IPhoto incredibly slow now

Ever since installing Mavericks and the new iPhoto, iPhoto has become amazingly slow. It takes much longer to load photos. I keep the trash emptied before quiting each time. And, why is it slower? Is there anything else I can do to speed it back up?

Danesmoor wrote:
I've recently installed Snow Leopard & have yet to see any great differences or benefits.
The big problem I am having is that iPhoto is incredibly slow now in panning zoomed images.
e.g. I open an image in full screen and zoom in (which is slower than previously) and then use the multitouch function on the touchpad to pan... And I am presented with lag which appears to be buffered - i.e. I move my fingers in a certain pattern and then remove them & the software gradually follows this path with a lengthy delay.
Any ideas or help?
I know what you mean. Ever since I purchased Snow Leopard, my Mac has been acting un-Mac like. iPhoto hangs during simple operations. I've had to do a forced shut down. This is getting a little irritating, I hope they resolve these issues soon.

Similar Messages

  • IPhoto incredibly slow, stalls whole computer

    I am having major problems with iPhoto. I am trying to organize and clean up my library, but I spend hours waiting for iPhoto to open, photos to load or delete, and for iPhoto to shut down. Every process is incredibly slow and I basically can't work with the program at all, as the computer stalls for up to an hour.
    I have 15,000 photos in my library, but still sufficient space on my hard drive. According to iPhoto help, the program should be able to handle about 25,000 photos. My computer (Mac OSX Powerbook G4 with Tiger) is about 3 years old now and I don't know if it's a computer issue or an iPhoto issue. Does anyone have any suggestions?
    I am slowly deleting some photos from the library but in the coming years I expect to build my photo colloection. Is it a quantity issue? Do the latest versions of iPhoto address this? I have read of other people having slow iPhotos even with far fewer photos.

    Michael
    This might have something to do with MobileMe trying to connect when iPhoto starts. If so it would be useful to be able to disable this "feature"!
    Yes, turn it off. It’s in the Preferences - MobileMe -> Check for new Photos: set it to Manually.
    While you’re at it, make sure that ‘Search for Shared Libraries’ is disabled in Sharing too.
    Regards
    TD

  • IPhoto incredibly slow. . . more ram will help?

    I have over 4k photos and iphoto is a pain to use now. Will adding another 512 do the trick. Anyone know of any good deals? thanks

    Hi, Dave
    a) it seems that you have only 512 Mb Ram. probably, another 512 or 1024 MB would help for everything what you do.
    but
    b) you say : " over 4k photos ": If each photo is 2.5 MB, you deal with a total of 10 GB. (I suppose for lack of otehr info a 5 Mpxl camera, which gives about that size photos.) Well, I know that the data storage is organized such that not all the file has to be read in order to get one specific part read into memory. I would safe the photos on a cd or dvd (i do that anyhow), then "clean up" (i mean: eliminate that what i don't want to use right now). I have a little less than 2 k photos, and iphoto works just fine and fast for me.
    Hope this helps,
    Thomas

  • IPhoto is incredibly slow

    iPhoto 11 (upgrade) is incredibly slow. Any ideas why?

    It took me from Friday afternoon until Monday morning to narrow this down, but here's what it was on my system, which has 6,300+ photos and a library size of 17+ GB:
    It wasn't the number of photos, or the size of the library, or Faces, or Spotlight, or anything "normal" that was causing my machine to virtually lock up about a minute after launching iPhoto '11 (9.1.3). Activity Monitor showed almost no CPU activity, and little to no disk or network activity.
    What was causing the slow-down was something in the Accounts preference within iPhoto. I had about half a dozen e-mail accounts, Facebook, Flickr, and MobileMe listed as accounts. Once I deleted them, iPhoto sprang back to life.
    I have since discovered that iPhoto will continue to wait for services in your Accounts preferences to come on-line indefinitely ... with no warning or notice that it is doing so. While it is waiting, it for some reason kills the performance of your entire system, so whatever other applications you have running (including Finder and Dock) will be extremely unresponsive.

  • Early 2011 MacBook Pro incredibly slow after installing Mavericks

    I'm really hoping someone can help me out. As per the subject line, I installed Mavericks on day one (and learned my lesson!).
    Since installing Mavericks my MacBook Pro runs incredibly slow. If I open the Mail App and Safari - it almost grinds to a halt. I have the "Memory Clean" App which I now have to run constantly (it appears to help a little) and I try to only launch one app at a time where possible, but it's not really pratical.
    As an aside, my MacBook ran really well with Mountain Lion, so there's little doubt to my mind that Mavericks is the culprit.
    I'd be eternally grateful for any help & advice :-)
    I spotted other people advise running EtreCheck, here are my results:
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:54
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 319.21 GB (33.32 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.globaldelight.driver.BoomDevice          (1.1 - SDK 10.9)
              net.telestream.driver.TelestreamAudio          (1.1.0 - SDK 10.8)
    Startup Items:
              Jaksta: Path: /Library/StartupItems/Jaksta
    Problem System Launch Daemons:
              [failed] com.apple.wdhelper.plist 3rd-Party support link
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist 3rd-Party support link
              [loaded] com.bourgeoisbits.cloak.cloakd.plist 3rd-Party support link
              [loaded] com.bourgeoisbits.cloak.cloakproxyd.plist 3rd-Party support link
              [loaded] com.google.keystone.daemon.plist 3rd-Party support link
              [loaded] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
    Launch Agents:
              [loaded] com.amazon.sendtokindle.launcher.plist 3rd-Party support link
              [loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Launch Agents:
              [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
              [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
              [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    User Login Items:
              Boom
              PopClip
              Caffeine
              Fantastical
              AppTrap
              Dropbox
              Alfred 2
              Cloak
              ScreenFlowHelper
              Google Chrome
    Internet Plug-ins:
              o1dbrowserplugin: Version: 3.18.3.12840 3rd-Party support link
              SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.4.1.4 3rd-Party support link
              AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 3.18.3.12840 3rd-Party support link
              npgtpo3dautoplugin: Version: 0.1.44.28 - SDK 10.5 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
              EMusic: Version: EMusic 1.0.0 3rd-Party support link
    3rd Party Preference Panes:
              AppTrap  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Hazel  3rd-Party support link
              Perian  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Applications/iWork '09
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              Attachment Tamer Helper:          Version: 3.1.2 - SDK 10.5 3rd-Party support link
                        /Users/derricksutton/Library/Mail/Bundles (Disabled)/Attachment Tamer.mailbundle/Contents/Resources/Attachment Tamer Helper.app
              Nisus Thesaurus:          Version: 1.1 - SDK 10.4 3rd-Party support link
              Amazon MP3 Downloader:          Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 297.29 GB Disk used: 266.26 GB
              Destinations:
                        Seagate Expansion Drive [Local] (Last used)
                        Total size: 465.44 GB
                        Total number of backups: 10
                        Oldest backup: 2013-09-21 16:05:10 +0000
                        Last backup: 2013-12-31 20:05:10 +0000
                        Size of backup disk: Too small
                                  Backup size 465.44 GB < (Disk used 266.26 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  28%          WindowServer
                   5%          Google Chrome
                   2%          Dock
                   1%          Fantastical
                   1%          hidd
    Top Processes by Memory:
              135 MB          Google Chrome Helper
              98 MB          mds_stores
              90 MB          Finder
              86 MB          Google Chrome
              61 MB          EtreCheck
    Virtual Memory Information:
              612 MB          Free RAM
              1.47 GB          Active RAM
              601 MB          Inactive RAM
              1.04 GB          Wired RAM
              523 MB          Page-ins
              2 MB          Page-outs

    CleanMyMac is probably your problem.
    CleanMyMac is crapware.
    Crapware is anything that purports to "optimize",  "clean", "accelerate", "monitor", or "protect" your Mac. These apps are unnecessary, poorly written, overpriced (if they were free, they'd still be overpriced), and harmful. The people who sell this stuff know this, but they keep selling it because people keep buying it. They can damage your OS and be difficult to uninstall.
    I would try to uninstall it, but if that fails, you may have to erase your HD and do a clean install.

  • 17" i7 MacBook Pro incredibly slow

    My i7 macbook Pro has become incredibly slow. Boot time is well over 3 minutes, bringing up a program (such as Microsoft Word or Pages) takes upto 2 additional minutes. When I look at the activity monitor, it does not appear that the machine is CPU bound--- CPU sits there at about 10-20% utilization at the most. I have a 7200 RPM drive, but it almost looks like it takes a long time to load. I have tried many programs: Disk optimization, DIsk Warrior, Clean my Mac, Mac Keeper.... so I have dedragmented my disk, cleaned all the caches, got rid of temp files, and done basically everything I can do.  Does anyone have any ideas as to what could be wrong? I do not have many programs that I run regularly;; Mainly Safair, Chrome, Microsoft Office, iWork, and Mail.   The vintage of the machine is June 2010.   MacKeeper is saying my machine is at optimized. I have also removed virtualy all the programs that I had at startup including Growl, Flip4Mac.  I have also cleaned my desktop.
    Ideas will be appreciated. I am now spending more time on my MacBook Air which is blazingly fast, but I am constrained by the small hard drive and the small screen.
    Thanks,
    Paul
    Paul Immanuel
    <Edited by Host>

    CPI1943 wrote:
    My i7 macbook Pro has become incredibly slow.....Mac Keeper....
    Says it all right there. Uninstall this P.O.S. software if you can, they don't provide a method neither.
    The Mac based Internet wants to crucify these jerks. It's as bad as MacDefender.
    Download the free Easy Find here, it allows more deeper of a search than Spotlight, even invisible files. Seek and destroy MacKeeper.
    http://www.devon-technologies.com/download/index.html
    When you first boot your machine and you have no programs open, look for a process that consuming a lot of CPU, it's likely your culprit, you can force quit it.
    Look at your System Preferences > Accounts > log-in items for anything your not using and click the "-" to stop it being a log in item.
    OnyX will deep system clean a Mac, do ALL the cleaning and maintenance tasks and reboot, it will do it without installing or running anything afterwards, unlike those other programs.
    http://www.titanium.free.fr/
    What I suspect is your caches are thrown off by the defrag. Do the OnyX and remove MacKeeper, I think you'll be a happy camper after that.
    When you reboot, there should be hardly anything running, your CPU usage should nearly zero.
    If all this fails, your looking at backing up your data. Hold c and booting off the installer disk that comes with your computer and using Disk Utility to Erase, format HFS+ Journaled and reinstalling OS X.  Programs from fresh sources and files from backup.
    Next time Carbon Copy Cloner your boot drive to a external drive, it's hold option bootable and you can recover/repair, run the computer off the clone or reverse clone if need be.

  • Incoming email to my Mac is incredibly slow - yet I receive it quickly on my iPhone - any suggestions?

    Incoming email to my iMac is incredibly slow - yet the emails download quickly to my iPhone - any suggestions?  Thanks

    This is an update from mariefromarnold:
    I am now unable to download email to both my iMac and my MacBook Pro.  I have accessed my verizon.net account directly and all of the emails are there.  The issue appears to be that the messages will not download to either of these machines - they do download directly to both iPhones.  Any suggestions?  Thanks

  • Installed update Iphoto 08.01, Now can't open iphoto

    When I installed iPhoto 08 on my iMac G4 with 15 GB free RAM, iPhoto became extremely slow, almost unusable. I rebuilt the library, but that was no help. Now that I've installed the update 08.01, I can't even open iPhoto. Anyone else having this problem? Any ideas?

    First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if that helps. If you can open you library but it's still slow try the tip in this thread: iPhoto 09 Slow? - Speed up iPhoto '09 by vacuuming its databases,

  • Importing photos from my iPhone is incredibly slow or not working anymore

    After upgrading from iPhoto to Photos, I can't import photos from my iPhone anymore after connecting it to my 5K iMac.
    When I do connect my iPhone to my iMac, it takes over a minute or two for just the "Import" button to appear next to the global Photos/Shared/Albums/Projects navigation.
    The next problem is that my thumbnails are loading incredibly slow, with just the thumbnail placeholder graphics appearing at a glacial pace without the actual thumb of the photo in question.
    These issues are terribly annoying and killing the excitement of the long overdue and great upgrade.
    Many thanks in advance to whoever can help me resolve these issues.
    SavJag

    Ok, this is incredible, but within 5 minutes of posting this problem, and after 6 to 8 views (hopefully by Apple Tech Support), these issues seem to be fixed.
    I just tried Photos again (my iPhone was already connected to my iMac) and boom, the Import button was already there in the global nav.
    The thumbnail gallery of my already imported and new items showed up immediately.
    When I hit "Import", my new items started importing immediately and turning up under the Photos section.
    Apple Support Community / Tech Support, a big thank you to whoever fixed this. Hugely appreciated.

  • Time machine incredibly slow on brand new macbook pro

    Hello everyone,
    I bought a new Macbook pro 8Gb Ram dual core 2.8 GHz in late February of this year. Initially, the Time-machine back-ups worked very well and fast but on April 19 (shortly after my last back up), the hard drive of the computer died. I had it changed by Apple Care (for free given the warranty), but when the computer came back, it still could not boot, being always stuck on the welcome screen. The guys at the store made a complete reinstall of Mac OS 10.7 on the new hard drive and since then everything works fine... except that now (on Lion 10.7.4) whenever I try to do a back-up with the time machine, the progression is incredibly slow. It typically progresses Kb per Kb when I have about 86Gb to back-up....
    I have check with disk utility that my time-machine external hard drive is fine. Furthermore, this HD is also used as a time machine for other macs and works very well in these cases. Finally, it still has more than 500Gb available on it.
    I would like to know what's going on with my macbook pro ? Why is the time machine basically not working and what can I do to change that ? I am a little worried because, as you know, having back ups is essential and right now I simply cannot do a back up my brand new computer.

    Pierre G. wrote:
    Well I started this backup two hours ago and I indeed observe the backup to progress by jumps. But overall it is really slow, right now it backed up 2Gb out of 88Gb.
    Yes, after a failed backup, it may appear to be very slow.  Let it run.
    Also see #D2 in Time Machine - Troubleshooting, especially the green box.
    I just hope the total time will not just be proportional because I don't have 86h available to do the back up.
    You must (or it's already spent some time deleting old backlups).  Otherwise, it would have failed.  Besides, the message you posted earlier said there was 508 GB available.
    See what the messages say; all that will be documented.

  • 3GS incredibly slow after iOS 5 upgrade

    Hello Everyone
    I accidentaly upgraded my 3GS to iOS yesterday... (not really, I just REALLY wanted Notification Center and iMessage) And now its INCREDIBLY slow. Switiching between pages is terrible, and anywhere text input is needed the keyboard lags like crazy! I do reckon it's because of the slower processor (my wife's iP 4 is FLYING in iOS 5), but I'm tired of having to wait about 5 seconds after I tap a letter for it to appear on screen.
    Is there a way I can downgrade back to 4.3.5? My phone wasn't half as bad back then, and I really need the speed back (constantly emailing for work, etc..)
    So please help me out if you can:)
    Thank You
    Juan Bernal

    Try resetting it: hold the on/off and home buttons until you see the Apple logo (ignoring the off slider that appears first), and release.  If that doesn't work, connect to iTunes, go to the Summary tab and Restore.

  • Incredibly slow internet, Connection drops.

    Well.. Posting here is pretty much a last resort..
    Background on what has happened:
    What i class as "acceptable" connection speeds for my phone line 4 - 6 mb.. This is the speeds i would achieve before i ran into any problems. 4mb through the day.. Sometimes ( not very often) 6mb early hours in the morning.
    Mid January 2014 - Broadband starts going incredibly slow.
    I'm talking 0.1mb connection speeds.
    So, i contact BT over the phone... Do all the tests and checks they tell you to do, problem persists, so i get elevated to a level 2 adviser. I get a call back from adviser, he does some magic with the exchange and my broadband speeds up.
    Speed achieved 2.5mb
    not quite the speed i used to achieve but certainly bare-able...
    February / March
    Exactly same as above, Internet slows down to a crawl, i contact BT, get elevated and it gets "fixed"
    Speed still sitting at around 2.5mb.
    May
    Parents inform me that the Internet is slow again and constantly disconnecting
    (They aren't very tech savy hence why i have been dealing with the problems)
    I start monitoring the connection allot closer, and notice that the connection is dropping quite allot in the evening.. I work evenings hence why i have never noticed this fact.
    After doing some research and diagnostics i notice the phone line is "Noisy". So i start monitoring this too. I find that this isn't always the case.. Some times its quiet other times you can bairly hear people on the phone for the noise (imagine someone crunching up a bag of crisps next to your ear, that's what its like)
    I Contact BT, quite frustrated that iv had the same problem 3 times now.. Tell them about the noise on the line, and an engineer is sent out.
    Engineer does all his tests in the house, "No problems" (The line was conveniently quiet while he was doing tests).. Just before he leaves i do a line test, and it perks up with some static, i let him listen.. He does his tests all over again, "no faults on the line"
    The Engineer then informs me, that in mid January when some work on a sewage pipe was being done right next to my telephone exchange, a line was cut.. I somehow dint think, for one second this is a co-incidence. From all my own tests and diagnostics this was the only explanation i had for the problems.
    He leaves, i contact BT again.. Get elevated to a level 2 adviser AGAIN.. he "fixes" it..
    Speed goes back up to 2.5mb
    About a week later this Problem happens AGAIN.. So i contact BT - And while I'm on the phone, the line is incredibly noisy and i say to the person on the other end that it is, so i get thrown across to a different department, who insist on sending an engineer out.
    Engineer comes out, does all the same tests that the first engineer did, line is quiet while he is here, i explain EVERYTHING to him.. He doesn't really have much of an explanation, tells me that the damaged wire from the sewage work was "fixed" And that 2mb is a good speed for how far i am from my exchange (maybe so, its still not the 4 - 6 i used to get though)....He decides to shimmy up the telegraph pole outside my house fiddles around up there and a couple of other things...
    After calling BT again, and getting elevated to a level 2 adviser (again) my Internet is "fixed"
    Speed Fluctuating between 2.5 and 3mb now.
    And here we are now.......Guess what? Internet is slow again...
    Iv noticed someone with a similar problem in another post, so.. Before you ask:
    Yes iv done all the tests, taken all phones out, tried a different micro filter, disconnected all other devices.
    My main socket doesn't have a test socket in it, so don't ask me to plug into it.
    ADSL Line Status
    Connection information
    Line state: Connected
    Connection time: 0 day, 00:01:04
    Downstream: 3,584 Kbps
    Upstream: 448 Kbps
    ADSL settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.1 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 14.7 dB / 21.0 dB
    Line attenuation (Down/Up): 40.0 dB / 22.5 dB
    Output power (Down/Up): 19.4 dBm / 12.3 dBm
    FEC Events (Down/Up): 95 / 0
    CRC Events (Down/Up): 0 / 0
    Loss of Framing (Local/Remote): 0 / 0
    Loss of Signal (Local/Remote): 0 / 0
    Loss of Power (Local/Remote): 0 / 0
    Loss of Link (Remote): 0
    HEC Errors (Down/Up): 0 / 0
    Error Seconds (Local/Remote):
    0 / 0
    Event Log - (**Only showing wan don't think you need to see all the DCHP lease's etc**)
    This page summarises all the recent events that have been recorded on your BT Home Hub. You can filter the events to show items related to a specific category.
    Category
    WAN
    Recorded Events
    Time & Date Message
    00:03:55,10 Jun. WAN Auto-sensing detected port DSL
    00:03:55,10 Jun. WAN Auto-sensing last connection port: DSL
    00:03:53,10 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    00:03:53,10 Jun. PPP IPCP Receive Configuration ACK
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP IPCP Receive Configuration Reject
    00:03:53,10 Jun. PPP IPCP Receive Configuration NAK
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP IPCP Receive Configuration Reject
    00:03:53,10 Jun. PPP IPCP Send Configuration ACK
    00:03:53,10 Jun. PPP IPCP Receive Configuration Request
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP CHAP receive success: authentication ok
    00:03:53,10 Jun. PPP CHAP Receive Challenge
    00:03:53,10 Jun. PPP LCP Receive Configuration ACK
    00:03:53,10 Jun. PPP LCP Send Configuration Request
    00:03:53,10 Jun. PPP LCP Receive Configuration Reject
    00:03:53,10 Jun. PPP LCP Receive Configuration NAK
    00:03:53,10 Jun. PPP LCP Send Configuration Request
    00:03:52,10 Jun. PPP LCP Send Configuration ACK
    00:03:52,10 Jun. PPP LCP Receive Configuration Request
    00:03:50,10 Jun. PPP LCP Send Configuration ACK
    00:03:50,10 Jun. PPP LCP Receive Configuration Request
    00:03:50,10 Jun. PPP LCP Send Configuration Request
    00:03:47,10 Jun. PPP LCP Receive Termination ACK
    00:03:47,10 Jun. PPP LCP Send Configuration Request
    00:03:44,10 Jun. QoS Rate cap set to 0.4Mbs
    00:03:44,10 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    00:03:43,10 Jun. DSL Link Up: Down Rate=3584Kbps, Up Rate=448Kbps; SNR Margin Down=15.1dB, Up=21.0dB;
    00:03:34,10 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    00:03:32,10 Jun. PPP LCP Send Termination Request
    00:03:31,10 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    00:03:31,10 Jun. DSL Link Down:the duration is 38211 seconds [1 : LosDetector]
    13:27:14,09 Jun. WAN Auto-sensing detected port DSL
    13:27:14,09 Jun. WAN Auto-sensing last connection port: DSL
    13:27:12,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    13:27:12,09 Jun. PPP IPCP Receive Configuration ACK
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP IPCP Receive Configuration Reject
    13:27:12,09 Jun. PPP IPCP Receive Configuration NAK
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP IPCP Receive Configuration Reject
    13:27:12,09 Jun. PPP IPCP Send Configuration ACK
    13:27:12,09 Jun. PPP IPCP Receive Configuration Request
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP CHAP receive success: authentication ok
    13:27:12,09 Jun. PPP CHAP Receive Challenge
    13:27:12,09 Jun. PPP LCP Receive Configuration ACK
    13:27:12,09 Jun. PPP LCP Send Configuration Request
    13:27:12,09 Jun. PPP LCP Receive Configuration Reject
    13:27:12,09 Jun. PPP LCP Receive Configuration NAK
    13:27:12,09 Jun. PPP LCP Send Configuration Request
    13:27:11,09 Jun. PPP LCP Send Configuration ACK
    13:27:11,09 Jun. PPP LCP Receive Configuration Request
    13:27:09,09 Jun. PPP LCP Send Configuration ACK
    13:27:09,09 Jun. PPP LCP Receive Configuration Request
    13:27:09,09 Jun. PPP LCP Send Configuration Request
    13:27:06,09 Jun. PPP LCP Send Configuration Request
    13:27:03,09 Jun. PPP LCP Send Configuration Request
    13:27:00,09 Jun. PPP LCP Send Configuration Request
    13:26:57,09 Jun. PPP LCP Send Configuration Request
    13:26:54,09 Jun. PPP LCP Send Configuration Request
    13:26:51,09 Jun. PPP LCP Send Configuration Request
    13:26:48,09 Jun. PPP LCP Send Configuration Request
    13:26:45,09 Jun. PPP LCP Receive Termination ACK
    13:26:45,09 Jun. PPP LCP Send Configuration Request
    13:26:43,09 Jun. QoS Rate cap set to 0.3Mbs
    13:26:42,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    13:26:41,09 Jun. DSL Link Up: Down Rate=1536Kbps, Up Rate=288Kbps; SNR Margin Down=15.0dB, Up=6.0dB;
    13:26:32,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    13:26:31,09 Jun. PPP LCP Send Termination Request
    13:26:29,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    13:26:29,09 Jun. DSL Link Down:the duration is 830 seconds [1 : LosDetector]
    13:12:48,09 Jun. WAN Auto-sensing detected port DSL
    13:12:48,09 Jun. WAN Auto-sensing last connection port: DSL
    13:12:46,09 Jun. PPP IPCP Receive Configuration ACK
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP IPCP Receive Configuration Reject
    13:12:46,09 Jun. PPP IPCP Receive Configuration NAK
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP IPCP Receive Configuration Reject
    13:12:46,09 Jun. PPP IPCP Send Configuration ACK
    13:12:46,09 Jun. PPP IPCP Receive Configuration Request
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP CHAP receive success: authentication ok
    13:12:46,09 Jun. PPP CHAP Receive Challenge
    13:12:46,09 Jun. PPP LCP Receive Configuration ACK
    13:12:46,09 Jun. PPP LCP Send Configuration Request
    13:12:46,09 Jun. PPP LCP Receive Configuration Reject
    13:12:46,09 Jun. PPP LCP Receive Configuration NAK
    13:12:46,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    13:12:46,09 Jun. PPP LCP Send Configuration ACK
    13:12:45,09 Jun. PPP LCP Receive Configuration Request
    13:12:45,09 Jun. PPP LCP Send Configuration Request
    13:12:41,09 Jun. QoS Rate cap set to 0.3Mbs
    13:12:41,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    13:12:40,09 Jun. DSL Link Up: Down Rate=416Kbps, Up Rate=288Kbps; SNR Margin Down=17.3dB, Up=7.0dB;
    13:11:47,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    13:11:44,09 Jun. PPP LCP Send Termination Request
    13:11:43,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    Next
    Software version V100R001C01B036SP05_L_B | Time & date 00:06 10/06/2014
    Speed test from - http://speedtest.btwholesale.com/
    1. Best Effort Test:
    Download Speed : 0.34 Mbps
    Your speed test has completed and the results are shown above, however during the test an error occurred while trying to retrieve additional details regarding your service. As a result we are unable to determine if the speed you received during the test is acceptable for your service. Please re-run the test if you require this additional information.
    So to summarise:
    Slow Internet
    Dropping Connection
    Noisy line

    In reply to imjolly
    I would try this belwire fix, but i have had broadband through this socket for about 8 years now, with no problems what so ever..
    So im automaticaly rulling out any sources of internal interference, as this would of already been a factor, and i wouldn't notice a sudden drop in speed.. 
    update:
    Todays Speed:
    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 23:08:52
    Downstream:
    3,584 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    14.3 dB / 21.0 dB
    Line attenuation (Down/Up):
    40.0 dB / 22.5 dB
    Output power (Down/Up):
    19.4 dBm / 12.3 dBm
    FEC Events (Down/Up):
    197747 / 123
    CRC Events (Down/Up):
    3747 / 114
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    32212 / 84
    Error Seconds (Local/Remote):
    0 / 0
    Havn't noticed any Noise on the telephone, Proboly explains why my connection has stayed up for 23 hours now. 
    I will contact BT, have them send an engineer out, i might be lucky this time, and have a noisy line while he is here.. Seems to me thats what im going to have to keep doing

  • Incredibly slow firewire transfer rate

    Hi fellas
    my firewire drive (formatted ext3) has an incredibly slow 2MB/s transfer rate?
    Is this normal? Anything I can do about it?
    Cippa Lippa

    I have a FireWire 400 HD, it has a JMicron chipset (pretty generic but works great). I worked wonderfully on Leopard without a single glitch ever.
    Now, after upgrading to SL, I experience the same as you and the drive is not responding well, hanging constantly and experiencing really slow transfer rates, that make it unusable (all applications that try to open something from it eventually hang). It's not a temporary glitch, even after several reboots and connecting/disconnecting the drive. The same drive under USB2 (it also has USB2 interface) works perfect (but I really want my firewire back).
    I hope Apple fixes it! Definitely a bug.

  • Incredibly Slow broadband Speed

    Hi, I'm servering from a Incredibly Slow broadband Speed and can't nail the reason why.
    The broadband for my street was down for a whole weekend although box said connection was ok - helpline was no help - just said try again tomorrow. Now we have internet but the speed is very very slow - speed test results are :
    Download = 53 kps
    acceptable range = 100-250 kps
    DSL Connection Rate 486 Kps (Down-Stream), 712 kps(Up-Stream)
    IP Profile for line = 135 kps
    Upload = 541 Kps
    Addition Hub Info:
    Noise Margin (Down/Up) = 8.5 dB / 6.7 dB
    Line Attenuation (Down/Up) = 63.8 dB / 35.8 dB
    Output power (Down/Up) = 1.3 dBm / 1.1dBm
    Prior to loss of service, my speeds although weren't great were about 1.2 Mps
    I've tried all the suggestions like changing channels, filters etc and nothings change in my house since the degrading of service.
    Can someone please help !
    Best regards

    I don't know if this will help, but I do notice that your output power is only 1.3dBm / 1.1dBm.  can I ask you to look on the back of your home Hub and check to see if it is a Type A or Type B, this will be on the label in the bottom right corner.  If it is a type B Hub then ring and ask for a Type A Hub as I have found that I get a better output power reading of around 16.0dBm.  When I was sent out a relacement Hub when mine went wrong they sent out a Type B and my speed went very slow, so I put the original Type A  Hub back on to see if it made a differance and my speed increased and my IP Profile went up.  So if this is the case, ring up tech support and don't ask tell them that you wont a Type A replacement Hub.  All the best in your efforts and don't forget that the more you insist the more you can achieve.

  • Incredibly slow 9300, I've tried it all.

    Hey everyone!
    To start off:
    I'm on Koodo
    I have a 3g curve, 9300, and it's OS is 6.0 Bundle 2391  
    Application storage: 189.6MB used  66.4 Free
    Pre batter pull:
    Memory use: 178.7 used 77.1 free under applications,
    Device status says 69103008 bytes free.
    After a battery pull:
    Memory use: 161.4  used 94.5 free
    Device status: 695473936
    I have all the standard apps that come with the Blackberry, no extras. 
    I have a couple hundred MB of music on a 2gb card.
    Now for the problem.
    I've had my crackberry for about a month now, and I love it.  But in the past week it has become incredibly slow, sometimes sitting for 10 minutes at a time without me being able to do anything, and I've missed some phone calls too.  In fact, at my school's award ceremony, I had my friend store it in her purse, and when she brought it out, it was frozen with the clock displaying the time from when awards started. 
    I'm incredibly frustrated. Here's what I've tried:
    Battery Pull
    Clear the log
    Memory cleaner
    Closing all apps possible
    Pull the media card
    Remove languages I don't use.
    Does anyone have any ideas?
    Also: My battery life has taken a dive in light of this freezing situation.  It usually lasts me from about 7:00am to arouns 9 or 10 at night, so a good 14 or 15 hours.  But now, it's barely making 6 hours, and that's mostly idle and in my pocket.
    Any assistance would be greatly appreciated.
    Solved!
    Go to Solution.

    Ok, so now go back to your Security settings, and turn it off.
    There's really no need for Memory Cleaner use for most users, it does not increase any memory amount and routinely only uses process time and causes the blasted processor busy clock.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for