Iphoto does not work properly after accidental power disconnect

I was working in iPhoto with a flash drive when the power cord became unplugged. When I plugged the cord back in, all the photos in my library vanished. I can still import from a camera/flash drive/disk but I can't put the photos in My Pictures file back in iPhoto, nor can I attach a recently imported photo to an outgoing email (using Safari).

Hopefully your library is valid - launch iPhoto while depressing the Option (alt) key and use teh select library to point to the location of the library

Similar Messages

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • How come duration in iPhoto does not work properly

    How come duration in iPhoto does not work properly

    Try select the Album in the Source Pane only, and not any of the pics in it.
    Regards
    TD

  • Ipad2, safari does not work properly after ios6 update. How do I fix it?

    I need help in fixing safari problems after ios6

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • IPhoto does not work properly in os mavericks

    The Instant slideshow format only displays one slide and the sequence then terminates.  Using "Select All" and playing the sequence causes the sequence to display in reverse order.  Bizarrely any asssociated music plays the right way.
    Even more curious, Slideshows proper play normally.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • NI-DAQmx 8.8 does not work properly after upgrade to LabVIEW 8.6

    Hi,
    I just upgraded to LabView 8.6 from version 7.1 and found out that the NI-DAQmx 8.8 drivers do not install correctly, since there is not Measurement I/O tab in the Functions palette (see attached document). The curious thing is that I can see all my NI-DAQmx devices in the MAX, and they all test correctly, i.e., they are working correctly. The sales representative for my area recommended me to uninstall , and reinstall LV8.6 and then reinstall the NI-DAQmx 8.8 drivers, but it did not work. I still do not see the Measurement I/O functions and my application says that it "cannot compile" the NI-DAQmx vi's. Thanks in advance for your help.
    Peter
    PS. Someone reported a similar problem back in 2003, but the final solution was not posted. Thanks again.
    Attachments:
    LV8.6.doc ‏116 KB

    Dear Mallori,
    Thanks for your help. You are right, I uninstalled and reinstalled LabVIEW 8.6 (update from LabVIEW 7.1) and reinstalled DAQmx 8.8. I still continue to have some problem that seem (to me) beyond compatibility issues. Here are the answers to your questions:
    1.  Before you reinstalled DAQmx 8.8, did you
    uninstall it? If not, then I  believe that the installer would see the
    driver already present and not actually make any changes.
    REPLY: No, I did not uninstall DAQmx 8.8. What do you recommend? Should I uninstall BOTH LabVIEW 8.6 and DAQmx 8.8 and then reinstall everything again? 
    2.  When you say that the VIs are not responsive,
    could you describe this a bit better? Perhaps post one of the error
    messages about compiling that you mentioned in your first post?
    REPLY: I am having a lots of "This SubVI is not executable" error messages in many of the library VI's not even mine. See the attached file.
    3.  If you open the NI Example Finder (Help»Find
    Examples) and the expand Hardware Input and Output»DAQmx»Analog
    Measurements»Voltage, are you able to run one of the example programs
    and see the correct values that you see in the Measurement and
    Automation Explorer Test Panels?
    REPLY:  I tried to runa couple of the examples for continuous voltage acquisition (internal clock) and both open with errors (see attachement).
    Thanks again for your help. I am looking forward to your recommendation.
    Regards,
    Peter
    Attachments:
    LV8.6-3.doc ‏43 KB

  • Why Mail does not work properly after updated to Mountain Lion?

    I updated to ML two days ago and my Mail is not working.  I can read but cannot reply because there is no cursor.  Restarted a few times, no change.  Anybody has the same problem??
    Rudh

    I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
    And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
    I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

  • New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

    Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
    https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
    Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
    point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

    I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it.  I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything. 
    When you say you can't reach OWA is that internally or externally?  As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
    with  Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
    Server. )
    Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
    https://mail.theirdomainhere.tld
    Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server. 

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • My Mac App Store on my MacBook Pro does not work properly.

    My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

    Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
    Good luck

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • Flashback Reclaimable Does Not Work Properly

    We saw the strange behavior of flashback reclaimable space as it does not work properly if the PERCENT_SPACE_USED of v$flash_recovery_area_usage is near to 100 (99.9x). As we are running Oracle 10gR2 (Cluster & RAC) to manage our production RAC database, it is a two node RAC. on IBM AIX 6.1
    Today at 9:00 AM, we observed that 97% reclaimable space was available. And db_recovery_file_dest_size is 460 GB out of 600 GB (mount point). No other process is being used this mount point for any IO, it is reserved for flashback only. We left 140 GB space free on mount point to over come any dynamic space requirement for flashback.
    At 10:00AM we received out of space message in alert log file and during 9:00 AM to 10:00 AM 10 to 15 archive logs were created and at 9:50AM some archive log were also deleted automatically by oracle server(default behavior). Please see the output below.
    FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
    CONTROLFILE 0 0 0
    ONLINELOG 0 0 0
    ARCHIVELOG 99.9 98 1520
    BACKUPPIECE 0 0 0
    IMAGECOPY 0 0 0
    FLASHBACKLOG 0 0 0
    It is really a strange behavior, please is there any one who face the same issue or what may be the reason for this ?
    regards,
    Edited by: user13656883 on Jul 18, 2011 11:27 PM

    Dear CKPT,
    we daily have 3 times archive log backup and after every backup we do crosscheck. as is mentioned earlier, 99% space was shown as used and but on the other hand 97% space was also shown as reclaimable. so on these bases we are very confused , why oracle behaves like this and throw error in alert log as below
    ORACLE Instance rac1 - Archival Error
    Mon Jul 18 09:59:08 2011
    ORA-16014: log 1 sequence# 39143 not archived, no available destinations
    ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
    Mon Jul 18 09:59:08 2011
    Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc0_3212156.trc:
    ORA-16014: log 1 sequence# 39143 not archived, no available destinations
    ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
    Mon Jul 18 10:04:13 2011
    Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc1_3277694.trc:
    ORA-19815: WARNING: db_recovery_file_dest_size of 493921239040 bytes is 100.00% used, and has 0 remaining bytes available.
    Mon Jul 18 10:04:13 2011
    regards,

  • IPhone 4s calendar does not working properly IOS 8.0

    Hello,
    after installing IOS 8.0 on iPhone 4s calendar does not working properly (is suspended). Could anyone advise ?
    Regards,
    Daniel

    You can zoom before you start taking a video, but not after you start the video. Sorry.

Maybe you are looking for

  • PofAnnotations in 3.7.1

    I built a bunch of tests for PofAnnotations, looks really good. Couple of small issues : Setter problem_ If you run the sample in the documentation with just @PortableProperty public String getSampleString() { return sampleString; }You get the follow

  • Relationship between CRMPAROLTP table(R/3) and R3AC6 transaction(CRM)...

    Hello Experts, In transaction R3AC6 where you maintain the middleware parameters, I maintained the 'PRICINGTYPE' value to 'G' and in table CRMPAROLTP in R/3, I added a new entry for 'PRICINGTYPE' also with a value of 'G'. Now, I am expecting that whe

  • Portuguese Suppliers Recapitulative Report

    Hi All, Please let us know the process of generating the Portuguese Suppliers Recapitulative Report I have done the Prerequisites as mention in R12-Oracle Financials For Europe User Guide But still the report is blank even after running the EMEA VAT

  • Code to genereate difference between succcessive dates in a table

    First create and Insert statements; create table schedule(iloan_code number , schedule_date date); insert into schedule values(1001, to_date('01-jun-2012')); insert into schedule values(1001, to_date('01-jul-2012')); insert into schedule values(1001,

  • Rounding in ABAP

    How can i round off a value in ABAP Program and use it for further calculation