IPhoto library list not showing up in the iMovie window

Hi everyone,
I upgraded to iLife '08 and also to Leopard recently and am having trouble using iMovie with iPhoto. I've had no problems pulling in iPhoto pictures into the previous version of iMovie but now I do. My iPhoto library sits on an external hard drive which iPhoto can detect but I'm not sure if I need to tell iMovie to look for it on the external drive or if there is something else wrong with the program. My pictures from Photo booth is showing up but those sit on my internal hard drive. I also tried my iTunes and I can see the list from iMovie as well. My iTunes library also sits on my internal hard drive.
Can anyone help please?
Thanks.

Welcome to the  Discussion Forums.
I'd suspect either your disk permissions or your iphoto library. You might want to try rebuilding your photo library but before you do if you could create new photo libraries on both your external drive and in your home photos folder and add a few photos to them and see whether they show up in imovie or not, it may go someway to isolating your issue.

Similar Messages

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Changes made in iphoto library are not showing up in aperture

I currently have Aperture referencing my photos off of my iphoto library. I have made changes (consolidated a couple of events) and imported more photos from my camera and both are not showing up in Aperture.
The new photos I imported were placed into an existing event (in both iphoto and aperture).
How do I get aperture to recognize the changes I made in organizing my library?
Thanks
Michael

Aperture won't know that you've made changes to your iPhoto library, and therefore won't redraw the thumbnail or update the main image. The way iPhoto works that if you make a change, it'll create another JPG and store it within the iPhoto Library folder or package (depending on which version you're on). If Aperture is still referencing the original image (quite likely), its not going to know iPhoto has created another one, and even more so, where that file is. You can do it the other way around and up date the to, for example, have images in your Aperture library, referenced to your iPhoto library. If you change the image in Aperture, it will update in iPhoto using the JPEG previews. The only thing that might not change is the iPhoto thumbnail, but the image itself will bring through the changes from Aperture as technically, its the same file is looking at.

"shared" section does not show up in the itunes window

I'm trying to use Home Sharing on iTunes but the "shared" section does not show up on the left hand side of the screen where it should be, so now I cannot use home sharing. Help?

It doesn't show up until you go to the iTunes Advanced menu and select "Turn on Home Sharing".

The songs I upploaded to my iPhone from the library will not show up on the iPhone

Alright this whole support system has been a hassle so please help me. I have been adding songs, say for example, an entire album from my library to my iPhone manually. Now in itunes, I click on my iPhone device, and I can see that album is present and has been added. But when I look on my iPhone, the album doesn't show up in the artist tab. So I added the "Very Best of the Doors" to my iPhone; and those songs are present through the song tab or the album tab, but those songs and even "The Doors" are nowhere to be seen in the artist tab. What's going on? I have no clue, it's just a hassle. Please help! I have an iPhone 3g or 3gs (I don't know which one) and both have 5.0.1.

This can be caused by iPhone false detection it is docked due to short circuit of the charging port. Clean the iPhone charging port with clean dry toothbrush. See if fixed. If not fixed and there is Warranty or AppleCare, make Genius reservation and take to Apple for resolution. If no coverage, clean the iPhone charging port again with the toothbrush and a small amount of Isopropyll Alcohol.

My iphoto library is not showing in my media toolbar

Is there a reason why my photo library is not loading to the media toolbar? I recently purchased a new computer and loaded my old files and applications from Time Machine. Could this have something to do with it?
Is there a way to turn on my iphoto library?
Thanks

Hello rhys139,
It sounds like you are trying to transfer music from your iPod to your computer. I found an article with information on transferring media from your iPod to your computer:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Material list not showing after saving the sales document

Hi
any body can give the answer for this question : AFTER SAVING THE SALES ORDER MATERIAL LIST IS NOT SHOWING . Thanks in advance

Hi,
Go to Menu EDIT >> DISPLAY RANGE >> ALL ITEMS
Also set it on sales order document type in VOV8
Display Range - UALL
Kapil

Iphoto library does not show photo files or years

Since installing I photo 8 I can no longer see individual files (or photos)in the finder window - I see the Iphoto Library and its a huge size but when i click on the file I cannot see the photos, nothing happens.
I can see all the photos in the Iphoto window pane.
Previously I used to go to this file and take copies of the various years to place on DVD for backup.
Can you help
thanks

Super mac Mom,
What you were doing previously was dangerous - you were modifying the old iPhoto's library from outside the iPhoto application. The truth is that it isn't a good idea with iPhoto 08, and it wasn't a good idea then either.
To answer your question - all you have to do is delete them from within iPhoto and then empty iPhoto's trash. They will no longer be on your computer. (This is assuming you have the "Copy items to iPhoto library" option checked - which it is by default. Since you said you "go into the library", this implies that you do have that option checked.) iPhoto will delete the original, anything modified, and the thumbnails when you do that. Your photos are as temporary as you want them to be.
nathan

My posts are not showing up in the topics window

I'm having a bit of a strange problem. I posted a question this afternoon, but it is not showing up on either of my computers in the Topics List of the forum in which they are posted. I can only access it by going to the sidebar "My Questions". Obviously others can find my post, as I've had a reply. I've tried logging out, logging back in, and using two different computers. Just thought I'd let you know.
Thanks.

Hello,
The post in question can be found here. I was the poster helping Linda and I can see it in the topics list fine but Linda cannot for some reason.
Just thought I would post the link to it here to help find it easier for you.
littleshoulders [:-)

Trying to set up Express to extend network. Had problems and now it does not show up in the Utility window? How can I overcome this?

It just blinks Yellow but will not show up in list so I can work with it. What do I do? Is it now a brick?

On the AirPort Extreme setup.....I assume that you did enter a check mark in the box next to "Allow this network to be extended"
Otherwise, the following instructions will be of no value.
Temporarily, connect the Ethenret cable from your computer to the AirPort Express (AX) and power up the AX in the same room or close proximity to the AirPort Extreme.
Open AirPort Utility, select the AX, and click Manual Setup
Click the Base Station tab just below the row of icons to name the AX, assign a device password (write that down) and adjust Time Zone settings
Click the Wireless tab next to the Base Station tab. Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Check mark entered next to Allow Wireles Clients
Wireless Security = Same setting as the AirPort Exreme network
Wireless Password = Same password as the AirPort Extreme network
Confirm Password
Click Update
As soon as you see the message that the settings have been stored, close AirPort Utility and disconnect the Ethernet cable
Wait 40-45 seconds for the AX to restart and you should have a green light
Locate the AX approximately 1/2 the distance from the AirPort Extreme to the area that needs more wireless coverage and power it up
The AX should now be providing more wireless coverage

My guest account is enabled, but does not show up in the login window. I'd like it to, thanks!

I've tried disabling then enabling it, but it does not appear.

Have you tried a safeboot? It can fix allot of account issues. Like accounts vanishing from the login list.
if that doesn't work, You change the login window to Name & Password, then you can try logging in with the account name "guest". dos it let you login?
if that doesn't work, can you post the output of "dscl . read /users/Guest" ? (skip JPEGPhoto)

Contact choice list not showing up on dial screen

I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

Library shortcut not showing up after Connect to Office in SharePoint 2010

I clicked "Connect to Office" in the library ribbon. The shortcut to the site showed up under Favorites in window's explore. But the library is not showing up.
The browser is IE 9, 32 bit.
any idea why the library shortcut not showing?

Hi,
According to your description, after Connect to Office, The shortcut to library is not showing up under SharePoint Sites.
I have met the same issue with you, and I solved the issue by the following:
Delete SharePoint Sites under Favorites in window's explore and go to C:\Users\Your user account, delete the SharePoint Sites folder.
Go to Connect to Office-> Click Manage SharePoint sites-> Delete all the library links.
Go to Connect to Office-> Click add to SharePoint sites again and check the result.
If the shortcut to the site doesn’t show up under Favorites in Windows explore,
go to C:\Users\Your user account, copy the SharePoint Sites folder, paste it into Favorites in Windows explore.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

ITunes cannot sync photos to the iPhone because your iPhoto Library is not yet available.

I've turned my iPhone 4 into a iPod, meaning I only use it to hold music for my workouts. Ever since I've upgraded to Yosmite I can't sync my iPhone 4 to iTunes anymore. I can back it up, but I can't sync. Each time it tells me "iTunes cannot sync photos to the iPhone because your iPhoto Library is not yet available" I don't want to sync any photos, just music.
I've tried to repair my iPhoto Library, restarted my Mac, restarted my iPhone 4 but I still get his error message.
In iTunes when I select my iPhone 4 > Photos, I just get a spinning wheel.
Any thoughts??

I can't follow the first link since I just get a spinning wheel for photos.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

IPhoto library list not showing up in the iMovie window

Similar Messages

Maybe you are looking for