IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT
Similar Messages
-
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
Just to add that everything worked just find before i updated the app,after the update i wasnt able to locate my device
Try force closing the Find My iPhone app by double tapping the home button, locating Find My iPhone in the list at the bottom, tapping and holding it until it wiggles, tap to close it, then tap the home button again.
-
hi there, I am trying to upload my photos from my Iphone 5s to my Iphoto on my macbook air, but they wont load. \
It says "loading" but it's not.... does anyone have a solution? Thanks in advance.There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?
It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room. -
My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.I am deperate to restore my phone...Please help!!!!
Most likely a hardware failure, & if so, you won't be able to restore/activte your phone. If you've tried at least two times, & are still getting this error, make an appointment at any Apple store, or call AppleCare.
-
Error message "The Volume for "IMG_5727.JPG Cannot be found.
Help!
I have been recieving the error:
"The Volume for "IMG_5727.JPG Cannot be found.
Insert the disk or connect to the server volume and
wait for it to appear on the desktop, then try again."
It has been happening for months but I am editing/moving
wedding pictures(900 plus) right now and it is impossible to work around this. They are new images that were just down loaded from the card reader.
I can see the pictures right in the library
Help!
KathyYou say you are "editing/moving" pictures from a wedding.
Depending on what you mean by that, it could be creating the problem you're having.
Are you physically "moving" your pictures within the finder, or do you just mean dragging and dropping within iPhoto?
Usually, the way iPhoto works is you upload them into iPhoto from a card or some sort of volume.
A new file is created in the iPhoto library.
That file never leaves the library as it is now the actual link to iPhoto.
However, if you physically move that file from the library, you will break the link and have lots of problems.
You can't move files from the iPhoto library.
However, if you're not physically moving photos from the library (manually, via the finder), and if you are uploading into iPhoto, and iPhoto shows you a thumbnail and when you click on it, it gives you that message, then there might be something wrong with the volume iPhoto thinks it's uploading pictures to from your card/source volume.
I would reestablish a new volume to save to and see if it's still having the same problems. Make sure you backup the original library though. -
Error Message::: The volume for "CIMG0010.JPG" cannot be found.
When I import to iphoto, I get this message:
The volume for “CIMG0010.JPG” cannot be found.
Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
I have to press Cancel each time to resume importing.
Anyone have same problem?
Thx for your help.
Happy Holidays!
Ms. MiniMacI too had this problem but found a very simple solution*. No rebuild needed.
For anyone else who runs into this problem here is what happened to me, and what I did about it (for reference):
I checked to make sure all software was updated, I tried different memory cards, I tried reformatting cards and used a card reader and tried straight from my camera (Canon 40D). I was downloading over 250 photos and after sitting there hitting 'Cancel' on each photo TWICE my photos finally loaded... or so I thought. When I went to open them, only the thumbnails were there! Argh!
Thankfully I didn't delete the memory card, and this time I tried downloading to a new folder on the Desktop and then importing to iPhoto. I got the same error. I tried locating each photo with the 'Find Photo' button and this opened the correct folder and after I scrolled down it had even highlighted the correct file. Unfortunately this did not work.
I tried a photo at the beginning, middle and end of the shoot to see if the memory card was somehow corrupt. Same problem with each. Eventually I did load my photos but again, only after I hit cancel for each one of the 250 photos. Interesting that after I hit 'cancel' it would download the photo.
The 'duplicate image' window came up for the 3 images I had randomly selected earlier, so I didn't think it could have been a naming problem. After all, I have been using the same camera for a while with sequential numbering enabled.
After reading Terence's reply (thank you) I was even more flustered that I would have to rebuild a database that I thought I was careful creating and backing up. Backing up... That was it!
I have over 40 gigs of photos on a USB drive from before I owned my Mac. I choose to use iPhoto to catalog the files but did not want to load them all on to my laptop and clog up useful memory.
It occurred to me that as Terence had suggested iPhoto may be trying to double check the new images against old ones, but the old ones can't be found. Even though the files were on completely different drives.
After simply plugging in my USB drive the photos downloaded to my MacBook immediately. Just to be clear, the photos were not using the same names as old ones nor were they being written to the USB drive; but iPhoto needed to have that USB drive plugged in to download photos to the laptop hard drive.
This is an easy fix, and avoids database rebuilding, but I am worried about when I go traveling etc. and need to download photos without my USB drive handy... -
I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks
Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have. -
Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?
I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router. -
"The volume for DSC_0001.jpg cannot be found"?
I'm a bit of a novice with macs but a new problem has occurred while importing photos from my Nikon D70s to iphoto. With the majority of images, it comes up with the caution "The volume for DSC_0001.jpg cannot be found" or whichever DSC image. If I press 'cancel' it imports the photo and I can view and edit it. If I press 'OK' or 'find photo' nothing useful seems to happen.
I have tried updating iphoto but I again get an alert saying "An eligible iPhoto application was not found in the location /Applications."
Any help with both these problems would be greatly appreciated.
Cheers.This sometimes occurs if you’re importing a file into iPhoto and there’s already a file there with the same name. Digital cameras can produce many, many files with the same name over their lifetime, so it’s not uncommon to have several files called IMG_00543.JPG, for instance. Now you want to import one also called this.
What happens is that iPhoto compares the two files to check for duplicates. However, if iPhoto cannot find the file already in the database for comparison, then you get this message. It suggests that your database is damaged because iPhoto has lost track of this (or these) similarly named files.
A simple test is to rename the file you are importing - just add a character - IMG_00543a.JPG for instance. If this then imports with no issue then you might consider rebuilding your library:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
This is the error I get. I did not find this on the itunes webpage...
"itunes cannot connect to this iphone. An unknown error occured 0XE80000065." Does anyone have a solution. I am not connecting an iPhone, but an iPod. I cannot therefore sync my iPod to my iTunes.Hi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT
Maybe you are looking for
-
Z5A German Foreign Trade Report and company currency not Euro
We recently create a German company with USD as local currency and group currency, Euro being only the third currency. There is an issue with the German foreign trade regulation reports (Z5E - RFAWVZ5A) that is a legal report for the authorities and
-
Where is the "Facing Pages" Option in Pages?
Where (oh where) is the "facing pages" button in the new iCloud Pages?? It used to be in the document pallet, but now seems to have gone missing. Thanks! Bryce
-
We have 4 Bluecoats with ACE 4710 to load balance. The ACE is used in Bridge mode.We are using URL hashing. We were facing internet slowness , we were waiting about 15 secs to get responds on the internet browsers when opening any url ,even the reque
-
Hello SDN, I have a functional Module in which we already added the extra field once. Now, I want to add some more fields But they are from other extractions. The field I want to add are PLNBEZ, GLTRI and PRUEFLOS all are from the tables AFKO via AUF
-
Error running web services examples
Hi Guys, After spending the whole day finally i get the soap server working. I have to manually deploy soap.ear into OC4j instance. But again i am trying to run web services stateless java say hello class example... but no luck. I am getting connecti