IPhoto error message, wont display on my iMac G4 iPhoto4.0.3

I took a Pro Care lesson today so that I could transfer pictures I had placed on my wife's lap-top iBook to my iMac. It was told to burn the photos to a disc and run the disc on my iMac. Unfortunately my computer had an older version of iPhoto. The disc would not run on my machine and an error note appeared stating that I needed to get a newer version of iPhoto. Now I cannot even display my library and an error message appears saying that since I changed something (the only change was trying to run the disc) I would now need a newer version of iPhoto to display my library. Is there any way to go back to my library and any other way to transfer the pictures on my wife's machine to mine?

Marvw,
Remove the disc from your iMac. Quit iPhoto. In Finder, look in Home/ Library/ Preferences for a file called com.apple.iPhoto.plist. Move it to your trash. Launch iPhoto. Does your library open normally?
If so, skip this paragraph. If not, close iPhoto. Hold down the Shift and Option keys while launching iPhoto. Do not release until you can confirm the intent to rebuild. Click "yes," then wait for it to work. Does your library open after the rebuild?
If not, you'll have to do a manual rebuild. Do you have a backup of your library?
That error message often comes up when trying to import with a disc in your disc drive. What you can do is leave iPhoto closed and copy the disc to the desktop on your hard drive. Then remove the disc from the disc drive. iPhoto is not forward compatible, so your older version can't read the library created by the newer version. You will have to take your wife's pictures from the library and import them into your library. Her Albums, keywords, titles, and other metadata will not transfer to your library. Do not import items inside the folder called "Thumbs" or "Thumbnails" because they are smaller versions of photos in her library.
Since you want your wife's photos in your older iPhoto library, there is an easier way to make the disc. On her iBook, select all the photos in her library. Then Export them to a folder on her desktop. Use the Finder to burn that folder of photos to the disc. This will give you just the full-sized, edited (if there is an edited version) photos from her library. You can then import them to your iMac's library. If iPhoto won't import directly from the disc, copy it to your desktop, remove the disc, and import from that folder.
Post back with results, and we'll go from there.

Similar Messages

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • No error message is displayed while deleting an attendee from a course.

    Hi Experts,
    Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right:
    1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in
    a course.
    2)Right-click on his name and select cancel
    3)Click the dustbin to remove
    But nothing is happening, neither the employee is getting moved from the course nor any error message is displaying giving us any indication of what can go wrong. Can you please suggest what can be the possible problem?
    Strangest thing is, this problem is occuring only for one employee.
    Thanks and Regards,
    Toa

    Hi Manoj,
    Thanks for your reply.
    That is the problem, no error message is showing. When the delete button is pressed, neither the attendee is getting deleted nor any error message is displaying as of why the deletion is not occuring.
    FYI: The employee is not locked.
    Thanks,
    Toa

  • Error messages are displayed when opening the RTV form.

    Hi All,
    While doing a return to vendor the following error messages are displayed.
    1.Go to the Inventory Management --> Return to Vendor screen.
    2. In Action Drop down select ‘New’ and click on OK
    3. A series of errors are encountered.
    4. A warning message as [640+49> 688] and then click ‘OK’.
    5. Notice the error message”Multi view internal error: B_RTV_DETAIL.QTY_RETURNED:current_col_pos exceeds parameter defined maximum right position” and then click’ OK’.
    Can any one help me out in these?
    Thanks,
    Sushanth.D

    This is a coding issue in the form, maybe the number is too big for the box on the canvas.
    It looks also like a business issue is kicking off the error, the message [640+49> 688] looks like some units of stock etc. check, e.g. the returned quantity is larger than the stock on hand.
    File an SR with OracleSupport and/or open the UI's Form fmb code in Forms Developer.
    Multi View relates to an (quite old) OracleRetail (Retek) Forms pll library that enhances the Forms features, if my memory is not letting me down.
    Best regards,
    Erik

  • UI error message when displaying Account Factsheet.

    When I view the factsheet in the UI I get the following error message:
    Cannot display view BSP_DLC_FS/factsheet of UI Component BSP_DLC_FS
    An exception has occurred
    Exception Class     CX_BSP_WD_INCORRECT_IMPLEMENT - Window 'SalesOrgSelectorWindow' is not defined in the component 'BP_FACTSHEET'
    Method:     CL_BSP_WD_COMPONENT_USAGE=>GET_INTERFACE_VIEW_CONTR
    Source Text Row:     28
    Cannot display view BSP_DLC_FS/factsheet of UI Component BSP_DLC_FS
    An exception has occurred
    Exception Class     CX_BSP_WD_RUNTIME_ERROR - View BP_FACTSHEET0002.SalesOrgSelectorWindow in component BSP_DLC_FS could not be bound
    Method:     CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
    Source Text Row:     165
    If I look at the BP_FACTSHEET component and the the window ''SalesOrgSelectorWindow' is defined and is active though.
    Can anyone make any suggestions as to the cause, or maybe things to check.
    Jason

    CRM 7.
    I was planning on performing a restore of the CRM dev system from the previous day, but then discovered that the Repository.xml was missing, or almost empty. This was the SAP standard .xml file, so I copied/pasted from our Sandpit CRM system, then everything worked. That may not have fixed the problem completely though, I'm just trying to see if there are any more issues. One of the symptoms was that when I entered the BSP component workbench there was no BOL Model Browser tab, but the Component structure browser and Runtime Repository editor was there.
    I'll check everything now and will ensure that all is okay, but on the plus side we can now display the factsheet in full within the UI with no errors. I'm beginning to think that perhaps CRM 7 is not as stable as I first thought. What action would blitz the Repository in this way and leave you with a non-working system I wonder. Also, at what point does the repository.xml get updated when changes are made, like when new viewsets added etc.
    Regards
    Jason

  • Prevent that error messages are displayed twice

    Hi All!
    How can I prevent that error messages are displayed twice.
    The FuBa is called at the backend more than one time (at least twice)
    therefore I get every message twice.
    Regards
    sas

    Sas-
    I'm not sure if I understood your problem. Are you saying that you have a service which you call in a loop, and display the error message in the loop as well? If so an option would be to have a [HashMap|http://java.sun.com/j2se/1.4.2/docs/api/java/util/HashMap.html] where the key is the error message id, and the value is the error message. In the loop check if the error message id returned by your service already exists in the map and add it only if absent. Then after your loop is complete use the MessageManager to display your consolidated error messages.
    Cheers-
    Atul

  • Iphoto error message: unable to assemble book

    iphoto error message: "unable to assemble book" when i'm trying to place an order.

    Boot into Safe Mode,  Mac OS X: Starting up in Safe Mode, and create a preview copy as described in this Apple document,  .  If that is successful preview the PDF copy before ordering the book from the Safe Mode.
    Keep the PDF  file to compare with the printed copy when you receive it.
    By any chance are you ordering an XL sized book?
    OT

  • Infopath 2013 generic error message that displays

    In an InfoPath 2013 custom form that I created, I have several columns that are required. If the user does not enter all the data that is required, the automatic generic error message is displayed.
    I would prefer to make the error message that is more 'user friendly'. Thus can you tell me if there is a way to make the error message more user friendly? If so, would you tell me how to make the message more user friendly?
    The generic error message that is automatically displayed is:
    'InfoPath cannot submit the form because it contains errors. Errors are marked with either a red asterisk (required fields) or a red, dashed border (invalid values). use ctl+shift+O to go to the next error. Use ctl+shift+I to view error details'.
    Thus can you show me how to make this error message more user friendly in InfoPath 2013?

    Hi Wendy,
    All the error messages for the InfoPath form errors are stored in the intlcorestrings.js file which is located in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\INC.
    If you want to modify the error messages, then you can modify that file to change the corresponding error message.
    Per my knowledge, the error you want to customize is IntlCoreStrings.k_strSubmitBeforeErrors and IntlCoreStrings.k_strSaveSubmitErrorInformation.
    You can change the two lines.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Iphoto error message & poss virus?

    My iphoto keeps displaying the error message "The volume for “***.JPG” cannot be found. It displays the thumbnail but can't/won't display the photo itself. This doesn't affect all photos in iphoto but affects groups taken at the same time. If I plug in the original memory card I can access the full photo but unplug it & I'm back to just the thumbnail with error message.
    My operating system is Mac OS X Version 10.7.5 and iphoto '11 Version 9.2 (626).
    Can anyone help please?

    You have one or more links to a disused volume in the iPhoto library. Since the volume is no longer accessible, those links are now invalid. You should be able to find them by a tedious process of elimination. First, back up all data.
    Select about half of your photos and start to drag them. Don't actually move them anywhere; just drag them a little and release. If you get the warning, then some of the photos you selected are invalid links. Narrow down the selection. If you don't get the warning, select the other half of the library.
    When you've isolated the invalid items, delete them and then select
              iPhoto ▹ Empty iPhoto Trash
    from the menu bar. Finally, rebuild the iPhoto library.
    (Credit for this idea to Winston Moy of winstonmoy.com.)
    In some cases, the above procedure may not work. Then you'll have to create a new library with the contents of the existing one. The easiest way to do that is with a third-party application called "iPhoto Library Manager," which you can find in a web search. From the application's menu bar (not the iPhoto menu bar), select
              Library ▹ Rebuild
    Books, calendars, and slideshows won't be preserved.

  • Error message while displaying a Workbook in Portal

    Hello,
    We have a Workbook with 5 Queries in ech sheet. When we open the Query from Portal it displays the error message that
    1. Query was changed! Characterisitc no longer exists
    2. Invalid filter on CUST_SD: Filter changed
    I opned the Workbook directly from Analyzer and it did not display the error message.
    Thus it seems to be a change required in Portal side or may be some property of the Workbook.
    Please let me know your opinion to fix the error.
    Regards,
    Nitin S.

    Can you define "sometimes" a bit more?
    Is it after a number of runs of a report?
    Is it on a particular report?
    Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
    Can you duplicate the issue if you isolate the report to a new test app?
    Did you happen to notice if the issue existed prior to FP 3.5?
    Is this on your dev computer or a client computer?
    OS?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Error Message Repeated Display When using BBP_DOC_CHECK_BADI

    Hi,EveryOne,
        Who can help me,I am using BBP_DOC_CHECK_BADI,Check the item's,when the first time,i modify some PO item data,then through this BBP_DOC_CHECK_BADI,can show one error message.Then i modify the error data to correct,push the check button,no error message show again.
         Then i go into the second item,check,no error message.
         And there only two item.
         So, i Save the order.But the first error message display again.
         I don't know why? Is there have any one can help me.I am will very appreciate him.
        Thanks a lot.
    The code display:
            DATA:l_destination TYPE rfcdest.
            DATA:lt_ekbe TYPE TABLE OF zgp_invoice_check,
                 ls_ekbe TYPE                 z_invoice_check,
                 lt_ekpo TYPE TABLE OF z_invoice_po,
                 ls_ekpo TYPE                 z_invoice_po.
            CLEAR:l_destination.
            CHECK po_header-be_log_system IS NOT INITIAL.
            MOVE po_header-be_log_system TO l_destination.
            CALL FUNCTION 'Z_INVOICE_PRICING_CHECK'
              DESTINATION l_destination
              EXPORTING
                pi_ebeln = po_header-be_object_id
              TABLES
                pto_ekbe = lt_ekbe
                pto_ekpo = lt_ekpo
              EXCEPTIONS
                OTHERS   = 1.
            IF lt_ekbe[] IS NOT INITIAL.
              SORT lt_ekbe BY ebeln ebelp.
              LOOP AT po_item INTO ls_po_item.
                READ TABLE lt_ekbe INTO ls_ekbe WITH KEY ebelp = ls_po_item-number_int.
                IF sy-subrc EQ 0.
                  READ TABLE lt_ekpo INTO ls_ekpo WITH KEY ebelp = ls_po_item-number_int.
                  IF sy-subrc EQ 0 AND ls_ekpo-netpr NE ls_po_item-price.
                    ls_messages-msgty = 'E'.
                    ls_messages-msgid = 'BBP_PU'.
                    ls_messages-msgno = '001'.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
                      EXPORTING
                        input  = ls_po_item-number_int
                      IMPORTING
                        output = ls_po_item-number_int
                      EXCEPTIONS
                        OTHERS = 1.
                    CONCATENATE 'Line No.' ls_po_item-number_int ': ' 'Price cannot be changed for invoice item!'
                           INTO ls_messages-msgv1.
                    CONCATENATE 'Line No.' ls_po_item-number_int ': ' 'Price cannot be changed for invoice item!'
                           INTO ls_messages-message.
                    APPEND ls_messages TO et_messages .
                  ENDIF.
                ENDIF.
              ENDLOOP.
            ENDIF.
    Edited by: andy zhou on Apr 10, 2008 3:51 AM

    Hi
    Which SRM version are you using ?
    All the Data after makning changes in the PO document, will be also aviavale in BBP_DOC_CHANGE_BADI for the filter type- BUS2201 (Purchase orders) in your case. You can either do a validation there using BBP_DOC_CHECK_BADI.
    The  Business Add-Ins [BADI] - BBP_DOC_CHECK_BADI should be used for customer messages to be triggered ->
    Re: Error message control for invoice w/o PO in SRM
    Re: calling a screen from BADI BBP_DOC_CHECK_BADI
    Re: PO Message
    Re: Problem with BBP_DOC_CHECK_BADI 
    Re: Mandatory field
    Re: "Refresh" button in BBP_POC calls badi..... ?
    Re: Validation of SC/PO
    Re: PO Changes, PO date
    Do let me know, incase still face any issues.
    Regards
    - Atul

  • Error message not displayed in a pop up

    Hi ,
    I have a pop up screen in my web dynpro  with a input field and two buttons.
    i have a error message written in the WDDOBEFOREACTION method of my pop up window. But the message is not displayed on the window. But If the same is written in the event handler of the button click it is triggered.
    Please help me to display the message with the code in WDDOBEFOREACTION method  .
    The code is as below
    lo_nd_bp_data = wd_context->get_child_node( name = wd_this->wdctx_bp_data ).
    * get element via lead selection
      lo_el_bp_data = lo_nd_bp_data->get_element( ).
    * get single attribute
      lo_el_bp_data->get_attribute(
        EXPORTING
          name =  `BP_NUMBER`
        IMPORTING
          value = lv_bp_number ).
      CHECK lv_bp_number IS NOT INITIAL.
      IF zcl_rms_webdynpro_texts=>check_for_victim_bp( i_bp_number = lv_bp_number ) = abap_true.
    * get message manager
        DATA lo_api_controller     TYPE REF TO if_wd_controller.
        DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
        DATA: lv_p1 LIKE syst-msgv1.
        lo_api_controller ?= wd_this->wd_get_api( ).
        CALL METHOD lo_api_controller->get_message_manager
          RECEIVING
            message_manager = lo_message_manager.
        lv_p1 = lv_bp_number.
    * report message
        CALL METHOD lo_message_manager->report_t100_message
          EXPORTING
            msgid                     = ZMSG_CLS
            msgno                     = '222'
            msgty                     = 'E'
            p1                        = lv_p1
            cancel_navigation         = abap_true
            enable_message_navigation = abap_true.
      ENDIF.
    Edited by: SAP LEARNER on Jan 5, 2012 1:37 PM

    have a error message written in the WDDOBEFOREACTION method of my pop up window. But the message is not displayed on the window. But If the same is written in the event handler of the button click it is triggered.
    strange..
    wddobeforeaction will trigger then event handler wil trigger then wddoafteraction will trigger.
    Did you put a break point in wddobeforeaction?
    Regards
    Srinivas

  • Error message getting displayed in testing system not in development system

    Hi All,
    I am working on BW 3.5 BEx Query Designer.
    I have transported my queries to quality system twice as there were few changes in the variables.
    now after the second transports, when I execute the queries in quality system I am getting one error message at the top of report output stating "variable name" does not exist.
    I am not able to trace out why the error message is getting displayed while query is working fine in quality system.
    If it is due to some variable that has been removed or deleted....will it impact on production move?
    how to resolve this problem?
    Please provide me some inputs.
    Thanks,
    Rashmi.
    Edited by: Rashmi on Aug 6, 2008 1:29 PM

    Rashmi,
    Once again Create transport request in RSA1 ans while creating it you need to collect the all the query element.
    Transport it again into quality and do the testing as per the business requirment
    It would help to resolve the issue

  • Error message not displayed - Downloading files in a table

    Hi!!!
    I'm following the guide to download files onDemand in a table, you can find that guide at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f
    If found a problem with the guide: What would happen if there's an error while downloading or somenthing else? There the author doesn't explain how to show an error in the view.
    What I'd like to do is to show a error message in the view where the table is.
    I tried to add some code, but it doesn't finally show the error message.
    I have a method that generates the file and returns the path of the file in the context, so I can read it. It return boolean (true if the file was generated, false on the contray). That method is called executeZgav_Sf_Formulario_Sv_Input(nroEmpleado, nroViaje, morei, datosEspejo); and is working fine.
    I also have a static class that reads a file and returns the byte[] called: ManejoArchivos.getByteArrayFromResourcePath(wdContext.currentOutput_FormularioSVElement().getP_Path(), true);
    But if for example, the parameters are incorrect and the file cannot be generated, the method is supposed to show an error but is not displayed on the screen.
    I have some code after that which validates if the file could be read or not and returns the bytes of a prewritten PDF file with an error message.
    Added code:
              byte[] r = null;
              boolean continuar =
                   this.executeZgav_Sf_Formulario_Sv_Input(nroEmpleado, nroViaje, morei, datosEspejo);
              if (continuar)
                   try {
                        r =
                             ManejoArchivos.getByteArrayFromResourcePath(
                                  wdContext.currentOutput_FormularioSVElement().getP_Path(),
                                  true);
                   } catch (FileNotFoundException e) {
                        wdComponentAPI.getMessageManager().reportMessage(
                             IMessageData.ARCHIVO_NO_ENCONTRADO,
                             null,
                             true);
                   } catch (IOException e) {
                        wdComponentAPI.getMessageManager().reportMessage(IMessageData.PROBLEMA_IO, null, true);

    Hi Alejandro,
    Try This.
    try
    catch (FileNotFoundException e) {
    wdComponentAPI.getMessageManager().reportException("Given FileNotFoundException : "+e.getMessage(),true);
    catch (IOException ex) {
    wdComponentAPI.getMessageManager().reportException("Given IOException : "+ex.getMessage(),true);
    Re: How to display which exception Is Raised?
    Regards,
    Mithu

  • How to get DML error message to display

    Hi -- I have a report/form combination. When the user creates a record in the form, or cancels, the app branches back to the report results, properly displaying the success or error message from the form page.
    When the user updates or deletes a record in the form, a second form is branched to. This form (a dynamic form), allows the user to enter a comment for deleted or updated records, which are archived to a separate table. The success and error messages are set in this form to an app item called DML_RETURN_MSG. The page process that saves the archive comment sets the value of DML_RETURN_MSG properly: it is visible in the session state.
    This form then branches back to the report results, but the DML_RETURN_MSG is not displayed. I've compared the definition of both forms very closely, and see nothing obvious that would be causing this.
    Is the problem that the first form is a DML form, while the second is dynamic? How can I get the DML_RETURN_MSG to display?
    Thanks,
    Carol

    Carol,
    How are you referencing the DML_RETURN_MSG item in the (success? or error?) message? This is done by enclosing the item name in ampersand and period:
    This is a success message: &DML_RETURN_MSG.
    However, I assume you already know that.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

Maybe you are looking for

  • How to burn install snow leopord on dvd

    hi my question is that how to burn install updated snow leopord to dvd i heard some one its possible iam new for mac little help me plz , has been using snow leopord just 6 months

  • MySQL query works fine for Debug mode not during regular run mode

    Hello fellow Java gurus, I'm very much confused at the moment. I have an Java application that populates and accesses a MySQL database. It's a little complicated to explain but basically I've got a few threads that manipulate it. The database itself

  • Lot Size "WB - Weekly Lot Size"

    Dear All, I have selected lot size "WB - Weekly Lot Size" for a material. The Planned week start day is Monday in planned calender. If i run MRP for the above maintained material it is not flowing the requirment and it is not combined on Monday, it i

  • Where have all the buttons gone...?

    I am extremly missing the equalizer- and visualizer button! I don't care that they even cut away the ministore - but those other were pretty useful. And why?? There is enough space for them left! Quatschkram. Liked the old interface better.

  • I LOST MY SERIAL NUMBER ADOBE PHOTOSHOP LIGHTROOM 5

    JUST I NEED HELP WITH MY SERIAL NUMBER