IPhoto & iCloud has been removed when I reinstall?

I have a problem, my applications iPhoto & iCloud has been removed when I reinstall it to Mac OS X Lion. I need to purchase to App Store?

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

Similar Messages

  • Why would my phone say that my sd card has been removed when it hasn't?

    Why would my phone say that my sd card has been removed when it hasn't?

    Try to remove it and plug it back in.  SD cards are not the most robust things.  I have had several die on me.  You can try to plug it into another device and see if it's readable.  If it's not, it has likely died.

  • How can I get back my internet explorer which has been removed when I have downloaded Mozilla Firefox?

    I want to download Mozilla Firefox as an optional browser as I can only access a website for work through this browser. However, when I downloaded MF, even though I tick that I do not want it as my default browser or homepage, it downloads, but has removed my Internet Explorer connection. This has happened a couple of times now and is very frustrating. I don't know how to get my IE back and keep the option of MF available. MF seems to automatically delete/remove IE when it is downloaded. I am using Windows 8. I would appreciate help and advice to correct this situation. Many thanks.

    Hi, Philipp,
    Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
    Kind regards, K.

  • How to show a row has been "removed" from a table

    We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED and NO_CHANGE without any problem, but I'm not sure how I can determine that a row has been REMOVED when it no longer exists in the next version.
    I have provided an example piece of SQL below:
    with w_acct1 as
    (select 'A1' acct, 0 vers from dual
    union all
    select 'A2' acct, 0 vers from dual
    union all
    select 'A3' acct, 0 vers from dual
    union all
    select 'A1' acct, 1 vers from dual
    union all
    select 'A2' acct, 1 vers from dual
    union all
    select 'A1' acct, 2 vers from dual
    union all
    select 'A4' acct, 2 vers from dual)
    select a.*,
           nvl(lead(acct) over (partition by acct order by vers desc),'NULL') ld,
           case when lead(acct) over (partition by acct order by vers desc) is null then
                   'ADDED'
               when lead(acct) over (partition by acct order by vers desc) = acct then
                   'NO_CHANGE'
               else
                   'REMOVED'
               end add_remove
    from w_acct1 a
    order by vers,acctWhich gives me the following result:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A1     2     A1     NO_CHANGE
    A4     2     NULL     NEW
    The result I want is:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A3     1     NULL     REMOVED
    A1     2     A1     NO_CHANGE
    A2     2     NULL     REMOVED
    A4     2     NULL     NEW
    Note the REMOVED rows associated with the version even though they don't exist in the dataset for that version number.
    Can this be done with analytic functions or some other cool Oracle feature I'm missing?
    Regards
    Richard

    You can't know about a row being removed unless you have a record of that row somewhere, either as a copy of your old data (see example below) or you've recorded the information using delete triggers etc.
    SQL> ed
    Wrote file afiedt.buf
      1  with old_data as (select 1 as id, 'A' as dta from dual union all
      2                     select 2, 'B' from dual union all
      3                     select 3, 'C' from dual)
      4      ,new_data as (select 1 as id, 'A' as dta from dual union all
      5                    select 3, 'X' from dual union all
      6                    select 4, 'Y' from dual)
      7  --
      8      ,ins_upd as (select * from new_data minus select * from old_data)
      9      ,del_upd as (select * from old_data minus select * from new_data)
    10      ,upd as (select id from ins_upd intersect select id from del_upd)
    11      ,ins as (select id from ins_upd minus select id from upd)
    12      ,del as (select id from del_upd minus select id from upd)
    13  --
    14  select 'Inserted' as action, null as old_id, null as old_dta, new_data.id as new_id, new_data.dta as new_dta
    15  from new_data join ins on (ins.id = new_data.id)
    16  union all
    17  select 'Updated', old_data.id, old_data.dta, new_data.id, new_data.dta
    18  from old_data join new_data on (old_data.id = new_data.id)
    19                join upd on (upd.id = new_data.id)
    20  union all
    21  select 'Deleted', old_data.id as old_id, old_data.dta as old_dta, null as new_id, null as new_dta
    22  from old_data join del on (del.id = old_data.id)
    23  union all
    24  select 'No Change' as action, new_data.id as old_id, new_data.dta as old_dta, new_data.id as new_id, new_data.dta as new_dta
    25  from new_data where id not in (select id from ins_upd union all
    26*                                select id from del_upd)
    SQL> /
    ACTION        OLD_ID O     NEW_ID N
    Inserted                        4 Y
    Updated            3 C          3 X
    Deleted            2 B
    No Change          1 A          1 A
    SQL>

  • I am using the iPad 3 64 and am an avid photographer . I have been using iPhoto as my editor when I download my pic to my iPad . I have upgraded to IOS 6.  Please tell me why has the delete option has been removed iPhoto?

    I am using the iPad 3 64 and am an avid photographer . I have been using iPhoto as my editor when I download my pic to my iPad . I have upgraded to IOS 6.  Please tell me why has the delete option has been removed iPhoto?

    That was the first thing I check, my X no longer exist, the app still works fine and does everything it did in the past, the the x (delete) option is no longer there.  I have deleted and redownloaded the app and did a complete reset, X still not there as an option.  Is anyone else experiencing this problem? 

  • When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    When I back up my  I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

    iCloud- Photo Stream FAQ
    iCloud- Photo Stream limits
    iCloud- How to delete photos from Photo Stream
    iCloud- Photo Stream troubleshooting
    iCloud- Using and troubleshooting Shared Photo Streams
    iPhoto '11- Add, remove, and edit photos in a shared photo stream
    iPhoto '11- Create a shared photo stream
    There are obviously limits to what can be stored in Photo Stream and for how long.
    If she wants backups then she will need something like this: Seagate Wireless Plus.

  • Goods receipt when PO creator has been removed from org structure ?

    Hello in my organisational structure PPOMA_BBP, i have 2 users, X and Y.
    X has created a PO in the SRM portal.However , X has been removed from the org. structure.
    Is it possible for Y to make the goods recept( that is , Y logs in the portal and makes the goods receipt) ?

    Hi
    Did you try to delete the user ? Did you get any error message?
    Note 1148837 - SRM user cannot be deleted
    When trying to delete an SRM user the system will check if there are still
    related SRM documents in the system. If there are active documents in the
    system the deletion is not possible. This is the correct system behaviour.
    But even if all related SRM documents are archived the deletion is
    sometimes not possible, because there are residual entries in table
    CRMD_PARTNER linked to this user.
    More Terms
    User crmd_partner residual entries deletion active document
    Cause and Prerequisites
    Solution
    The attached report PARTNER_SET_DELETE will display in simulation mode all
    residual entries in table crmd_partner with invalid item or header links
    and in non simulation mode it will delete the corresponding crmd_partner
    entries.
    Header Data
    Release Status: Released for Customer
    Released on: 10.03.2008 11:54:37
    Priority: Correction with low priority
    Category: Help for error analysis
    Main Component SRM-EBP-PD Procurement Document Methods
    Additional Components:
    SRM-EBP-ADM-USR SRM User Administration
    Valid Releases
    Software Component Release From
    Release
    To Release and Following
    SRM_SERVER 500 500 500
    SRM_SERVER 550 550 550
    Support Packages
    Support Packages Release Package Name
    SRM_SERVER 500 SAPKIBKS14
    SRM_SERVER 550 SAPKIBKT12
    Correction Instructions
    Ref note 550071 too..
    regards
    Muthu

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

    When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • When I try to download and install the latest software version of iTunes, this message occurs:  "iTunes has an invalid signature.  The download has been removed."  Any suggestions?

    When I try to download and install the latest software version of iTunes, this message occurs:  "iTunes has an invalid signature.  The download has been removed."  Any suggestions?

    You seem to have an iTunes problem and not an iPod problem.  I suggest posting in the iTunes forum.
    How areyou doing the download?
    From Apple's site?
    Via the Apple downloader
    PC or Mac?

  • When I update to 11.01 i get the following "i Tunes" has an invalid signature. The download has been removed.

    When I try to update to 11.01.1 i get the following “i Tunes” has an invalid signature. The download has been removed.

    Go directly to Apple link to download
    http://support.apple.com/kb/DL1426
    Select "Save" instead of "Run".  Once downloaded, double click the iTunesetup.exe to install.

  • Not receiving icloud verification email, have checked spam etc..phone is just saying account not verified, the address was linked to my husbands account but has been removed.

    Not receiving icloud verification email, have checked spam etc..phone is just saying account not verified, the address was linked to my husbands account but has been removed, prior to this it was saying it was already in use.
    If i change to an old address it works fine but all my apple equipment uses a current googlemail address and dont want numerous ids
    My itunes account/icloud account only shows this address, albeit on icloud its not verified
    My husbands accounts dont have this address anywhere
    Where is the verification mail going????

    All...sorted so thought i owed it to you all to update...
    As suggested on numerous sites it was in my spam folder....but because i am using googlemail it was in the Googlemail Spam on my phone and online google account, the spam wasnt getting to my outlook account (where i was looking for it!!!)
    As soon as i opened it there they were all 38 verification emails !!!!!
    Hope this helps

  • Updated to 7.0.2 and now some of my music has been removed and I can't find it, and music I deleted years ago has reappeared, and I can't delete it from icloud. My phone will also no longer sync with my computer.

    I updated to 7.0.2 and now some of my music has been removed and I can't find it, and music I deleted years ago has reappeared, and I can't delete it from icloud. My phone will also no longer sync with my computer. My phone has also been freezing regularly since I updated.

    The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
    Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
    Message was edited by: Apple I0S Help Team

  • When attempting iTunes update I get "iTunes has an invalid signature. The download has been removed"

    When attempting iTunes update I get "iTunes has an invalid signature. The download has been removed"

    Any luck

  • What to do when local file with serial number has been removed?

    what to do when local file with serial number has been removed?

    Please describe your problems and symptoms in more detail. Please include system (eg Windows 7) and name + version of Adobe software.

Maybe you are looking for

  • Insert extra field in ALV report

    Hi All, I’ve requirement like … need to add Vendor’s ‘Country Code’ very next to ‘Tax code’ field in standard SAP standard ALV report S_ALR_87012357 . I’ve copied program (RFUMSV00) into z-program. But I’m not getting any idea how can I add extra fie

  • ATG 9.4 installation problem with weblogic 10.0.2 MP2

    Hi, I am new in ATG platform and framework. I am trying to install ATG 9.4 on BEA Weblogic 10.0.2 on Windows desktop with the help of Installation guide for ATG. I have completed installation of BEA Weblogic 10.0.2 and then ATG 9.4, giving the correc

  • Problem in Calling a report from form 6i using parameters

    Hello Oracle experts, I am facing a problem while calling a report using form 6i and passing parameters, Actually the problem is I want to use the parameters passed to reports in a query group in my report. I am not able to use the parameters passed

  • Protective strip in MacBook Pro disc drive?

    While installing some software on my MacBook Pro, I noticed that a thin strip made of some type of plastic or protective coating came loose when my DVD drive kicked out the disc. The gray strand is about as long as the disc drive opening. Is this som

  • ITunes won't run even in the safe mode

    Installed the latest iTunes. It freezes all the time and when closed won't start up again even though it eats up the memory. Itried running it in safe mode and other tips but nothing is working. It now stopped working even in the safe mode. Any kind