Iphoto & Image Capture doesn't see Iphone, Itunes Does?

Iphoto & Image Capture doesn't see Iphone, Itunes Does.
I am able to do everything as normal in itunes but cannot import photos using Image Capture(my prefered way to get my images) as it does not see my devise. Same for iphoto it doesn't see my iphone, please help.
Thank you

paulcb wrote:
It's generally recommended not to use a USB hub with the iPhone. I've used one with no problems but many have reported solving sync problems just by eliminating the hub and plugging directly into a USB2.0 port.
I'm sure.
The trouble is that there are too many bits of hardware that are recommended not to use a hub with. I have a PhoneValet (which won't work at all with a hub) and a set of first generation Harman-Kardon speakers (ditto). Then I need a USB port to plug the hub itself into, and that's my three USB ports used up.
Martin

Similar Messages

  • TS3195 My mac mini (Snow Leopard, v10.6.8) does not acknowledge my iphone 4, iphone 4s or ipad2 in iPhoto, Image Capture, iSync or Preview but it does in iTunes.  I am at a loss for importing photos, short of emailing them.  Glitch with OS X 10.6.8 ?

    My Mac Mini (v10.6.8) does not acknowledge my iphone as a device in iPhoto, Image Capture, iSync or Preview although, iTunes does.  I am at a loss for importing photos other than emailing them to myself. Same problem with my iphone 4, iphone 4s, ipad2 and New iPad. Is this a problem with OS X 10.6.8 as I read some posts claim? Please help.

    I was able to import photos in iPhoto and Image capture when I was running SL 10.6.8 on my older MacBook.
    Did you try quitting everything, restart the Mac and then try again?
    Are there any updates at all for the Mac? I was helping one user not all that long ago and there were updates for her Mac software that had nothing to do with the OS and when she downloaded the updates - the iPad was then recognized in iTunes.

  • Image Capture doesn't recognize iPhone and Camera anymore

    Image Capture doesn't recognize my iPhone or my Fujifilm camera. I am pretty sure this happened after updating to Safari 4.0.2 and having to restart which I did today. Yesterday I was able to to browse through my devices.

    I'm adding that iTunes has no problem reading the iPhone.

  • Image capture doesn't recognize iphone

    OS X 10.7.4, iphoto 11, iphone 4, ios 5.xx
    -I have photos on iphone that are not in photo stream, and videos as well, that I want to download
    -image capture does not recognize the iphone as a device when I launch it. It does not autostart even though I set the IMAGECAPTURE option in iPhoto preferences
    -itunes does see the phone
    -iphoto does not see the phone and does not have the missing images - I cannot manually import anything from any device
    -Activity monitor shows a new copy of ptpcamera each time I plug in the iPhone to the USB cable
    -restarting iPhone/iTUnes/iPhoto/Mac have no effect
    Something changed with the latest iPhoto/iTunes combination

    Found the resolution in another thread. Have to go to iPhoto preferences and set Image Capture to open when a camera is plugged in. Then it should auto start.

  • After 3.1.3 iphoto & image capture don't detect iphone as camera device.

    I have installed the recent update 3.1.3 on my iphone 3GS.
    My iphoto (or image capture) no longer detects the iphone as a camera...
    and will not automatically bring up the import option.
    I can't get photos and video from the iphone to the computer...
    The iphone seems to sync with itunes without any problem... it's just the image capture.
    I have a laptop (running OS X 10.5.8) and a imac desktop... neither of them detact the iphone when it is connected for image capture... iphoto is set to open automatically when a camera is detected (i tried my other dedicated digital camera and it works fine)... even if I manually open iphoto - it simply won't import... I have restarted everything... I have swapped the connection cords...
    it has to be a bug in the update... everything was working fine before the update.
    please help...

    I found another thread which solved the problem for me...
    should have looked harder before posting:
    if you are having the same problem try this thread:
    http://discussions.apple.com/thread.jspa?messageID=11056088#11056088

  • Image Capture doesn't see or download my photos taken since update to iOS4

    Hi!
    I updated my iPhone 3GS to iOS4 a couple of days ago. Since then, Image Capture stopped seeing (and therefore can't download either!) the photos I've been taking, which are stored in my camera roll. It can still see those taken before the update.
    Any idea...?
    Help would be much appreciated!

    @august1851 -- I had the same issue: took 84 photos on the iPod Touch but couldn't get ImageCapture.app or iPhoto.app to recognize that there were images on the device.
    My solution was to (a) install Dropbox on the iPod, (b) log in to Dropbox using my existing account, and (c) telling Dropbox to sync photos from my iPod to my Dropbox account.
    The entire upload process took about an hour, but now I have access to my photos!

  • Image capture doesn't see the photos on my iTouch

    I've got a 4th gneration iTouch with 6.0.1 and an iMac. The applications suggested by Apple for importing iTouch photos don't seem to see the photos (iPhoto and Image Capture). Any thoughts? Thanks!

    @august1851 -- I had the same issue: took 84 photos on the iPod Touch but couldn't get ImageCapture.app or iPhoto.app to recognize that there were images on the device.
    My solution was to (a) install Dropbox on the iPod, (b) log in to Dropbox using my existing account, and (c) telling Dropbox to sync photos from my iPod to my Dropbox account.
    The entire upload process took about an hour, but now I have access to my photos!

  • Image Capture doesn't see my printer/scanner

    iMac 27 / OSX 10.9 (Tried updating and there aren't any available) / HP 6500 e709a printer all-in-one 9USB connected)
    I went to scan something this evening, clicked Image Capture and it open but didn't show any devices or option to add one. System preferences sees the device pius an additional printer I have connected. They both print or at least did. It was suggested that I delete the 6500 and re-add it. When I do that it says there isn't any software available at this time. Ugh!
    Any thoughts? Thank you, CJOB

    Install drivers from this link:
    HP_Lion_Ink_SW_v12.13.2.dmg
    Then one labelled HP from Apple:
    HP
    If that doesn't work, look at Image Capture's preferences and enable TWAIN.
    If that doesn't work, try
    Vuescan
    Silverfast
    these scanners available to the Mac using SANE drivers from open source SANE developers

  • IPhoto / Image Capture doesn't find Canon Powershot Camera

    Since I upgraded to Lion, my Macbook no longer sees my Canon Powershot SD 1200IS camera. Tried using iPhoto and Image Capture (following someone else's suggestion). No SD slot on my Macbook. Is there another solution?

    Since I upgraded to Lion, my Macbook no longer sees my Canon Powershot SD 1200IS camera. Tried using iPhoto and Image Capture (following someone else's suggestion). No SD slot on my Macbook. Is there another solution?

  • Image Capture can't see scanner

    I upgraded to Mountain Lion and while the printer function of my Canon MP 180 is working, the scanner is not working now. Image Capture doesn't see the scanner. Following advice on this forum, I deleted the printer in system preferences > print&scan and the reinstalled it a few times. I also downloaded the 2 available (but old) drivers from Canon. Still nothing works. Can anyone help?

    Canon Australia is hosting a scanner driver for 10.8 and MP Navigator v3.0.5 for your MP180. Install the scanner driver first and then MP Navigator.
    Note that Canon is not hosting an ICA driver for this model, which is used by Image Capture and Preview. So this would explain the lack of the scanner entry in the KB article that Clinton has mentioned (the vendors make the drivers - Apple just hosts them).

  • Iphone/ipad video glitches after upload thru iphoto/image capture...suggestions??

    iphone/ipad video glitches after upload thru iphoto/image capture...suggestions??

    If the problem only appears with iPhoto then it may be due to a bad pref file for iPhoto. It could also be caused by a bad cache or log file.
    There are additional ImageCapture preference files located in the /Home/Library/Preferences/ByHost/ folder. Be sure to remove them also. Also remove the /Home/Library/Caches/com.apple.iPhoto/ folder.
    There are two ImageCapture cache files located in the /Library/Caches/ folder. Drag them to the Trash but do not delete them as yet.
    Now restart the computer and see what happens.

  • Iphoto/image capture problems

    I have a MacBook pro with lion (all updates installed) and an iPhone 4S with the latest OS (all updates installed)
    When I plug the phone into the macbook, I can see the phone in itunes (latest version) but I do not see the phone in iPhoto or Image Capture app - No camera or scanner connected.
    Please let, I want to import my photos!
    Thanks in advance
    iPhone 4S, iOS 5.1.1

    If iphoto is selected, the iphone does not show in iphone (or in image capture)
    if image capture is selected, the iphone does not show in image capture (or iphoto)
    The iphone does not appear in any application anytime no matter what the preferences are in iphoto
    (for that matter, the iphone does not show in picasa import either!!!!)

  • Image Capture App Not recognizing Iphone

    Using a MBP with 10.5 with most recent updates. Running iphone 1.14
    Iphoto does not import my pictures from my iphone. This is because image capture doesn't recognize it.
    I have read many posts about this and will let you know what I have tried so far.
    - Disabled auto syncing in itunes and image capture
    - deleted the plist for iphoto, image capture, and preview.
    - reinstalled image capture from original leopard cd using pacifist.
    - reset and rebooted both devices many times.
    I have an alternate install of OS X Leopard on an external USB drive which works well with my iphone and image capture, shows up right away.
    Anyone have any ideas what the problem could be. I have given up, tried everything I could think of, but I know the problem lies with image capture not recognizing the iphone.

    Already tried a connection without a hub, on both usb ports on the macbook.
    As for secondary software that might interfere, none installed to my knowledge.
    Well it looks like the mac quote of "it just works" doesnt work in my situation, I dont feel like booting to my second hard drive just to sync the photos. So I guess I will have to wait until my new macbook for a fresh install because I dont want to erase everything currently on my book.
    might try and install and archive next time I have some serious software issues and hopefully that will solve my problems.

  • HT201302 I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in e

    I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in either.

    If you manually open iPhoto do you not see the photos?
    Maybe here:
    iOS: Unable to import photos or device not recognized as a camera
    Yu are trying to impoort photos taken by or saved to the iPod, right? If the photos were synced to the iPod then iPhot does not work.

  • Image Capture doesn't recognize my Built-in iSight Camera

    I'm trying to use Image Capture but when I open the application is shows the following message:
    "No scanner or camera connected".
    It's supposed the camera is connected because I'm also using Skype video call (not at the same time I'm trying to use Image Capture) and there's no problem with it.
    Image Capture was working perfectly couple months ago, now it isn't.
    Does somebody know what the problem might be?
    Thanks for your comments and opinions.
    Sebastian.

    image capture doesn't use the isight, it's for other digital cameras & scanners. use the screen capture ability. hold, command shift, press 4 & tap spacebar to see a camera icon. click on an open / active window when it's lighted in blue, click the mouse. saves the pic as a png on your desktop.

Maybe you are looking for

  • Difference in mb51 & mb5b reports

    dear all,   please when  i run mb51 & mb5b reports up to the current date, i get differences in stocks, mb51 value is higher than mb5b . what are the possible reasons for this? is there a way of configuring mb5b to pick all movement types for all bat

  • ** How to simulate the conditional statements in web analysis

    i have an "average" member in the Measures dimension on ASO application. i wrote a MDX formulae to it as IIF(A=0 OR A=MISSING), B/12, A/12 In the web analysis when i view the data at level-0 it will display correct value but when i apply filters on o

  • ***TDS on Advance**

    Hi, Iam testing TDS on advance. its working fine at DP entry (f-48)( W/TAX ALSO GOT CREDITED HERE) but while at clearing the DP (f-54) its not debiting witholding tax. ( there is no line item created for this. How can get the W/tax line item here in

  • Inserting a single cell

    Okay, I can insert a whole row or column, but how do I insert a single cell? Say I need to add a cell at G8, moving the data down one cell. Rather than trying to select 325 cells and move them down. Simple in Excel, but I'm giving Numbers a reason to

  • Creating a sales order with reference/BAPI_SALESDOCUMENT_COPY

    Hi, I have to create a sales order with a reference to another order and have to change some fields in the new document. According to SAP note 370988 the function BAPI_SALESDOCUMENT_COPY should allow to create a sales order with reference to another