Iphoto error with installation

I need help and will appreciate it! iphoto became inactive and I had to delete and re-install the software ilife 11 to no avail! After some reseach I discovered that I need to download and install the patch to resolve the problem. I downloaded the patch iphoto update 9.4.2 and when installing the patch I received an errod code 4960 please below screen print and assit me resolve this.
Thanks & regards,
Jakkie

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

Similar Messages

  • HELP! Fatal error with Installation

    I keep getting a fatal error with installation of version 7.6. I've uninstalled and installed it several times with the same problem. I have tried installing a older version again and now I'm getting the same error. Help!!

    Hi Jorge,
    I am sorry to hear that.
    Here are a few things that I suggest you try:
    Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
    If you have Windows Process Activation service installed on the machine, uninstall it.
    Open required RPC ports.
    More information for you:
    Service overview and network port requirements for Windows
    http://support.microsoft.com/kb/832017#method7
    If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
    Regards,
    Amy

  • Errors with Installation of OER 11.1.1.5

    All
    trying to install OER 11.1.1.5.
    The installation works fine, including Db setup. schema install etc..
    Installing a base domain with the config.sh also works no problem at all
    But when I try to create an OER domain (not extending an existing domain, haven't tried that)
    the domain creation fails with a jython script error.
    I'll get the details and append this post, but I was wondering if this was
    a known problem
    Environment : Oracle Enterprise Linux R5U4 - 32 bit
    On Virtual Box VM 4.08
    WLS 10.3.5
    sun 1.6 jdk
    heres the log output 2011-05-22 20:42:47,915 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /home/u01/Oracle/middleware/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
    2011-05-22 20:42:47,939 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.4.0 [home/u01/Oracle/middleware/wlserver_10.3/common/templates/domains/wls.jar]
    2011-05-22 20:43:12,695 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
    2011-05-22 20:43:12,698 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2011-05-22 20:43:13,449 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.5.0
    2011-05-22 20:43:13,453 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
    2011-05-22 20:43:13,623 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2011-05-22 20:43:13,695 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
    2011-05-22 20:43:13,695 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.5.0
    2011-05-22 20:43:13,696 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.5.0 to WebLogic_Server_10.3.5.0_wlserver_10.3_ORACLE_HOME
    2011-05-22 20:43:13,724 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
    2011-05-22 20:43:13,734 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
    2011-05-22 20:44:44,248 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
    2011-05-22 20:44:56,840 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
    2011-05-22 20:44:56,843 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
    2011-05-22 20:45:02,869 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
    Traceback (innermost last):
    (no code object) at line 0
    SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
    at org.python.core.parser.fixParseError(Unknown Source)
    at org.python.core.parser.parse(Unknown Source)
    at org.python.core.Py.compile_flags(Unknown Source)
    at org.python.util.PythonInterpreter.execfile(Unknown Source)
    at org.python.util.PythonInterpreter.execfile(Unknown Source)
    at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
    at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
    at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
    at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
    at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
    at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
    Edited by: michael_j_quinn on May 24, 2011 4:48 AM

    Hi Guys
    Is no one using OER ??

  • Error with Installation of SAP R/3 4.6C on Windows 64 Bit

    Hi,
    we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
    DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
    Cannot connect to DB, rc = 8192
    Can some one help me?
    What is the user connecting during the installation?
    Thank you!

    File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
    Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
    You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
    10=DATABASEINSTANCE_NT_MSS
    20=DBCOMMONDBENV_NT_MSS
    30=CALCRAM_NT_MSS
    40=CDSERVERBASE_NT_MSS
    50=OSGROUPSAPLOCAL_NT_IND
    60=OSGROUPSAPLOCALADMIN_NT_IND
    70=OSGROUPSAPGLOBAL_NT_IND
    80=OSUSERSIDADM_NT_IND
    90=OSUSERSIDADMPASSWD_NT_IND
    100=OSUSERSIDADMRIGHTS_NT_IND
    110=DBOSUSERMSSXP_NT_MSS
    120=DBOSUSERMSSXPPASSWD_NT_MSS
    130=GETDBSIZEKEYS_IND_IND
    140=DBBUILDTEMPDB_NT_MSS
    150=DBBUILD_NT_MSS
    160=DBPOSTBUILD_NT_MSS
    170=DBPRELOAD_NT_MSS
    180=DBMULTISCHEMA_NT_MSS
    190=DBDBSLTESTCONNECT_NT_IND
    200=DBR3LOADEXECDUMMY_IND_IND
    210=DBR3LOADEXEC_NT_MSS
    220=DBR3LOADVIEWDUMMY_IND_IND
    230=DBR3LOADVIEW_NT_IND
    240=DBPOSTLOAD_NT_MSS
    250=DBCONFIGURATION_NT_MSS
    260=DBPROCEDURES_NT_MSS
    270=DBR3LICENSECREATE_NT_MSS
    280=DIPGNTAB_NT_IND
    290=EXITMNLSSTARTR3_NT_IND
    300=RFCRSWBOINI_IND_IND
    310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND

  • Problem with running the midlet class (Error with Installation suite )

    hi everyone...
    i have problem with running the midlet class(BluetoothChatMIDlet.java)
    it keep showing me the same kind of error in the output pane of netbeans...
    which is:
    Installing suite from: http://127.0.0.1:49296/Chat.jad
    [WARN] [rms     ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
    i also did some research on this but due to lack of forum that discussing about this,im end up no where..
    from my research i also find out that some of the developer make a changes in class properties..
    where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
    i did that but also didnt work out..
    could any1 teach me how to fix it...
    thanx in advance... :)

    actually, i do my FYP on bluetooth chatting...
    and there will be more than two emulators running at the same time..
    one of my frens said that if u want to run more than one emulator u just simply click on run button..
    and it will appear on the screen..

  • Fatal error with installation of je22 con. arch. beta impl.

              In step 6 it says that classpath must start with connector.jar and
              welogic60J2eeConnector.jar. But if I do that then the following
              fatal error occurs. But if the jar files are after weblogic_sp.jar
              and weblogic.jar then there is no problem with starting the server.
              How can I avoid the error? Thanks.
              <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server> <Unable to
              initialize the server: 'Fatal initialization exception
              Throwable: java.lang.VerifyError: Cannot inherit from final class
              java.lang.VerifyError: Cannot inherit from final class
              at java.lang.ClassLoader.defineClass0(Native Method)
              at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
              at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
              at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
              at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
              at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
              at java.security.AccessController.doPrivileged(Native Method)
              at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
              at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
              at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
              at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
              at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
              5)
              at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
              5)
              at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
              e_WLStub.java:248)
              at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
              at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
              at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
              java:38)
              at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
              at weblogic.Server.main(Server.java:35)
              '>
              

              Sorry for the confusion. As you have already installed wls6.0SP1, you
              can download our JCA beta for wls6.0SP1 from:
              http://developer.bea.com/code/wls.jsp Or directly from:
              http://developer.bea.com/ftp_bin/weblogic60SP1J2eeConnector.zip
              prasen
              Murali wrote:
              >
              > Hi
              >
              > Thanks for the prompt reply.
              > I have once again installed the weblogic600sp1_win.exe (that's
              > the only one available for NT) and the weblogic_sp.jar was not
              > installed (shouldn't it also be with the package). I don't know
              > whether there are any other files which conflict with connector
              > but the problem still exist. I have also wl5.1.0 installed on
              > the same machine. Can both versions be on the same machine?
              >
              > With best regards,
              > murali
              >
              > prasen <[email protected]> wrote:
              > >Looks to me that you are using JCA with weblogicServicePack.
              > >Our JCA for
              > >WeblogicServicePack will be coming out soon. Till then
              > >you should use
              > >our JCA beta with Weblogic6.0(and not with SP).
              > >
              > >prasen
              > >
              > >"N.S. Murali" wrote:
              > >>
              > >> In step 6 it says that classpath must start with connector.jar
              > >and
              > >> welogic60J2eeConnector.jar. But if I do that then the
              > >following
              > >> fatal error occurs. But if the jar files are after weblogic_sp.jar
              > >> and weblogic.jar then there is no problem with starting
              > >the server.
              > >> How can I avoid the error? Thanks.
              > >>
              > >> <20-03-2001 13:47:50 GMT+01:00> <Emergency> <Server>
              > ><Unable to
              > >> initialize the server: 'Fatal initialization exception
              > >> Throwable: java.lang.VerifyError: Cannot inherit from
              > >final class
              > >> java.lang.VerifyError: Cannot inherit from final class
              > >> at java.lang.ClassLoader.defineClass0(Native
              > >Method)
              > >> at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
              > >> at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
              > >> at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
              > >> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
              > >> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
              > >> at java.security.AccessController.doPrivileged(Native
              > >Method)
              > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
              > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
              > >> at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
              > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
              > >> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
              > >> at weblogic.rmi.internal.ServerRequest.makeCBVOutputStream(ServerRequest.java:50)
              > >> at weblogic.rmi.internal.ServerRequest.getMsgOutput(ServerRequest.java:95)
              > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:24
              > >> 5)
              > >> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:22
              > >> 5)
              > >> at weblogic.jndi.internal.ServerNamingNode_WLStub.createSubcontext(ServerNamingNod
              > >> e_WLStub.java:248)
              > >> at weblogic.jndi.internal.WLContextImpl.createSubcontext(WLContextImpl.java:81)
              > >> at weblogic.transaction.internal.JNDIAdvertiser.initialize(JNDIAdvertiser.java:76)
              > >>
              > >> at weblogic.transaction.internal.TransactionService.initialize(TransactionService.
              > >> java:38)
              > >> at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:46)
              > >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:405)
              > >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
              > >> at weblogic.Server.main(Server.java:35)
              > >> '>
              

  • Error With Installation CD (Zen Mic

    Hello,
    I have recently received a Zen Micro. I attempted to load the software on my computer from the Installation CD provided. When my computer reads the CD the Creative logo comes up and then a screen comes up that says to click the arrow button to begin installation. When I click the arrow button after a few seconds a error message comes up saying the following:
    "DemoShield Player has encountered a problem and needs to close. We are sorry for the inconvenience"
    It then goes on to say that they have created a error report, I have chosen not to send the report.
    No matter what I try the error still appears. Any advice?

    I think this is a common problem.
    http://forums.creative.com/creativel...essage.id=2475
    Click. Then press ctrl+F. Type in "DemoShield" and hit enter.

  • IPhoto Error with OsX

    I tried to sync my iCloud with another computer but it never worked, just gave me pop-ups. After updating my OsX, my iPhoto is blocked as seen on the photo below. I can't open it, because it says the version is old. I checked for new updates for the iPhoto but there were none. iCloud still not synced with the other computer. Anyone know what to do? Thanks!

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

  • Error with installation of elements 11

    I had the trail version of 10 installed, decided to wait and get 11, and it errors every time I try to install.   Any ideas? 10 installed no problem.

    Hi,
    PSE 10 trial should not affect the installation of PSE 11 .
    I am assuming you are getting the error related to Shared technology installtion problem .
    Please restart your system and then install .
    Even it does not solve your problem please try solution under this page.
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
    thanks,
    earth-star

  • Error with installation of EX Edition

    hi
    I am trying to install expresses edition and was successful also. I am able to run sql+ and isql but when i run enterprise database managment tool on the browser it says server not found. i ran emca also and started the service but still i am getting the error. If anyone else has face the problem and know the solution kindly let me know
    regards
    dev

    the java version yes, not the dbconsole that the OP
    was talking aboutGood to know. I only remembered an Oracle session, where they mentioned that XE doesn't come with an "agent" to be addressed by remote OEM ... or was it OMS?
    C.
    Message was edited by:
    cd

  • Error with installation

    When I download any of the updates 11.0-2 to 11.0.0-3, I get an error message saying I can't ope nthe patcher app because it was not downloaded from the Apple App Store.
    Mavricks, AE CS6 version 11 (which won't open ).
    Any clever soul know a workaround for this nonsense?

    Hi,
    I've been trying to patch my CS6 to work with Mavericks for weeks now.
    Spent four hours on the phone and Adobe Connect with Tech support yesterday, I got the impression the guy gave up (told me to reinstall Mavericks and try a clean reinstall, which i did, no go)
    Very annoyed because it seems I've wasted £165 on the upgrade to CS6, nearly a week of labour trying to patch the ^&$*&^ thing, and the result seems to be I have to continue asking my clients to down-save any AE docs to CS5.5 before I can work on them.
    Very disappointed.
    thanks for all the tips anyway!

  • Errors with installation Disc 2

    i tried to reinstall Tiger since it appeared that the OS needed to be reloaded to resolve another problem, which is that the apple bar disappeared. Now when i get to disc 2, it tells me there are errors and I have to try again. I've followed all of the useful advice on this thread, reset the PRAM, etc but still have the same problem after innumerable attempts to reinstall. Yes, I did clean the disc, and before today it was used exactly once.
    http://discussions.apple.com/thread.jspa?messageID=7739310
    Anyone have some suggestions? Plan B is to bring it to the apple store and let them figure it out
    cheers

    Hi pj3,
    Did you not try this one from that link?
    Use the Customize Install option to reduce the Fonts, Printer Drivers, Languages, and Applications to a minimum, so disk 2 never gets asked for.
    Second install disk won't work...
    There've been many reports of this, some had the disks replaced by Apple and it worked, some didn't.
    A workaround is to reduce the number of Languages, Printer, Drivers, Fonts, and APPs until it no longer needs Disk 2 for the install.

  • Critical Error with installation

    "Critical errors were found in setup
    - You cannot install this product because a conflicting
    compoent is already installed.
    Please see the Setup log file for details."
    I guess I have to wipe something from my hard drive but I'm
    not sure what. I don't know what they mean by Setup log file so I
    don't know how to check that. This error message has been keeping
    me from installing Dreamweaver CS3.

    I too hit this error.  I have  a customer that has a current 8.6(2) install, and wants to upgrade to 10.5.  We are doing this on a UCS C260 server.
    We were attempting to load this on the 10.5 OVA.  After looking over the thread above, I noted the adapter type change made by manuelmtzdominguez.  I started looking at this, and sure enough, the adapter type is seems to be the root cause. 
    The OVA for an 8.6 machine uses an adapter type "flexible", but the adapter type on the 10.5 OVA is using VMXNET3.  On the 10.5 OVA, the only available options are VMXNET3 and E1000.  Flexible isn't an option.
    In my case, I'm simply going to install it on the 8.6 OVA, and then use Prime Deployment to run the upgrade to 10.5 (to get everything just right). 
    Moral of the story is, I guess, check the adapter types since apparently some options are not supported on older versions. 

  • I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos.  It wont tell me which picture is the issue.

    I took a lot of pictures and video on my recent trip to Ireland.  Now I am trying to download the photos and videos from my iphone to my mac - iphoto.  I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures.  Help!!

    Try using Image Capture to download to a folder on the Desktop.  If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

  • SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

    SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
    after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
    Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • Profit center at GR IR Clearing Account - MIGO (Account Assignment Q)

    Dear all, We are implementing SAP into a Real estate business client and based on requirements from the Finance we have agreed to have profit centre level balance sheet for each of tower Hence lets take an example There is a project with PC1 (Common

  • Can Oracle materialized view be used as crystal report datasource

    Hi, Can we use materialized view created in Orace 10g database as the data source of crystal reports. I'm using Crystal reports Server 2008 V1 version. I'm unable to find the materialized view under my data connection. I can see only tables, static v

  • Archive Data on XI ...how it helps

    Hi All, I have read that xi message are saved in certain cluster tables. So if we archive data on xi server, some file willbe created on XI server machine.. does on arvching XI messages are deleted from cluster tables. how does arching help in reduci

  • Upgrade to adobe pro DC, Adobe ID used, gets responce that its been used before

    we are upgrading to adobe pro DC, from version 9 pro, and when trying to use the same adobe ID it says the ID was used to activate two other, and is blocking me from using it. is there a limit to how many and ID can be used on. I'm trying to avoid ev

  • Project-network- subactivities

    Hi Guru's In my business scanerio, i have an project in which there is sub- activity( eg planing, designing, testing etc. all are service activity) my resouces ( employee in service project) will be allocated in subactivity level & their invoice shou