IPhoto file too small for publication
I am writing a series of gardening articles for a national publication and was told the size of the photo (from my iPhoto library) I e-mailed is too small. Will changing the size from "large" to "actual" do the trick? Or do I need to send it through Dropbox or another application? Many thanks, Lynn
Hi Larry,
Thank you for your reply. I apologize for not adding more details. The photo I originally sent as a "large" file was 414 KB. When I switch to "actual" it is 2.3MB which I am assuming will work for the publication. I am only sending one photo at a time – one for each article. Thank you again. I expect the photo editor will let me know tomorrow if they have what they need. Fingers crossed.
By the way, in addition to iPhoto I also have Lightroom but have not had a chance to learn the basics of using it. As of now my entire library is in iPhoto and Picasa.
Thank you again for your time,
Lynn
Similar Messages
-
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more. -
Paging file is too small for this operation to complete.
iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)
Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)
-
How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.
This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts -
Host Agent Service critical - Paging file is too small for this operation to complete
Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
PatrickThe hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it. -
IPhoto library too small?
Trying to transfer iPhoto library 09. To external harddrive. The file transfer goes fast and the size is 237mb. That seems MUCH too small for the amount of photos that I have. How do I make sure everything is ok?
2 years ago I got a MacBook Air with newer iPhoto which took a copy of iPhoto library converted it to lion and that file is 65 gb. Since then there has been more added to the old iPhoto 09 library so I don't understand how it can be less than 1gb even with compression.
Please helpWhat size is the iPhoto library on your main disk before transfering it? Yes 237 MB is very small - but with nno actually information about what you are doing (lots of information about things that have no bering on the question) it is impossibel to tell
the correct way to transfer an iPhoto library is
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN -
TFTP file too large for upload
I'm trying to upgrade my router via TFTP. I keep getting this File too large for TFTP error. I'm using the recommended TFTP server from Solarwinds.
There does not seem to be any setting in the server to let large file pass, It's the first time I see that, but this is the biggest IOS I had to upload. I had no problem sending the last IOS witch is only about 3MB smaller.correct. copy ftp://userid:password@servername/directory/filename flash:
For more information, refer to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tcf_r/cf_02ht.htm#wp1032450
Hope this helps, -
ORA-22835: Buffer too small for CLOB to CHAR on Solaris but not Windows
Hi,
I get the following error on Solaris but not Windows equivalent 10.2 installations
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4575, maximum: 4000)
ORA-06512: at line 65
the code causing the problem is:
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
the entire code being executed is:
DECLARE
EX BOOLEAN;
CNT NUMBER;
SQL1 VARCHAR2(4000);
FLEN NUMBER;
BSIZE NUMBER;
TABNAME VARCHAR2(4000);
DEFDIR VARCHAR2(4000);
RSZ VARCHAR2(4000);
ECODE NUMBER(38);
ERRMSG VARCHAR2(4000);
CURSOR C1 IS
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
TYPE C1_TYPE IS TABLE OF C1%ROWTYPE;
REC1 C1_TYPE;
BEGIN
OPEN C1;
FETCH C1 BULK COLLECT INTO REC1;
FOR I IN REC1.FIRST .. REC1.LAST
LOOP
UTL_FILE.FGETATTR(NVL(REC1(I).DEFAULT_DIRECTORY_NAME,'CARDSLOAD'),
REC1(I).LOCATION, EX, FLEN, BSIZE);
IF EX THEN
IF INSTR(TO_CHAR(REC1(I).RSZ),'\.')<>0 THEN
DBMS_OUTPUT.PUT_LINE('INVALID RECORDSIZE OR CORRUPTED FILE');
END IF;
DBMS_OUTPUT.PUT_LINE('Table Name: ' || TO_CHAR(REC1(I).TABLE_NAME));
DBMS_OUTPUT.PUT_LINE('File Exists '||REC1(I).LOCATION);
DBMS_OUTPUT.PUT_LINE('File Length: ' || TO_CHAR(FLEN));
DBMS_OUTPUT.PUT_LINE('Record Size: ' || TO_CHAR(REC1(I).RSZ));
DBMS_OUTPUT.PUT_LINE('Block Size: ' || TO_CHAR(BSIZE));
DBMS_OUTPUT.PUT_LINE('# RECORDS: ' || FLEN/TO_NUMBER(REC1(I).RSZ));
BEGIN
CNT:='';
SQL1:='SELECT COUNT(*) FROM '|| REC1(I).TABLE_NAME;
EXECUTE IMMEDIATE SQL1 INTO CNT;
DBMS_OUTPUT.PUT_LINE('SELECT COUNT FOR: ' || REC1(I).TABLE_NAME||' = '||CNT);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('SELECT COUNT FAILED FOR: ' || REC1(I).TABLE_NAME);
ECODE := SQLCODE;
ERRMSG := SQLERRM;
DBMS_OUTPUT.PUT_LINE(ECODE||' '||ERRMSG);
END;
ELSE
DBMS_OUTPUT.PUT_LINE(REC1(I).TABLE_NAME||' '||REC1(I).LOCATION||' File Does Not Exist');
END IF;
DBMS_OUTPUT.PUT_LINE('-----------------------------------------------------');
END LOOP;
CLOSE C1;
EXCEPTION
WHEN OTHERS THEN RAISE;
END;
Any ideas why Solaris but not Windows would have this problem?
Thanks,
VictorCheck out Bug 4715104 - ORA-22835 / truncated data from USER/ALL/DBA_EXTERNAL_TABLES
-
All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.
"I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
Well, did you checked GB after you changed your resolution?
Which setting did you change to?
You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
In the Finder window you can enlarge the icons & fonts also.
Finder>View>Show View Options. -
All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred -
"buffer too small for string or missing null byte" inserting CR in excel
I have created a Crystal Report based on below stored procedure.
DELIMITER $$
DROP PROCEDURE IF EXISTS `ww_test`.`PRD_Data_sp` $$
CREATE PROCEDURE `ww_test`.`PRD_Data_sp` (in cyear int, in cmonth int, in groupby varchar(20), in Inv_type varchar(4))
BEGIN
select
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END ,
sum(p.QTYSAM),
sum(p.CASESSOLD),
sum(p.SOLDDOL)
from ww_test.prd_data p
where (month(p.FKDAT)=cmonth and year(p.FKDAT)=cyear) and
((p.FKART) is null or not(p.FKART in ("FAZ","ZMBB","FAS",Inv_Type))) and
((p.AUART) is null or not(p.AUART in ("ZMBB")))
Group by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END
Order by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END;
END $$
DELIMITER ;
I have used Add Command to create report based on this.
call ww_test.prd_data_sp({?Year},{?Month},{?GroupBy},{?InvType});
I am able to refresh the report in crystal and as well in Infoview without any problem.
But when i try to insert this report in Excel using Live Office it gives me error. I able to insert other crystal reports without any problem.
An error occurred while opening the report. The report does not exist; you have insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)
Failed to open report (LO 26619)
Cannot open report document
Buffer too small for string or missing null byte.
can anyone suggest where i am going wrong? Any input is appreciated.
Crystal Reports 2008
Live Office XI 3.1
BOEdge XI 3.1
Xcelsius 2008
Thanks ,
MadhaviWith the CurrentValue method
Crpt.ParamFields[3].CurrentValue := memo1.Text;
Is there another solution ? -
I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
I went into the PC settings and tried to change the display resolution. This changes the size of all the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
Mylenium -
Buffer too small for string - Crystal Report for Vs2010
Hello,
I have recently upgrade my VS2010 project to Crystal Report for Visual Studion 2010.
I have some reports that contains more than 512 characters in the Report Comments section.
When I try to do a RptDoc.SaveAs(vPath, false) the following error is raised:
Buffer too small for string or missing null byte.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.SaveAs in :line 0
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.SaveAs in :line 0
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SaveAs in :line 0
This line SaveAs was working has expected with Crystal Report 2008. Any idea on why it is not working anymore.
Thank you.
CharlesHello Don,
I have start a little project to retest the behavior.
I have create a new report in Crystal Report 2008 just by clicking New, Finish and Save.
In a new Windows Application in Vs2010 ,I have added the following Crystal Report Reference.
CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0
CrystalDecisions.Shared, Version=13.0.2000.0
I have then try the following code and found out the limit of ReportComment is 511 but in the Crystal Report 2008 designer and runtime the limit did not apply.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
Dim i As Integer = 0
Try
objRpt.Load("c:\temp\empty.rpt", CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy)
Do
i += 1
objRpt.SummaryInfo.ReportComments = New String("X", i)
Loop
objRpt.SaveAs("c:\temp\dfh_save.rpt", False)
Catch ex As Exception
MsgBox("i: " & i)
MsgBox(ex.Message)
End Try
End Sub
I am able to put has many characters if I insert the report in the Vs2010 Solution.
If you prefer I can send you my little project.
Thank you.
Charles
<code> should be
Edited by: Don Williams on Feb 4, 2011 12:47 PM -
Default text size in Compressor is too small for normal human eye
Is there any way to change the text size in Compressor 4 in the windows? I can't find any.
The normal default text size is way too small for any normal human being eye to read clearly.
Please, have mercy on us, whoever designed the tiny fonts! Not fair to the rest of us . . .Well, guess we folk with not-too-good vision will simply have to keep on trucking the best we can, eh? We can't enlarge text, so as a result we can't use software like Compressor like the rest of the population. Sad to say, especially with a company like Apple . . .
Yeah, well I gave the Apple Compressor Team my feedback, just like I've done the last 3 months with other things, then of course the feedback from us all melts into the either, and we never really know if anyone reads it, like they say. Me thinks not. This is the only feedback I'll ever get, I'm afraid:
QUOTE:
Thank you for your feedback on Compressor.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the Compressor Team. If we need to follow up with you on your ideas for improving Compressor, we will contact you directly.
We appreciate your assistance in making Compressor better.
Compressor Team
Apple -
Yosemite fonts too small for middle aged eyes
I just updated my desktop to Yosemite and am wishing I hadn't - the designers clearly don't have a clue what happens to normal eyesight in middle age. I am NOT vision impaired - just a little bit short-sighted (-1.5) and a little bit long-sighted (+1) and a little bit astigmatic, with up-to-date glasses that correct my sight properly. I am nonetheless finding using this new OS on my new 1920x1080 (non-Apple) monitor, which worked perfectly with Mavericks, absolute torture - all the text in menus, settings screens etc is just much too small for comfort, at least in the chosen font. In some apps I can use Cmd-+ to increase the font size, but there seems to be nothing I can do about the font sizes in Finder, Preferences etc
I have read the threads about the reasons and ways to mitigate the problem, and have increased contrast and reduced transparency in the Accessibility settings, and am considering running the script to change the default font back to Lucida Grande. But my point is that I have perfectly normal eyesight (for someone of 53) and have never had any screen problems before, so I shouldn't need to be using the Accessibility settings. I know it is fashionable among designers to create lots of blank white space, but white space doesn't compensate for illegibility!
I can see from all the threads on this topic that I am not alone. So please Apple, sort this out - usability must come first - and not just for the under 30s!Even iBooks on MBP Retina !?
I love the iBooks app and use it specifically because of the "Night" appearance option, which turns the page background all black and the font white (similar to inverting the display). Fortunately books' font sizes remain adjustable as big as I want, but - I can no longer see page information (current page number and number of pages left to read) at the bottom of each page. The page information is barely visible (appears like small dark grey foggy font on a black background). This is very likely also the result of the Yosemite font fiasco. Not an issue when reading books in "Night" appearance on the iPad, (they didn't break it yet yet in iOS).
"Digital Books without page numbering information"!
A Huge design fiasco.
Maybe you are looking for
-
How to Approach for full implementation
We have a situation here that we r planning to implement SAP BW. But here R/3 is not fully implemented. In this situation how to approach to prepare a Blueprint. We are planning to implement SD,MM,PP,QM and FICO modules. We dont have any functional
-
I've only had it for 4 months maybe 5 and it stoped working 3 months after I got it. I've tryed everything and nothing works:(
-
How can I stop my phone from muting in the middle of calls?
When pressing "send" and making a call, Six boxes pop up on the screen, one of them being the muting option. My problem is that face or ear touch this button while I'm in the middle of a call. I need to be able to manipulate the options that come
-
Why won't iCloud message go away?
My ipad has a message on the main screen that says: This ipad has not been backed up in 4 weeks. The message will not go away when I push OK & it will not let me shut the ipad down. It is esentially frozen. I have gone in to manage my icloud to a
-
64 bit xp and/or 64 bit windows 7
Currently i have a (June) Mac Pro, Radeon 4870, 8gb Ram, and a 640GB HDD, with Snow Leopard. Well right when I got it I added a second 500GB HDD dedicated for windows XP, well at the time, x64 wasnt supported, so in windows mode, which i mostly use,