IPhoto doesn't load after installing iLife '11

I needed to install iDVD off the iLife '11 disk I had, and it seemingly installed a previous version of iPhoto. How can I restore the iPhoto app that came with the MacBookPro?

Thanks - while refreshing the Updates tab I toggled between it and the Purchased tab. Under the Purchased tab it was listed and I could Install again.

Similar Messages

My iPhoto doesn't work after installing lion?

My Iphoto doesn't work after installing lion.
it suggest that I have to instal iphoto again.
where can I find this

If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

IPHOTO NO LONGER LOADS AFTER INSTALLING 10.4.10 on G4

After installing 10.4.10 on a G4 desktop, iPhoto no longer loads. When I try to rebuild library, the applications quits at the last instant. Any suggestions on how to fix or how to uninstall and get back to earlier system?

Hello young:
Hopefully you had a backup of your system prior to updating. Going "back" will probably not help as it it unlikely that OS X 10.4.10 caused the problem (it has been ouut for awhile, and no similar problems have been noted, as far as I know).
I suggest that you do several things:
Run repair disk from your software install DVD.
Run repair permissions from your internal HD.
If those do not help, download the combo OS X 10.4.10 and reinstall it.
Barry

IPhoto won't work after installing iLife '11

I installed iLife on both my work computer which is a '11 iMac and my personal computer is a '12 MacBook Pro. After installing I can't run iPhoto on either computer? When I try to open it on my computer it gives me a window that says "You can't open the application iPhoto because it may be damaged or incomplete." I've tried running updates and looking on forums that suggest 9.1 update but it will not allow me to upload it, it says I need a previous version? I'm not sure what is going on but it is very frustrating

Open Finder, go to Applications folder, delete iPhoto and reinstall it again. Finally, open  > Software Update and update iPhoto until you have iPhoto 9.4.1

My iPhone doesn't load after instaling iSO7

I have an iPhone 4s. Yesterday I updated iso7.0.3
After downloading finished it got restart and then automatically it asked me to connect it to iTunes. I connected it to iTunes which I had installed in my computer. but it asked me to download the iso7 again for the second time via iTunes.
The screen of my iPhone seems to be locked. No touch more works there. Only the guidance of (connect to iTunes) appear.
Hope you solve this problem.
Thanks

http://support.apple.com/kb/HT1808

Trial Captivate 7 doesn't load after install

Running Windows 7
Install seems to have run correctly. When I launch the program, it gets hung up on the splash screen and never opens.
Error message:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name:    AppHangB1
Application Name:    AdobeCaptivate.exe
Application Version:    7.0.1.237
Application Timestamp:    5288ee39
Hang Signature:    31b6
Hang Type:    0
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Hang Signature 1:    31b6aea5d745f21961e5da154a8428f4
Additional Hang Signature 2:    c700
Additional Hang Signature 3:    c7003c6780bbe73dcdb2cfd3890b3e40
Additional Hang Signature 4:    31b6
Additional Hang Signature 5:    31b6aea5d745f21961e5da154a8428f4
Additional Hang Signature 6:    c700
Additional Hang Signature 7:    c7003c6780bbe73dcdb2cfd3890b3e40

You'll need to give more details than this:
Home computer or corporate network?
If corporate, are you using roaming profiles or virtual My Documents folders?
What version of windows OS?
Launching the app with Run As Administrator?

I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc. The message I get says "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?!

I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.

Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

After installing ilife '11 when i opened iPhoto its display a message"You can't open your current photo library using this version of iPhoto, what can i do sir??

i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???

Make sure you are updated to the latest version - 9.2.1
LN

Getting the error, application may be damaged or incomplete after installing ilife.

Can't open iPhoto after installing iLife. System is telling me that it is damaged or incomplete. New to the Mac....what to do?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

External monitor no longer works after installing iLife '09

Before, the external monitor (Apple Cinema HD display) connected via DVI to Mini-DVI adapter was working fine. However, after installing iLife '09 and restarting, the iMac will no longer detect the external display attached to it. I even tried installing a different (but same model) display but it still will not detect.

I'm not sure how installing an application would cause that to happen. Have you shut down (powered off) the iMac completely, and then restarted, since this problem occurred?
Some display settings are stored in PRAM, so if you have not already, try resetting PRAM
http://support.apple.com/kb/HT1379
If that does not help, you can try disconnecting the iMac from power and reconnecting it, using the reset SMC (power management) procedure.
http://support.apple.com/kb/HT1543
When you reconnect it, initially connect the iMac to a wall outlet, by itself. Leave all peripherals disconnected, except for your USB keyboard/mouse. Make sure it is working properly, then connect only the external display.
If it still does not work, as a test, start up with your Mac OS X installation disc. You are not installing anything, but note if the second display is displaying the background image or not when you are booted from a different system.

After install iLife '11, iWeb does not show the picture

After install iLife '11 , I need to edit some pages of an existing website (stored on my HD)
When I open the page I would edit (it's a page that contains some photo gallery) I see that the picture gallery is empty and if I try to publish the page when I browse it I see the page appear but there's no picture gallery on it.
there's any solution ?
gabriele

Try the following:
1 - Go to your user account home folder, and open the library folder within it.
Look for the folder named "Calendars" and inside you might find a bunch of different folders with weird names. If they are there that means your calendars might not be lost.
2 - Look for the file "Calendar Cache". That file might be corrupted. Trash it. You may want to save a copy of it elsewhere. Once trashed, re-open ical. This should force it to rebuild its library based on those folders with weird names you saw. Your calendars should be back. Good luck

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

IPhoto cannot export video after installing Yosemite, HELP. It happens to my 2 MacBook Pros, 2 Airs and iMac.

iPhoto cannot export video after installing Yosemite.

You have a problem and yo need to solve it
If you want help you need to do more than state an abstract problem - we need details - what can't it? what makes you thing it can't? what errors occur? what are the symptoms?
Your post is like "my car won't start" - with no details it could be anything from having lost the key to gas - you have to provie details
LN

After install iLife '11 I get a "network connection failed"

After install iLife '11 , while I'm using iWeb a message pop up saying "Connection failed -- the server xxx could not be available ...." (the message appear in italian - I don't not in english how it sounds)
You can click OK but after half a minute the message appear again and so on.
there's any solution ?
gabriele

Gabriele ~ Are you publishing to MobileMe? ...Is the message you're seeing mentioned in this Apple doc:
http://support.apple.com/kb/TS1843?viewlocale=it_IT

PE 9 will not load after installing Elements 10

Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.

Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion

IPhoto doesn't load after installing iLife '11

Similar Messages

Maybe you are looking for