IPhoto datestamp is not consistent

I backup my iPhone photos to a Finder folder. In the past when I dragged a photo out of iPhoto to a folder the date on the new file was the date the photo was taken. I have verified this behavior did occur on some/all of my old photos. But now the date of the new file is the date on which the photo was imported into iPhoto. This can be days to weeks after the photo was really taken.
I have tried to verify this behavior and learned that some of my photos will carry along the original date, while others will get the date of import. I cannot see any consistent behavior.
Two key changes in the past few years are that I was on an iPhone 2G, then I upgraded to 4. I also have upgraded from Leopard to Snow Leopard.
I'm using iPhoto '08 v 7.1.5.
I've deleted the ipod photo cache and my iphoto.plist file. Are there any other ideas which I can try without having to spend money for iPhoto '11 ?
Thanks,
Sean

Your question is not clear - I think you are confusing file dates (generated by the finder and stored in the file metadata and related to the creating and modification date of the physical file) and the photo date (genereated by the camera, stored in the EXIF fields within the JPEG
Where are you seeing the dates you are concerned with? Using the finder or using a photo program that looks at the EXIF data?
LN

Similar Messages

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos.

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos. Occasionally it will recognize and download photos, most of the time though it hangs in "loading" mode with nothing downloaded. I've unplugged, replugged numerous times, tried a different USB port, tried the two cameras so it's not the camera or line that's the issue, turned the computer off, turned iphoto off, turned everything else off and stil nothing. I need my photos for my work and can't get to them, this seems to be an issue with Maverick AGAIN!!! Is there a fix? HELP! Thanks!

iPhoto Version 9.5.1
Thank you for your help Terence. I had 140 photos on my Nikon, none were viewable in iphoto, in Image Capture 5 were viewable, 135 weren't. I tried importing one to my desktop but it remained static and didn't move over. I just deleted all the photos on my camera, took a fresh photo and after waiting a good 4 minutes finally uploaded to both iphoto and Image Capture. As this took so long for one photo I'm wondering if the memory in my computer would impact the speed. I have 350GB used and 150GB left
By reformat the cards do you mean the flash card in the camera? I don't know how to do that, it's less that 6 months old.

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

Videos in some iPhotos Albums do not show up on Apple TV.

Videos in some iPhotos Albums do not show up on Apple TV. Videos in other folders are there. For instance, one album has 43 videos and 1600 photos. Apple TV only shows the 1600 photos. Is there an issue with albums that have both photos and videos?

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

Airport Extreme Not Consistently Assigning DHCP

I am using a relatively new (within the last year) Airport Extreme as the primary router on my home network. Connected directly to the router is a GigE switch, an AT&T Microcell, and another router - an Aruba RAP which creates a secure VPN for my home/remote office network. The connection to my Apple desktop is made through the GigE switch, as are three additional wired connections to other devices in my home, including two Apple TV's and (hopefully) two Airport Expresses.
I recently discovered when trying to configure a new Airport Express to extend my wireless network over ethernet (roaiming network) that my Airport extreme is not consistently assigning the IP addresses within it's defined DHCP range (10.0.1.0 - 10.0.1.200). About half of the time devices on the network are getting a default 169.254.x.x IP address, which (in the case of my desktop) results in an 'self assigned IP' error within the network settings. I can reboot my apple desktop and the next time it gets a correct 10.0.1.1 address. Reboot again, it defaults back to a 169 address - and so on. It doesnt seem to make any difference if I connect my desktop directly to the Extreme, or, if I connect it through the GigE switch. And, every time I get a 'self assigned IP' I have no connectivity beyond the Extreme (no internet), and I'm forced to use my wireless/Airport connection.
Another problem here is that the Expresses both expect to receive 10.x IP addresses and when they don't get one, they basically become pretty $100 paperweights when connected over ethernet. Also, if you try to configure a new Express without the 10.x address it expects to be assigned (and defaults to a 169.x), the Airport Utility will no longer 'find' the Express once the Express auto-restarts and the update will fail. I learned this after spending two hours on the phone with Apple support yesterday - during which they were able to get my first generation Express configured, but, not my 24-hour old second Generation Express, which continues to act only as a paperweight. Oddly enough, everything works perfectly well if I use only wireless connections to the Extreme - there are no IP problems and everything works correctly. Unfortunately, I want to use wired connections for all my devices (expresses, Apple TV's) because we stream alot of audio and video.
Is my Extreme not working correctly? Does anyone think it's problematic to have a second router (the Aruba) connected behind the Extreme? I suppose I could force some components to use only specific IP's, but, that sounds like a pain. If the Aruba is problematic, I would also consider a second internet connection, or, finding some way to split home IP traffic vs work IP traffic.
Thoughts?

I've been doing some research and it appears the 'self assigned IP' address is a common problem in the Apple support community. And, for what it's worth, it appears an inability to isolate or accurately troubleshoot the problem - by users or Apple tech support - is a recurring theme. I totally understand that no two home networks are exactly alike (different ISPs, switches, configurations, etc.), but, after being a die-hard PC user for my entire life I can honestly say I never encountered anything like this while using my PC. I'm not about to trash my Mac, but, the Apple 'ease of use' selling point is quickly losing it's lustre.
I got into this mess because I added a GigE switch to my network. Rather than buy a different switch (a tactic which assumes my problems are being caused by the switch) I'm inclined to buy another Airport Extreme and try daisy-chaining them together to overcome the reason I bought the GigE switch in the first place, which is not enough ethernet ports on the Extreme. That, or I'll spend a weekend in my attic re-wiring my home network to daisy-chain my two Express devices together instead of requiring individual connections to my router. My experience with Apple hardware thus far is that it prefers to 'play nice' with other Apple hardware over non-Apple hardware. It could be $100 error on my end (or, a weekend of not doing yardwork), but, I think it's the best shot. Other possible fixes, including manually assigned IP-addresses, put too much emphasis on software and network configuration - which (by my non-scentific analysis), are two areas even harder to troubleshoot.
I'll let you know how it goes.
Mh
Post Script - Dear Apple: please find a way to significantly increase the number of ethernet ports on your Airport Extreme Router. Thank you.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

Restoring iPhoto from Time Machine. However iPhoto albums are not transfer

iPhoto albums are not transferring. I just have a bunch of photos with no albums/details/comments etc. I have done a few searches in support and have found similar problems but nothing like mine, which seems to be that I have a back up of all my photos in Time Machine but when I open Time Machine, I cannot simply select a previous restore date as I have been able to with everything else so far. I have tried dragging the whole iPhoto Library folder to iPhoto but again, end up with thousands of pictures with no albums... Any suggestions? Thanks.
It seems iPhoto is backed up but does not have several backups in Time Machine.
Using iPhoto '06
Message was edited by: BrMendez

I think you may need to post this one on the Time Machine forum.
http://discussions.apple.com/forum.jspa?forumID=1227
In later versions you can restore +to the iPhoto Library+, but as v6 predates Time Machine it's not possible to do that. Hence you need to restore an entire Library and open it.
Regards
TD

GR/IR Clearing Account 2..... Not Consistent

SAP Experts,
I blocked GR/IR clearing account temporarely while I updated the open line item field. It turns out that after I finish running the program and unblocked the account. Receiving ca no longer receeive into teh account it says "G/L Accuont 2...... Not Consistent"
Does anyone knows what could possibly be?

I was able to go into IMG bring the field " Only Balances in Local Currency" then went into account brought it to a "ZERO Balance" with TCODE FB50. Went into FS00 and updated field. Then reversed entry, and it works fine.

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Suddenly, one of my iPhoto Libraries will not open, or rather iPhoto opens, but says there are no photos in the file. However, when I backed it up and looked into it otherwise, the images 86gigs are still there in the file. What to do??

Suddenly, one of my iPhone libraries will not open with 86 gigs of images: it opens and says there are no photos, yet by other looking, all the images are there and when backing up, it takes an hour.
Somehow iPhoto application will not recognize the images (over 13,000) in the file.
Any suggestions as to how to fix the matter<
Dr. Harris, Bermuda

To move from iPhoto 08 (which is v7) to iPhoto 11 (which is v9) requires that you purchase iPhoto 11. Your software update is running just fine. V7.1.5 is last version of iPhoto 08.
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
As to the problematic library:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

I cannot open iPhoto after upgrading latest apple updates. Getting a message latest iPhoto version is not available in the US

MacBook pro, 8GB, OSX Yosemite
I cannot open iPhoto after latest apple upgrade. Getting message latest iPhoto version is not available in the US.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Is there a way to detect all the photos already transferred to double (or triple) in iPhoto, so do not occupy space unnecessarily? Thank you from France.

Is there a way to detect all the photos already transferred to double (or triple) in iPhoto, so do not occupy space unnecessarily? thanks from France

Look in you main photo library. Are there doubles or triple photos there? If so delete the extras.
All photos are stored in the photo library. When you move a photo into an album the photo is not duplicated. The album contains a pointer back to the original photos. These pointers or aliases take up very little space.

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

Against TOU which you "agreed" to in order to post in these user to user forums. If you want to "suggest" something to Apple, do so in the Product Feedback area.

IPhoto datestamp is not consistent

Similar Messages

Maybe you are looking for