IPhoto downloaded photos into an event and now they don't show up. They were deleted off the camera under the assumption they were in my library now I don't have anything. Does anyone have any useful advice?
I downloaded photos from my camera to iPhoto 11. They were accepted as a new event. I deleted off the camera disk. Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...
You can recover the shots from the Card with an app like MediaRecover
As for the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Similar Messages
-
I have enabled homesharing in iTunes (from the advanced menu) and then used the same details when enabling homesharing on the Apple TV (settings > computers), but I still can't stream my itunes to ATV. Does anyone have suggestions to resolve?
I Am having the same issue. Ie on the password issue.
I Am using a Macpro though.
i Have had no issues with the setup until recently.
However I think the hard drive is starting to fail as it keeps on losing the wireless connection and gas been stuttering a lot on playback. -
Iphoto splitting photos into separate events
IPhoto used to have a selection to turn off autosplitting photos into events when importing. That option is gone. The best I can find not is to autosplit items into one event per week. Is there a way to do this (i.e. through the terminal) or is there a third-party option?
thanks!After looking around on the discussions I guess you're right about it not being an option, but I can tell you that I routinely import photos from our camera spanning multiple days (weeks even) without iPhoto autosplitting them into separate events. The autosplitting just cropped up today, and whether the older behavior was due to a corrupted preferences file or some other glitch, I want it back. I appreciate your orgainizational advice, but I simply do not care to work that way - I much preferred the old iPhoto 'camera roll' analogy and hate when iPhoto second-guesses me about how to organize my photos. Is there a way to force iPhoto to stop autosplitting?
Thanks! -
My phone is a Sony Ericsson Xperia X10.
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
iPhoto keeps crashing! - then needs to repair the library. This is happening each time I import photos or even try to go in to an even and delete photos etc. Does anyone have any suggestions? Please it is so frustrating - I used to love iPhoto - now I regret upgrading to Lion
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?
Hello, try kguy's solution here...
https://discussions.apple.com/thread/2332457?start=0&tstart=0
First, Go to System Preferences, keyboard, and click on the Keyboard tab
Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
The device should appear once again in your bluetooth list.
Try out the volume control buttons now, and see if that cleared things up -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
i've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?
Thank you. I put it in airplane mode like you suggested, but it looks to me like all the applications and ads are still running. Anyway, I'm just gonna play when I'm really really bored and use them as less as possible. Thank you again for your quick answer.
-
As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any suggestions on how I can resolve this?
Aha, a PPC Mac!
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a later version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html -
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!
Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck… -
How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.
-
Hi there. I just bought a new iMac. Used to have a pc. Plugged my nano into iMac and it transferred my purchases fine. Bought a new album on i tunes and it will not download to my nano. Does anyone have any suggestions? Much appreciated. Thanks.
You may not have the iPod's Music tab set up in iTunes, which is how you tell iTunes how to automatically sync your iPod.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Click on Music there.
To use automatic syncing, the checkbox for Sync Music is checked. Below that, you can choose to sync Entire music library, if it fits. Otherwise, you can choose to sync Select playlists, artists, albums, and genres.
With the latter choice, you can create a selection of songs to sync to the iPod by selecting (checkmarking) playlists, artists, albums, and/or genres on the Music tab. For example, you can make a playlist in iTunes with all the songs you want on the iPod. That new album needs to be on that playlist, if you want those songs synced to the iPod. On the Music tab, checkmark that playlist.
When you Apply the change, your selection of songs sync to the iPod (replacing its existing content). Going forward, any changes in the iTunes Music library that are related to your selection of songs on the Music tab sync automatically to the iPod when you connect it, or when you click Sync.
Therefore, if you create a playlist with songs you want on the iPod, and select it on the iPod's Music tab, you can simply update that playlist in iTunes (add and remove songs), and those changes sync to the iPod automatically at the next opportunity.
Maybe you are looking for
-
My camera in twist s230U after upgrade to win 8.1 show a diagonal cross line
After windows 8.1 update I am unable to use my camera for skype in my twist S230U and take a snap.It shows a diagonal cross line in the camera image but the camera light shows up,.getting click sound but camera could not take a picture or use video i
-
Hi All, I have a scenario in which i am purchasing material from a vendor and this is transported by another transport vendor. I need to set this scenario in SAP. Do i need to create 2 Purchase order one for material vendor and another for transporte
-
Looking for answers from someone OTHER THAN PETE, (who seems to have no life other than to troll the forums) to either help from a technical part of apple to disable certain updates that I cannot seem to turn off or a developer (or coding) for deleti
-
How to install X-Fi Autio Panel etc?
Hello Until recently I used windows XP, and after a clean install, I installed the updated XP audio driver from creative site, then the programs (Console Launcher, Audio Panel, THX options and whatelse I chose from the list). However, now I use windo
-
Crash in mmFree () from /opt/bea/jrockit-R26.4.0-jre1.5.0
Hi, Our telecom application is java based application using jrockit-R26.4.0-jre1.5.0_06. During tests, we've got the following crash. Unfortunatly no jrockit dump file was created (sorry about this). Did you already seen this crash? Thanks in advance