IPhoto library selection menu lists library twice

Hello,
I am running iPhoto '11 9.3.2 on a MacBook Pro running 10.7.4. I moved a few iPhoto library folders from another laptop to my MacBook Pro Pictures folder this afternoon. Now, when I hold down the Option key and start iPhoto, the library selection menu lists one of the libraries I moved twice. Filepath shown for each listing is the same, but oddly one of them is in all CAPS. Choosing either one seems to open up the correct library, but having it listed twice worries me. Why is this happeing and how can I correct this? Please see my 3 screenshots below for clarification.
This screenshot shows the libraries in my Pictures folder. iPhoto Library Olive is only in the Pictures folder once. The filepath can be seen at the bottom of the screenshot as /Users/erin/Pictures/iPhoto Library Olive.
When I hold down the Option key and start photoshop, the above library selection menu pops up. Here, iPhoto Library Olive is listed twice. Filepath for the 1st iPhoto Library Olive selection shows /Users/erin/Pictures/IPHOTO LIBRARY OLIVE. I am not sure why the library name is in all caps here.
Above, I have selected the 2nd iPhoto Library Olive (default). The filepath reads /Users/erin/Pictures/iPhoto Library Olive. No caps in this iteration of the filepath.
What is the problem?
Thanks for any assistance.
- erin

Try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
     User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
     User/Home()/Library/Caches/com.apple.iPhoto folder. 
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
OT

Similar Messages

  • IPhoto not properly sharing same library between different accounts

    I have my iPhoto library installed on a 4GB thunderbird external hard drive, brand LaCie in case that matters. I made sure to select the drive and adjust the permissions as recommended in the Apple tech support article - basically you have to select the option to "ignore ownership on this drive" which I did. I also made sure to indicate that both user accounts could read and write to this drive.
    Now, I'm trying to make it so that my wife and I, who each have our own accounts on the same iMac, can share the same iPhoto library and import to the same iPhoto library. The problems seem to be occurring mostly on my wife's side. These are as follows:
    1) Many times when she loads up iPhoto, it starts off with the default iPhoto library in her directory and we have to keep manually selecting the iPhoto library on the external hard drive.
    2) Some of the pictures in the library viewed through her account have wrong thumbnails - that is to say, pictures within a given event show one set of thumbnails but when clicking you get completely different pictures. The same problem is not seen with the same pictures viewed in my account.
    3) When syncing iOS devices through her account, iTunes sometimes fails to see the correct iPhoto library, requiring us to again go into iPhoto and select the correct library on the external hard drive.
    I would really appreciate some feedback as to how to fix these problems. I thought I did everything correctly but placing the library file on a shared external hard drive and fixing the permissions, but still this problem is ongoing. How can I get iPhoto to only use the library on the external HD as default in her account as well as mine? And how to fix the thumbnail problem?

    I would trash the cache and the plist files in the affected account.
    The cache file is here
    /Users/Your Name/Library/Containers/com.apple.iPhoto/Data/Library/Caches
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • Problem with Ribbon when multiple List / Library WebPart are added to the same page

    Hi,
    I'm working on a SharePoint 2013 custom branding (custom master page and layout).
    I added one page layout with several Web Part Zones,
    <div id="cBottomFirst" class="cThreeColumn cThreeColumndMargin" >
    <div data-name="WebPartZone">
    <!--CS: Start Web Part Zone Snippet-->
    <!--SPM:<%@Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
    <div xmlns:ie="ie">
    <!--MS:<WebPartPages:WebPartZone runat="server" Title="Bottom Left Area" ID="wpz_bottom_left" AllowCustomization="True" AllowPersonalization="False" FrameType="TitleBarOnly" Orientation="Vertical">-->
    <!--MS:<ZoneTemplate>-->
    <!--DC: Replace this comment with default web parts for new pages. -->
    <!--ME:</ZoneTemplate>-->
    <!--ME:</WebPartPages:WebPartZone>-->
    </div>
    <!--CE: End Web Part Zone Snippet-->
    </div>
    </div>
    I have a problem, when I add several List View Web Part to the same page, then when I select one list / library, the ribbon is shown, but it is shown with all option disabled.
    Any idea?
    José Quinto Zamora SharePoint and Search Specialist MCITP and MCPD in SharePoint 2010
    http://joSharePoint.com

    Hi,
    According to your description, I suggest you check as follows:
    1. Please check that whether the ribbon is OK when you use the OOTB feature to add the web part to a page;
    2. What if you do the test in IE, will the issue still occur?
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have t

    I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

    After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

  • HT4710 when i try to go into iphoto i get a message To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select "Examine and repair iPhoto Library file permissions."

    in iphoto i get the shreen with just thr download circle and nothing happens. i click on on edit and get "
    To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select “Examine and repair iPhoto Library file permissions.“
    it still does not work

    Have you tried doing what it says?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Linking a library to a list - filtering data per selected drop down / check box item

    Good day,
    I am rather new to SharePoint and have run into a dilemma. Is it possible to link a library to a list, then create a parent-child relationship between the the department (list) to document (library)? 
    Example - I have a library that contains 100+ documents, the library is filtered using groups/subgroups. 
    IT
     -> IT TX (30 docs)
     -> IT WI (10 docs)
    Biz Ops 
     -> Biz Ops WI (8 docs)
     -> Biz Ops CA (5 docs)
    In the list I created I have departments as a required field, and a dropdown tool that shows the 5 departments that contain items that need to be grouped together. (Biz Ops, IT, HR, Sales, and Compliance)
    I have linked the library of documents to the form (list), using "Lookup (information already on this site)". All the documents in the library appear in the selection box within the list. However is it possible to first select a department which
    then filters documents only tied to said department? So at the beginning of the list you choose the department you wish to browse the documents, then it filters out all documents not related to that department? 
    My apologies if this is long winded and confusing. Your help is most appreciative. 
    Cheers. 

    Hi,
    According to your post, my understanding is that you wanted to filter the corresponding documents from a Document Library when you selected a department in a List.
    I recommend that you can follow the steps as below to implement it in your environment.
    1. Create a new Web Part Page and add the Document Library and the List web part into it.
    2. Click the List web part, click the current web part’s drop-down arrow, choose Connections, Send Row of Data To, and then choose the Document Library web part.
    3. Click the Document Library web part, choose the “All Items” view from the Selected View, click the current web part’s drop-down arrow, choose Connections, Get Filter Values From,
    and then choose the List web part.
    4. Open the Configure Connection – Webpage Dialog, choose the “Department” column from the Provider Field Name drop-down list and choose the “Group” column from the Consumer Field
    Name drop-down list.
    5. Click Apply, OK button, save the Web Part Page and test it in your environment.
    For more information, you can refer to:
    http://office.microsoft.com/en-us/sharepoint-server-help/connect-data-in-web-parts-HA101785157.aspx
    http://www.dummies.com/how-to/content/connect-web-parts-in-sharepoint-2010.html
    Best Regards,
    Linda Li
    TechNet Community Support

  • "Open iPhoto 5 or higher to see photos from iPhoto Library in this list" ??

    This is a huge problem because I was in the middle of making a slideshow and then all of a sudden when I tried to choose a photo to put in the slideshow, it said "Open iPhoto 5 or higher to see your photos from your iPhoto Library in this list."
    The problem is, is that I'm using iPhoto 6.0.6 and that's definitely higher than iPhoto 5, if I'm not mistaken. I'm trying to upload a video on my facebook profile and it says the same thing. What do I do?
    This is what it looks like:
    http://tinypic.com/view.php?pic=zjx7xs&s=3
    Message was edited by: choyume

    choyume
    Two common causes of this issue:
    Is there a photo cd in your disk drive. If so, eject it and try again.
    Otherwise this can be a symptom of a damaged database:
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • I get this message when trying to upload pictures to craigslist via my media browser: open iPhoto to see photos from your iPhoto Library in this list

    Anyone know how to resolve this?  I have already repaired the iPhoto permissions and rebuilt the library but neither of these solved my issue.  I am using iPhoto '11 on a MacBook Pro.
    Thanks!

    Can you access the images with Image Capture (in your Applications Folder) ?

  • Have new iMac with iPhoto sharing turned on. When the shared library is clicked the library disappears or starts to load then disappears? What is wrong?

    Have new iMac with iPhoto sharing turned on. When the shared library is clicked the library disappears or starts to load then disappears? What is wrong?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then your current library is damaged and needs repair.
    Therefore  make a temporary, backup copy (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If you experience the same problem with the test library then try this basic fix a try:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that fails a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the source it came on originally.
    OT

  • IPhoto - problems viewing pictures from library

    I can view the thumbnails in the library but when I click on a photo to enlarge it or try to run a slideshow I just get a black screen. Any ideas?

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
    File ➙ Rebuild Library (iPhoto 8 or earlier)
    or
    Library ➙ Rebuild Library (iPhoto 9 or later)
    menu option to rebuild the library.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Has anyone seen this Dyld Error Message:   Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow   Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto   Reason: image not found

    Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found

    Yes, some perople have seen this. Options:
    1. Try reinstall iPhoto. (see below)
    2. If you have access to another Mac with the same version of the OS, try and copy that framework over
    3. Reinstall the OS.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.
    Regards
    TD

  • How can I move my old iPhoto library into a Referenced Library format and use that as my default?

    Hi, I have been using iPhoto for photo management where all the jpegs have been living, in organized events by date and subject for some time. I recently upgraded to aperture and am using the same iPhoto library. The issue I have is that I use Carbonite for my cloud back up and I am able to look at the pictures I have on my PC with the same folder organization I have them on my PC hard drive. This is apparently not possible for iPhoto library. The only way to access a picture on the iPhoto library in the cloud is to go through the master and hope you can find the specific picture since they are not organized in a comprehensible manner (like events or folders) in there.
    So the only solution I can think of is to move the current iPhoto library to a referenced image library and use that as my default library from now on. This way I get cloud access and the events will hopefully turn into folders with dates and subjects that I can continue to keep organized to satisfy my OCD tendencies.
    So the question I have is that:
    1. How can I make a reference Library for Aperture/iPhoto?
    2. How do I move the current library to the Referenced Library in an Organized manner? My wish list would be a series of folders labeled with the date and the subject, like I have in my iPhoto library right now.
    3. If there is any alternative, your suggestions and recommendations would be much appreciated.
    My computer: Mac Mini (Mid 2012), Lion, 16GB RAM.
    Thank you kindly,

    Or is there a way to go through aperture to make a new reference library that I can move the masters into later?
    you do not move the masters into a references library - you turn your current library into a referenced library.  As Terence Devlin said:
    File -> Relocate Masters
    What you should set up:
    Select a folder, where you want to store your referenced files - probably on an external drive.
    Decide on a hierarchical folder structure inside this folder - that is completely up to you.
    Select a project from your library and use the command "File -> Relocate Masters/Originals" to move the original image files to the folder where you want to go them to. Only take care not to send two projects to the same folder.
    Alternatively, if you do not care about the folder structure Aperture will use, select all images at once from the "Photos" view and let Aperture decide how to assing the folders - in the "Relocate Originals" dialoge you can specify a subfolder format.
    Regards
    Léonie

  • TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

    iPods (except for iPod touch) are not linked to any iTunes "account."  They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store.  It is not required to use an iPod.
    The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time.  When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased.  Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward.  You can then add content to your shuffle.
    The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store.  Just cancel out of that step, if iTunes asks.

  • I want to use The Duplicate Finder to get rid of duplicates in iphoto. I created a library as a folder on my desktop.  Should I trash the photos in iphoto before I run the duplicate finder?

    I want to use The Duplicate Finder to get rid of duplicates in iphoto. I created a library as a folder on my desktop and droped it into Dupe Finder.  Many dupes were found.  Before I have it auto select dupes, should I trash the photos in iphoto?  Or will Dupe Finder do that for me automatically?

    1 - if you want to remove duplicates from your iPhoto library you would not be using a copy of it
    2 - don't do anything without a good, current backup
    3 - reading the Duplicate Finder web site does not tell me tha tit is safe to use on the iPhoto library - i suggest you use one of the known good and tested duplicate eliminations programs - see this discussion for links - https://discussions.apple.com/message/24363132#24363132
    4 - One cardinal rule - NEVER make any chnages to the structrure or content of the iPhoto library using any porogram (including the finder) other than iPhoto - the programs listed in the linked discussion use iPhoto to do the deleting
    LN

  • Iphoto cannot see my old library or photo files

    in fact even finder can't see the jpegs but the old library icon shows 90GBs of content. If I look inside this using "show package content" i can see all the various iphoto folders and all the jpegs thumbnails etc. Really wierd. I've done a disk utility repair and removed and re installed iphoto but iphoto just opens a new library with no photos in. if i use "switch library" and select the library with 90GBs of potos it still just opens a new empty library. Any one got any ideas?

    - quit iPhoto
    - hold down your "control" key on your keyboard, and you should see a list of iPhoto Libraries, your computer sees.  Ensure you are connecting to the correct Library.  It's path is displayed under the box.  The one that displays as "default" is the one you are currently connected to.
    If you are connected to the correct library, yet still have this issue, likely we have a corrupt iPhoto Library.  We can attempt to fix this with iPhoto's First Aid.
    - quit iPhoto
    - hold down your "option + command" keys on the keyboard, and keep them held down while launching iPhoto.  This should launch iPhoto with a "first aid" screen over top of it.   Do each of these first aid steps, one at a time, until you have completed all the steps. 
    Let us know how that works

Maybe you are looking for

  • How do I convert a document created in Pages to a pdf file?

    How do I convert a document created in Pages to a pdf file?

  • Problem deploying entity ejb CMP

    hello when i deploy CMP entity bean in weblogic 5.1 i get an error "could not make connection to pool" i am using oracle thin driver. connection pool is created when i start the server but bean could not deploy please help thanx

  • Strange output generated after pasting some text into a reply

    Posted the following answer just now : http://social.technet.microsoft.com/Forums/en-US/a476247a-47ea-4545-ba26-2ba89595bba3/cannot-create-password-after-installation-windows-server-2012?forum=virtualserver in which I pasted a chunk of text from the

  • How to use mxf files with Premiere elements?

    Any ideas on how to use .mxf from my canon xf100 with elements? Also, I don't see a setting in the menu when I'm starting a project?

  • Error at the time of installation.

    Hi Experts,           I am installing the Web Application Server. At that time i am getting the error as ERROR 2007-05-31 18:11:32 FJS-00003  TypeError: (new FileMgt()).getNode(PropertyFileFullPath) has no properties (in script InstallationScript_21,