IPhoto does not respond even after I upgraded to iLife '11 version

Every time that I attempt to open up iPhoto it immediately freezes, and all the sites and manuals I have read say that I need to reinstall the program, I need to upgrade to the '11 version anyway (I had the '09 version I think) so I just bought the upgrade from the app store hoping that would fix the issue. Now it does open for two seconds, then says that I need to upgrade my library. I click ok and then it freezes up again. I am beyond frustrated and could really use the help, thanks!

Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products.

Similar Messages

  • HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    This is the ipod touch forum

  • Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

    my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

    Hello: Welcome to Apple Support Communities!
    Could you specify the Mac OS X version and also what computer you
    are using it on, with some detail? Some of these kinds of issues, while
    they may seem the same across various years of OS X, can have
    different causes and also different cures.
    With that information, someone may be capable of researching a reply
    most suited to try & see if it works in your computer + OS X system.
    One idea, which may/may not help, would be to start the computer
    from its most recent OS X DVD install disc, unless it has OS X 10.7
    or Later, where there is a Recovery partition on the HDD to boot from.
    Then use Disk Utility> repair disk, while there, also repair permissions.
    Thanks.
    Good luck & happy computing!

  • HT201412 iPad screen does not respond, even after several resets (both with iTunes and at the Apple Store). Apple is also unresponsive to a hardware problem once the product warranty period has expired. Does anyone have a suggestion?

    It is getting very frustrating to have Apple products.
    Constant software upgrades and product releases seems to be the sole focus of Apple.
    Apple does not offer hardware repair services. I can understand this policy when products do not fail. But it seems that this is not the case with Apple, as it becomes frequent that products fail just after the warranty period.
    New software releases also destroyed the value of a "GREAT EXPERIENCE". YouTube, Google Maps, ... all features that are deleted with the latest IOS and that Apple could not properly replace.
    It seems that Apple products are not 'consummable' products but 'disposable' products.
    Let's see how robust SAMSUNG tablets are

    Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
    The rest of your post is just a rant. Enjoy your Samsung products.

  • Question: What do I do if ipod does not respond even after reset

    I tried the advise, holding the sleep button and when the red slider appears I touched on the home screen until it fades. Still doest respond if aI turn on the pod. Please help, I can buy a new one anymore

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPad touch screen does not respond even after full restore and update

    I have an iPad 2 64 GB
    It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
    This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
    I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
    I have never dropped or damaged my iPad in any way.
    Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

    Thank you.
    I've already booked myself in to the Genius Bar this week.
    I suspect it is a hardware failure and more specifically a loose internal connection.

  • Mail application does not respond even after forcing quit over and over

    My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IPhoto does not start up after upgrading

    On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
    But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
    What can cause this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Iphoto does not respond with batch change

    Recently, when I do a batch change for example "descriptions" iphoto does not respond.  I tried to see if it was the number of pictures that I was batch changing but it freezes even with one photo.  I tried rebuilding thumbnails.  Any ideas?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • N7k console not responding even after proper boot, and even from rommon mode

    N7k console not responding even after proper boot, and even from rommon mode

    Try using a different application (putty) and test.  If that does not work, RMA the sup.
    HTH

  • Photoshop crashes each time i start it and it then does not respond and after 3 to 4 min sarts

    On starting photoshop on my macbook pro it crashes and does not respond and only after 4 minutes does it start, does any one have any suggestions on how to fix this as it is annoying to always have to wait for photoshop to start

    Hi Andy.  Can you give us some information?
    Which version of OSX?
    Which version of Photoshop?
    Is this a new installation? Or how long has it been working OK before this problem?
    Do you have any external drives?
    What are your Photoshop Scratch disk arrangements?
    The sort of issues that can cause a crash on start up are bad fonts
    Fonts — Troubleshoot
    Third party plugins
    Looking for a scratch disk that does not respond
    Driver problems — video card being a big one.
    Troubleshooting Steps to Fix Most Issues

  • Photoshop does not respond, once after startup!

    Hi there,
    Recently, i have bought a design standard CS 5.5, after installing and using for quite some time. The Photoshop CS 5.5 does not respond whenever i want to open any Photoshop file, once after startup?
    This issues has only occur in Photoshop but not my other adobe products.
    Hope to get some help!

    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance etc.)?

  • Changed icon now iPhoto does not respond

    Hi,
    Can anyone help me, I went a bit silly changing my folder icons, but have now found that iPhoto does not work. I did change the icon for my pictures folder, and the data is still there, but now when I try to open iPhoto it just says 'loading library' and nothing happens. I am using iPhoto 4.0.3.
    Thanks
    G4 Powermac   Mac OS X (10.3.2)  

    HI, Stuart. Changing a folder's icon puts an invisible icon file inside the folder, so you changed your iPhoto Library folder's contents without iPhoto's participation or knowledge, and now iPhoto sees its database as damaged. This is a useful lesson in letting well enough alone, particularly where no useful purpose is actually served by your meddling. "Purely cosmetic" tweaks of the user interface can have more-than-cosmetic adverse effects on how things work (or don't).
    Delete your custom icon from the folder, then hold down the Shift and Option keys while starting iPhoto. Keep holding them down until you're asked whether you want the database rebuilt. Say Yes and let iPhoto do its work. You will probably get everything back again in good shape.
    If your adventures with custom icons haven't messed anything else up, you're probably lucky.

  • M476dn does not go sleep after firmware upgrade

    I bought HP color laser jet M476dn few weeks ago - noticed that it does not wake up when trying to print, searched HP website and found that HP had an upgrade firmware to fix that issue.  Now the printer does not even go sleep even though the setting is to go sleep after 15 min - the power off was defaulted to never.
    The previous firmware version was 20140128 and upgraded to 20140614 (I think) - am I missing something here?

    Hello there, 
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Powerpc error when installing on intel mac, powerpc error when installing on intel mac

    Trying to reinstall some software that used to work & no I receive the following error: "Spyder3Pro_Installer" because PowerPC applications are no longer supported.  This happened on another application I was attempting to install as well.

  • Problem with RFQ

    Hi guys, I am facing a typical problem.  In case of quotation maintenance, for item-category 'D' i.e. for services, the condition type PBXX is automatically becoming not editable and i am not able to maintain the rate for serveces.  But if i give som

  • Cannot open connection in a peer-to-peer netword

    I created a peer-to-peer network between two PDAs loaded with Windows Mobile 5.0. It is shown that both of them were connected, and their IPs were assigned automatically.  But when I used TCP/IP Open function, it returns an error 10060 'Cannot open c

  • Postmaster account problem

    I'm using IMS 5.2 Patch 2 When I installed IMS, I just put [email protected] for the postmaster email address....so now my boss want me to create account name [email protected], so I created the account in IDA..but when I send email to the account, I

  • Hyperion Web Analysis --Waterfall Chart

    Hi, I have to create a waterfall chart in Hyperion WA report. Waterfall chart has to be created for different countries. Each country has 5-7 business units under it. Only Budget values for each business unit has to be included in the chart and sum o