iMac desktop and then imported only what I wanted into iPhoto, but because everything is now consolidated (and the photos from the iPhone and camera memory card are erased), I don't want to wipe out my iPhoto library and start over. So I'm starting with this huge managed library and want to export a good part of it to what I will call "the archive" to cull it down.
    My questions: Upon import, did iPhoto change the RAW master files, or will those be the same when I export them (assuming I made no edits)? Did iPhoto change the JPEGs or will those also be the same when I export them?
    How do I export the files I want to save to the archive before deleting them from the iPhoto library?
    Alternatively, I think I will use Aperture going forward for editing.  Should I use that instead for trying to export these files?
    Thank you for any assistance you can provide.
    LCA
    iMac 4 GB, 2.7 GHz, Intel Core i5
    OS X 10.7.4
    iPhoto 9.3.1
    Aperture 3.3.1

    File -> Export and in the resulting dialogue set the Kind to Original
    That will export a byte by byte copy of the file you imported, unchanged in any way.
    Can I suggest another way of working. Why not have two Libraries? An archive and a working one?
    The principle advantage is that you won't have to import pics to review them again later, just open the other library.
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    Now you have two full versions of the Library.
    3. On the Internal library, trash the Events you don't want there
    Now you have a full copy of the Library on the External and a smaller subset on the Internal
    Some Notes:
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    You can keep the Library on the external updated with new imports using iPhoto Library Manager

  • SRGB vs. sRGB IEC61966-2.1

    Anyone know what the difference is between
    /System/Library/ColorSync/Profiles/sRGB Profile which says it's "sRGB" version 2.2.0 and is 1,080 bytes in size
    /Library/Application Support/Adobe/Color/Profiles/Recommended/sRGB Profile which says it's "sRGB IEC61966-2.1" version 2.1.0 and is 3,144 bytes!
    Obviously one came with Mac OS X or Aperture, while the other came with Photoshop CS2. But what is reallly the difference between the two profiles??
    I also have a Nikon sRGB profile. Seems like I should pick one and use it consistantly in Aperture, Photoshop and Nikon software? But which one?

    Hello, GTPhotoMan
    Quote: "I believe the question was:
    What's the difference between sRGB version 2.2 and sRGB IEC1966 2.1"
    Yes, I know.
    If a person is going to work in sRGB they should also know the pros and cons of that gamut.
    It is recommended by numerous camera manufacturers like Nikon to set the camera Color Mode to that of Adobe RGB unless I'm mistaken, and I think I am not, taking shots in sRGB which is the default for Nikons is not the best gamut so there is no good reason to ever use sRGB over Adobe RGB especially if you are going to edit them in Aperture or Photoshop.
    Knowledge is good. Just trying to help out Piggy
    Shooting and working in Adobe RGB 1998 and should you want to -- proofing in sRGB is having the best of both worlds because you would never force the photographs into an inferior gamut when you take them.
    love & peace,
    victor

  • IPhoto changing file extension...

    I use a very old version of Photoshop (Adobe PS CS Version 8) for digital scrapbooking.  I store all of my files on an EHD because I have thousands, and I don't want to slow down my computer's performance.  It had been hooked up to my desktop, but I recently started attaching it to my MacBook because that has become my main computer.  When I hooked it up, I had to update my iPhoto libraries to work with my MacBook's version of iPhoto ('11).  So I did.  Now when I try to open my files, I get the error message that an invalid JPEG marker type is found.  Most of the files, aren't even jpegs, they are pngs or psds.
    It appears that when I try to open a file, iPhoto is duplicating it and giving it a jpeg extension, which is unreadable by Photoshop.  Is there any way to stop this from happening?  If not, can I undo what I've done and reattach it to my old computer?  I'm talking THOUSANDS of files!
    Thanks for any/all of your help!
    -J

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    Regards
    TD

  • Canon 40D profile shows as "Camera RGB" instead of "sRGB"

    When I open 40D files in Photoshop CS3, I get a profile warning that says "Camera RGB"
    Is this normal? I don't recall getting this warning before and I have the 40D set to use sRGB and photoshop working space set to "working space - sRGB IEC1966-2.1"
    Thanks for any input on this

    This is set in ACR workflow options (the blue link below the main image window).
    The camera setting is irrelevant, that only applies to in-camera processed jpegs. A raw file has no color space until it's opened into one in the raw converter.
    Stay with sRGB until you know why you want a bigger color space. It has advantages, but also carries risks that can bite you if you don't know what you're doing.

  • Opening photos from Lightroom into Camera Raw?

    Hello!
    I have a little problem since I upgraded to CS4.
    I used to open my (RAW) photos from Lightroom (2) into Camera Raw - it did it automatically when I clicked "edit in photoshop". Now it doesn't work anymore, and I have no idea why - it opens the pictures directly into Photoshop. I was told in the Lightroom forum that it's a functionality that was changed in CS4 and that I wouldn't be able to get to Camera Raw from Lightroom anymore.
    However, I really liked my old workflow Lightroom > Camera Raw > Photoshop, and I much prefer CR's interface, so if anybody's got an idea on how to fix this, or get it to work again, it would be really great.
    Any help would be greatly appreciated.
    Thanks!

    Maybe the following would help.
    1. In lightroom, go to: Photo>Edit In>Open as Smart Object in Photoshop.
    2. Once the photo is in photoshop, double click the Smart object thumbnail in the layers panel to open camera raw.
    MTSTUNER

  • IPhoto changes slideshow when exported

    I am having significant problems with iPhoto changing the slideshow when I export it to iDVD or even Quicktime. This is so frustrating! All I can attribute this to, is one of the updates. I have used this to do DVD's for weddings, graduations, birthdays, anniversaries, etc. with no problem, then somewhere along the line, it began changing the timing. All my hard work to synchronize the exact picture with the music - GONE!
    Please help, as I have lots of these to do on a tight turnaround time. I adore my Mac & really need for this to work like it used to!
    Power Mac G5   Mac OS X (10.3.9)  

    The audio syncing has been a problem with iPhoto 6 for a while now. There is a couple of ways you can do what you want;
    1 - create the slideshow in iPhoto without music and share to iDVD.
    2 - when the import into iDVD is complete, close iDVD without saving and look for your movie in the Movies folder. This produces the larger size movie than just exporting to Quicktime does.
    3 - open the movie in iMovie and add your tracks. You have considerably more control in fade ins and outs, cutting out the dead time at the end of a track, etc.
    4 - save the iMovie project.
    5 - open iDVD, select your theme.
    6 - drag the iMovie project file into the iDVD menu window, avoiding any drop zones. This avoids additional encoding by iMovie so the only encoding done is by iDVD when you go to save as a disk image or burn directly to disk.
    Are you using the KB effect in your slideshow? If not, you can get, IMO, better image quality slideshows by creating the show entirely in iDVD from the imported stills. By selecting the option to scale photos to the TV Safe Area you won't lose any of the picture to the TV overscan phenomenon that affects all QT files used in iDVD. This method also allows you to add titles/sub titles to selected slides or add a text slide as a title. The scale to audio in iDVD is very precise.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • IPhoto will not longer download photos from camera or memory card

    Ok, I have iPhoto '08 and a Nikon D70 camera. This morning I went to download photos from the camera and it was slower than usual to connect to the computer. All the photos show up as usual but when I click to import them I get a message and it can't download any of the photos because they are an unknown format.
    I took the card out of the camera and put it in a card reader and got the same message.
    Neither the camera OR the card reader showed up as a device when I ran the image transfer app.
    Using the card reader and the Finder, I was able to copy all the pictures to a folder which I was then able to import into iPhoto. After than I used the camera to reformat the card and took a test picture and got the same error messages.
    So, any ideas?

    I found a solution in a couple of other threads. The main problem is when you start iPhoto from the dock, the unix process is owned by root, and not as it should be, by you. If you start iPhoto from the Terminal by entering /Applications/iPhoto.app/Contents/MacOS/iPhoto, iPhoto is able to import the images.
    I don't believe that starting the applications from Terminal is a good solution, so I looked for another - reinstalling Leopard seems to be the best option, and it actually works. I can now import images to iPhoto again.

  • I have 1000  photos in an iPhoto Library that won't import into Photos because it says the metadata can't be read.  Yet those JPG files open just fine in iPhoto, GraphicConverter, et al.  What gives?

    I have 1000  photos in an iPhoto Library that won't import into Photos because it says the metadata can't be read.  Yet those JPG files open just fine in iPhoto, GraphicConverter, et al.  Any thoughts?

    It’s part of the basic install of OS X. So unless you deleted it then it’s there in your apps folder. If you have deleted it, it’s on the System Restore disks that came with your Mac. You will be able to extract the installation package using Pacifist.
    Alternatively, if you’re using almost any camera +apart from a Canon+ then the camera card is visible on the desktop and you can drag the movie to the desktop using the Finder and import from there.
    No matter what camera you use, if you pop the card from it into a USB Card Reader then it will be accessible via the Finder. Card Readers are inexpensive and all round a better idea.
    Why use a Card Reader?
    Because it’s safer: Less risk of your images being lost if your camera shuts down during transfer.
    Because it saves the battery on your camera
    Because it saves wear and tear on your camera ports
    Because it’s almost always faster.
    Regards
    TD

Maybe you are looking for

  • Multiple mailboxes for the same user

    I have configured mail to work with virtual domains so I can create a different mailbox for each email address but how do only allow the mail to that specific address to come through. As I don't want the local and virtual in the same mailbox.

  • Sharing an app built with Siena

    What should I take into account, when publishing my app for distribution to others? I know, when running InstallApp, I should select 'Create an appx file for sharing'. When I do so I also get a button for 'Certificate'. I wonder if I share my publish

  • Require help on the Query related to where condition

    Hi All, i am a java developer and was required to write a query for some of my operations to get the data from oracle database. i am stuck at one point. please help me. i have table with 3 columns. ID | Name | Value 1 | ser | x 1 | Bus | a 1 | pol |

  • NetBeans BluePrints Ajax autocomplete component data binding

    Hello, I'd like to test the autocomplete feature of an input field from the BluePrints Ajax. But I have difficulties to bind the autocomplete list to a datasource. Is this possbile within the gui (netbeans, vwp) or do I have to code it manually? loon

  • The fan is not working. what should i do ?

    The fan in my laptop is not working and I get a message regarding that when I start the laptop. What should I do ?