IPhoto & Elements11

Why can't I open photos from iPhoto directly into Photoshop Elements 11?

Most likely because you set the logical file as your external editor rather than the correct one. The actual editor is hiding inside the Support Files folder in the PSE 11 folder in Applications. You want this one:

Similar Messages

  • In iphoto11when I go to advanced preferences to choose an external editor (PSE11), the drop down menu just shows iPhoto and DSCF0586, which if chosen takes me to the desktop. How do I get rid of DSCF0586 and insert Adobe Elements11?

    In iphoto11when I go to advanced preferences to choose an external editor (PSE11), the drop down menu just shows iPhoto and DSCF0586, which if chosen takes me to the desktop. How do I get rid of DSCF0586 and insert Adobe Elements11?

    Click on DSCF0586 and then navigate to the PSE 11 application and select it.
    Be sure to select the right PSE 11 file, the one in the Support Files folder:
    OT

  • I have set up photoshop elements as external editor in iPhoto but I cannot get the edited photo to open in iPhoto. When I save the photo Elements asks where do I want to save it and iPhoto is not an option.

    I have set up Photoshop Elements11 as the External Editor in iPhoto just as Terence Devlin said. However when I save the edited photo it does not appear in iPhoto. A drop down menu asks where I want to save the photo and I do not know what to choose. Also should I choose, "save" or "save as"? I should be really grateful for your help.

    I suggest opening iPhoto and reverting back to iPhoto in the Preferences for photo editing. Quit iPhoto. Restart your Mac for good measure. Open iPhoto and again choose Photoshop Elements in Preferences as the editing app.
    As far as editing, I don't have PE, but I have another editing app form the Mac App Store, ColorStrokes. I have been experimenting with using it for editing iPhoto photos and it works flawlessly. After setting ColorStroke as the editing app, I open a photo in iPhoto and click the Edit button in the menu bar below the photo. Color Stoke immediately opens with the photo and I complete my editing. When I have finished editing I choose to Save the photo, leave the name the same and agree to replace the iPhoto photo of the same name. I quit ColorStroke and the photo in iPhoto now has all of my edits from ColorStroke.
    Should I decide that I prefer the original photo, I open the photo in iPhoto and choose Revert to Original in the Photos pulldown menu.

  • Photoshop/Iphoto problem

    Photoshop is not offered in the Preferences--Advanced--Edit menu. I have Photoshop Elements11 running on my MAcBook Air.  What's up?

    There should be two options in that menu: iPhoto and External Editor or an existing external editor. Select External Editor or whatever is the second option and to navigate to the Applications folder and select PSE 11 as shown in this screenshot:
    Otherwise you'll open the overall Elements applicaiton which then you have to tell it to open the editor, a big pain. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • I have been using Elements11 for almost a year. I am suddenly getting the message:Some of the application componentsare missing from the application directory. Please reinstall. I deleted old version, reinstalled on my Mac and now get this message:A requi

    I have been using Elements11 for almost a year. I am suddenly getting the message:Some of the application components are missing from the application directory. Please reinstall. I deleted old version, reinstalled on my Mac and now get this message:A required application library failed to load and the product cannot continue. I also get the first message again. Organizer works but not editor. Frustrated!

    What a waste of space to paste the code.
    Why not ask in the iLife > iPhoto forum where your question belongs.

  • Iphoto crashing after using mini-dvi to video adapter

    Hi, IPhoto on my Macbook is crashing. I can open it, then as soon as I scroll down it locks up and I have to force quit.
    This started happening right after I used a Mini-DVI to Video Adapter cable to hook my macbook up to my TV. The adapter/s-video connection worked and I was able to see the video on the tv. But iphoto immediately locked up the computer when I went to slide show and now it locks every time I open it.
    Any ideas?
    Thank you:)
    Dorothy

    It means that the issue resides in your existing Library.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Cannot open and update IPhoto after upgrading to OXYosemite

    From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID  This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
    What should I do?
    Thanks, Sev

    I have the same problem and can't find out how to correct it.  Unable to update iPhoto or iMovie .. I get the same message as above user.  Help!

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • IPhoto slideshow using mini-dvi to video adapter

    When using the mini-dvi to video adapter to connect to my widescreen tv (via composite), to show iPhoto slideshows, the transistions between slides dont apear and there are no ken burns effects. The slideshow runs fine on my MacBook display (ie when not conected to the tv), and the is no other distortion or flickering (as reported in other threads), this seems odd to me or is it just a limitation of analogue output.
    2Ghz MacBook, White   Mac OS X (10.4.7)  

    It means that the issue resides in your existing Library.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Cannot send email from within iPhoto

    Using OX X 10.7.5 cannot send email from within iPhoto.  I get this error message: "Your email did not go through because the server did not reply."
    If I change the preference to use email, everything goes fine but I lose the formatting feature.

    iPhoto Menu ->
    Preferences ->
    Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them. Check out the Stationery...

  • How can I restore an iPhoto library from Time Machine (ML) - when I TM doesn't see the backup??

    Hi,
    I recently did a Time Machine backup of my MacBook Pro (Mountain Lion) onto an external HDD. Around the time of the last backup, my system was behaving funny so I decided to rebuild the OS X.
    Because the last TM backup was of a system that as mentioned, was somewhat 'unstable', and I only had a few backups available (didn't have TM running too long beforehand) - I decided not to use TM to 'restore' my system. I just did  a clean install of ML and planned on pulling files over manually. I'd done this before and it worked a treat.
    This time ran into a snag. The backup disk TM used was an external HDD which I wanted to upgrade (suffice to say it works fine). So, I needed to move the backup.backupdb directory to my other HDD. The copy seemed to work fine ... so far so good.
    I installed the new ML OS on my MacBook Pro and that was fine too. I was able to pull most of my files over by going into the TM backup and copying what I needed.
    BUT, for some reason, this didn't work for the iPhoto library?
    Alas, I found that you need to do a 'restore' iPhoto library file from whithin TM. So I fired up TM and noticed that it didn't recognise the old backup file located on the HDD. I.e. when I turned on TM, pointed it to the external HDD (where I copied the previous backup to), it started a fresh backup.
    So ... my question is - "How do I restore the iPhoto library if I can't get to it from TM?"
    Thanks in advance to anyone that can help! The last 15 years of photos are stored in this library!

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • I am trying to move my wife's iPhoto '08 library to my new iMac for iPhoto '11.

    I am trying to move my wife's iPhoto (2007) library on a Macbook to my new iMac for iPhoto '11.  First, when I opened iPhoto on the iMac it asked me to create a library, which I did.  Then I imported her photos via a wireless network to my "new" library.  However, when it finally finished importing, it had imported 3 copies of each photo from her library.  I deleted the "new" library and started over.
    Second, I opened iPhoto on the iMac and chose to use "other library."  I chose my wife's shared iPhoto library and it began transferring the photos to the new iMac (or so I thought).  This worked beautifully as it only brought over single photos and not 3 copies like discussed above.  After editing the new library and adding some photos from an old PC, I shut down iPhoto.  A few hours later I tried to open iPhoto on the iMac and it gave me the opening screen again with choices to create a new library or use a different library.  As it turns out, my wife's Macbook and been disconneted from our wireless network.  I was able to figure out that that unless my wife's Macbook is connected to the network then I cannot access the iPhoto library on my iMac.  I was under the impression that I had copied her library to my computer and that the photo files were now on the hard drive of the iMac.  So when her computer is offline I can no longer access the imported library.  I want her library to stay on the iMac as we plan to sell her Macbook.  As you now know, we cannot access her iPhoto library on the Macbook since she is running an older version of iPhoto.
    So, what I would like to do is to completely transfer the photos from her Macbook to my new iMac and be able to access them on the iMac regardless of whether she is on the network or not because we plan to sell her Macbook to a friend.  Thank you for any help you can provide.

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    and select the Library that you moved.  That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    Your second option didn't work because you simply referenced her library on the old machine.
    Regards
    TD

  • Help! iPhoto crashes every time I try to open and view photos.

    Every time i try to open iPhoto it unexpectedly shuts down. Here is the begining of the problem details:
    Process:         iPhoto [242]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.2.1 (9.2.1)
    Build Info:      iPhotoProject-628000000000000~1
    App Item ID:     408981381
    App External ID: 4641130
    Code Type:       X86 (Native)
    Parent Process:  launchd [85]
    Date/Time:       2012-10-08 20:14:46.383 -0700
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          39160 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  33204 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      53C12CB1-C934-4FA2-AEEC-E1FD1CA80E12
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: 0x000000000000000a, 0x0000000022763000
    Crashed Thread:  33
    Thread 0:  Dispatch queue: com.apple.main-thread
    0   libSystem.B.dylib                       0x958b3aa2 __semwait_signal + 10
    1   libSystem.B.dylib                       0x958b375e _pthread_cond_wait + 1191
    2   libSystem.B.dylib                       0x958b53f8 pthread_cond_wait$UNIX2003 + 73
    3   com.apple.Foundation                    0x92852a1c -[__NSOperationInternal waitUntilFinished] + 55
    4   com.apple.Foundation                    0x928529cd -[NSOperation waitUntilFinished] + 89
    5   com.apple.iPhoto                        0x0081482e 0x1000 + 8468526
    6   com.apple.iPhoto                        0x00067d7c 0x1000 + 421244
    7   com.apple.iPhoto                        0x000664ce 0x1000 + 414926
    8   com.apple.iPhoto                        0x0007ab9d 0x1000 + 498589
    9   com.apple.iPhoto                        0x000280cc 0x1000 + 159948
    10  com.apple.iPhoto                        0x00021e2f 0x1000 + 134703
    11  com.apple.iPhoto                        0x00021331 0x1000 + 131889
    12  com.apple.iPhoto                        0x000a4bcf 0x1000 + 670671
    13  com.apple.iPhoto                        0x00084c07 0x1000 + 539655
    14  com.apple.iPhoto                        0x00246d6c 0x1000 + 2383212
    15  com.apple.iPhoto                        0x000349fc 0x1000 + 211452
    16  com.apple.Foundation                    0x9280ddb3 _nsnote_callback + 176
    17  com.apple.CoreFoundation                0x94bea763 __CFXNotificationPost + 947
    18  com.apple.CoreFoundation                0x94bea16a _CFXNotificationPostNotification + 186
    19  com.apple.Foundation                    0x92802c50 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128
    20  com.apple.Foundation                    0x9281005d -[NSNotificationCenter postNotificationName:object:] + 56
    21  com.apple.AppKit                        0x938d5216 -[NSApplication _postDidFinishNotification] + 125
    22  com.apple.AppKit                        0x938d5126 -[NSApplication _sendFinishLaunchingNotification] + 74
    23  com.apple.AppKit                        0x93a2c339 -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 274
    24  com.apple.AppKit                        0x93a2bf59 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 101
    25  com.apple.Foundation                    0x928431f8 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 511
    26  com.apple.Foundation                    0x92842fbc _NSAppleEventManagerGenericHandler + 228
    27  com.apple.AE                            0x91ce5f5c aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
    28  com.apple.AE                            0x91ce5e5b dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
    29  com.apple.AE                            0x91ce5d65 aeProcessAppleEvent + 197
    30  com.apple.HIToolbox                     0x942be197 AEProcessAppleEvent + 50
    31  com.apple.AppKit                        0x938a57d2 _DPSNextEvent + 1420
    32  com.apple.AppKit                        0x938a4dd6 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    33  com.apple.AppKit                        0x938671f3 -[NSApplication run] + 821
    34  com.apple.AppKit                        0x9385f289 NSApplicationMain + 574
    35  com.apple.iPhoto                        0x0001159a 0x1000 + 66970
    36  com.apple.iPhoto                        0x00010a29 0x1000 + 64041

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Help! I am making an iPhoto book and all of a sudden it will not open and I get a huge error message which is supposedly sent to Apple.  How do I access that site????

    Mac osX 10.6.8
    iBook - old version
    can not access Safari - going through Chrome
    All of a sudden my IBook would not open (100 pages and almost finished)
    Error message sent to Apple - how do I access them??????
    Thank you for any help you can give me
    <Email Edited by Host>

    Do you mean, you have been creating a Photo Book in iPhoto? Or an iBook in iBook Author?
    If you are asking about a photo book in iPhoto, what was the last you did in iPhoto, before the crash happened?  Did you add a page with a map?
    Then you may have a problem with a bug, where adding a route to a map may render the book unreadable.  In that case the best option is to restore the iPhoto library from the last backup you made, before you added the map to the book.
    It is not possible to open the book and to delete the unreadable page. You can only delete the book and start over, if this bug is the reason for the crashes. See for example this link:  Getting rid of problem photo book

Maybe you are looking for

  • No data in a field

    Hi   Data is not loaded into a particular field "0Complaint".   Checked the cube,ODS,PSA...the field is also active. Kindly tell me how to solve it Thanx & Regards

  • Can I preset the default save feature in Acrobat 10 to save a MS Word document as a "REDUCED SIZE PDF"?

    I use MS Word for Mac 2011 to create documents and quotations. I'm using Adobe Acrobat Pro 10.1.12 on a MAC. I want to save the MS Word file as a "REDUCED SIZE PDF" first, without having to first save it as a normal PDF, then re-save it as the reduce

  • Enhanced recieverdetermination Using XSLT

    Hi all, I'm using an XSLT (and som java look up) to determine my receivers. I have imported the Java-file and XSLT to my imported archives and all. The question is were to use the XSLT in order to do the Receiver mapping? (mapping program, interface

  • How do I get Dolby digital live or DTS connect to work?

    I have the sound blaster Zx sound card and the logitech z906 5.1 surround speaker system. I am connecting to the speakers via optical cable. I figured Dolby digital live and/or DTS would sound great with this set up, only problem when I turn on eithe

  • Overview of SQL Processing

    Hello All, Can you please briefly explain with examples for Overview of SQL Processing. We have following stages in SQL Processing.Please brief with examples on below topics. SQL Parsing SQL Optimization SQL Row Source Generation SQL Execution Thanks