IPhoto no longer works with Nikon 5100 after upgrade to 10.8

IPhoto with newly installed Mountain Lion no longer recognizes a connection to my Nikon 5100. The USB cable is good, as it works with my other Macs -- OSX versions 10.6.8 and 10.7.4, just as it did with my Imac before I upgraded to 10.8. My Preferences are set to recognize any camera. I even upgraded to IPhoto 11 v9.3.2, but no help. Any ideas?

Hi, I have the same problem with my Nikon Coolpix 5000: camera is not recognized at all by Mountain Lion after upgrading: worked just fine with Lion.
Problem: I connect the camera, Mac (MacBook Pro Late 2011) freezes for a while (!!!) then external disk icon does not appear.
Console registers messages like the following:
20/08/12 19:34:24,000 kernel[0]: USBF: 363761.547 AppleUSBEHCI[0xffffff801fcbf000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
Strange thing is, my Coolpix 5000 is a very old camera with only USB 1 support: this problem occurs to me with every USB 1 device connected on Mountain Lion!
Hope they'll fix the problem or just find some workaround...

Similar Messages

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

I use Citrix Receiver to connect to my office systems when I work from home. The office systems are Windows 7 based and I work at home on a Imac. Up to yesterday everything worked like a dream. Then I upgraded from OSX 10.9.4 to 10.9.5 and sine then my keyboard has stooped responding when I am connected to my office system. When I close Citrix the keyboard works OK. I tried to connect using a MacBook still on 10.9.4 and there are no problems with the keyboard in Citrix. What do I do to get the keyboard to work under 10.9.5?

Citrix Receiver is upgraded to 11.9.0. http://discussions.citrix.com/topic/356870-receiver-for-mac-119-tech-preview-for -os-x-yosemite/
It works good together with OSX 10.10 Yosemite.
I think they did a great job releasing an update so soon after the release of Yosemite.
I upgraded to Yosemite on a mid 2011 iMac. It all performs better that OSX 10.9.5. No issues so far.

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

IHome no longer works with iPhone 4s after iOS 6.1 update.

My iHome no longer works with iPhone 4s after iOS 6.1 update. Prompts message 'This accessory is not supported by iPhone'. Has anyone come accross this and is there a fix?

Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

IPod Touch no longer works with car stereo after 4.0 update

I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

App Store Pages no longer works on Snow Leopard after upgrade

I bought Pages (and Numbers and Keynote) from the App Store last summer. I have been using it on Snow Leopard (10.6.8) with no problems up until a few weeks ago. Since then I must have told the App Store application to update all applications with updates (though I don't particularly remember doing that), and now when I attempt to open Pages I get a dialog box saying "You can't use this version of the application Pages.app with this version of Mac OS X. You have Mac OS X 10.6.8. The application requires Mac OS X 10.7.4". This is outrageous. How can a routine update of a App Store app stop it from working without any kind of warning? How do I revert to a version that will work on Snow Leopard? Don't just tell me that Pages isn't supported on Snow Leopard, because the version I bought last summer has been working just fine. Am I supposed to Google through pages and pages of information looking for warnings before I upgrade each application before updating? (I also own Aperture.) And what if I make a mistake and accidentally upgrade to a version that no longer works?

Which version of Pages 09 do you have? You don't need higher version than 4.0.4 on Snow Leopatd. Here you can download the iWork 9.0.4 update.

Images are not loading/not loading completely, persona previews no longer works with scrollover - even after complete uninstall/reinstall, but images work in IE - suggestions on how to fix this??

Images on websites often do not load or load incorrectly/incompletely load even after refreshing page and clearing caches. Often have to "clear recent history" 5 or 6 times within a single firefox session to get working links, images, completely loaded pages. The persona previews no longer do an "automatic preview" with a scroll over and now i no longer even get an image on the page to scroll over (images are just NOT THERE). I have done the safe mode test, have updated everything suggested, have checked all add ons as suggested in the troubleshooting guide and NOTHING shows as being a problem. I even did a complete uninstall and reinstall and it is STILL not working. Worried that it was an issue with my computer, i checked the pages in IE, and they worked PERFECTLY. I am uncertain what to do now. It started as a problem once or twice a week, and now it is EVERY time i bring up Firefox. Help?

the second article did offer a suggestion that SEEMS to have helped ::crosses fingers:: - an about:config, resetting of the preferences for images. we'll see how long it lasts. THANK YOU SO MUCH for the suggestion, the article wasn't one i'd found while searching for troubleshooting info.
Java script is enabled, but the persona's stuff still isn't working. dang it. WELL, one thing seems to work now, at least. thank you.
Pax, km

IPod Touch no longer works with I Tunes after connecting an IPhone 4

I have been using my Ipod touch on Itunes on my PC with no problems and then I plugged in my Iphone 4 for the first time and this was accepted. I then plugged in my Ipod again afterwards and I now get the error message saying ITunes cannot connect to this IPhone error OxE8000065

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Logic Pro no longer works with Firewire 1814 after updating drivers

I was attempting to hook up 2 M-Audio Firewire 1814 units and use them from Logic Pro 7. The older driver I was using would actually crash with this configuration, and so I updated to the latest driver, thinking this might solve the problem.
Well, the M-Audio driver now comes up fine - I can even monitor the signal levels coming from both devices in the associated UI. However, when I launch Logic Pro, I get the following message:
"Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers."
Although I can arm some of the lower track numbers (I still get this message), I cannot do so with higher track numbers.
Effectively, installing the latest M-Audio driver has broken my version of Logic Pro for whatever reason.
Removing and reinstalling the driver made no difference.
Any thoughts, anyone??
-- Brian
PowerMac Dual 2.5 GHz Mac OS X (10.4.8)

The M-Audio driver does not support 2 devices in Logic Pro.

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

Search no longer works in Bridge CS6, after upgrading computer.

I recently upgraded computers and reinstalled CS6. I can no longer search my files based on keywords or file name. What has happened? When I click on a file, the keywords are check, searching produces no results, just "no items to diplay". I even tried re-assigning some keywords, but still no results after search.
Any help?

Just my opinon: I find Bridge a little too daunting for my simple mind. I used to use iView, which I found very simple and easy to use. I may see if it's still around.
I'm not the one to judge your own qualification...:-)
However you are comparing two different things to my opinion and memory. iView was indeed a wonderful DAM application but had qualities Bridge does not have and vice versa. iView had its limitation as did Extensis Portfolio for me. I'm on a Mac and a few years ago I discovered that Canto Cumulus had a new Single user version. At the times of MacOS up to version 9 I used Canto to great satisfaction but they did not provide support for OSX 10 until recently.
While Bridge is not very reliable for use as a Digital Asset Management (to my opinion) Canto Cumulus is. But Canto is by far not as good at all the other tasks Bridge can do so I use Bridge up on to the moment the files are finished and ready for archive and I use Canto only for archiving purposes.
iView Media Pro has quit a history since. The developers had done a good tasks and decided to sell their baby. Unfortunately they did choose Microsoft as buyer. As often Microsoft did promise a lot and delivered nothing. The application (then renamed to Microsoft Expression Media) was killed softly. But Phase One regained the rights and called it: Phase One Media Pro.
Since I'm am a happy Canto user again I did not try this version but you can get a trial here:
http://www.phaseone.com/media-pro

Cannot work with Video Camera after upgrade to Flash Player 11

The latest flash play doesn't work well with the video camera on my Mac. I can't use Google Talk or Google+ Hangout now. The camera can work well with Skype, so it should be the problem related to Flash Player.
Anyone have similiar issue? Any fix?

I have the same issue and utltimately reverted back to 10.3 which works fine.
No matter what I did my video camera (built in isight) on macbook pro 2007 never turned on. Even though it asks me for permission to use it and I allow it too.
Here's what I tried:
1. Uninstall 10.3
2. Install 11
3. Uninstalling the Google Talk plugin (I saw posts on the net about a possible issues..but i never had this with 10.3)
4. Rebooting
Still nothing..black screen and no cam access.
I always use http://www.koowy.com for video cam conferences and had to go back to 10.3 to get my cam to work. I reinstalled Google Talk plugin and it all works fine with 10.3
Hopefully, this is a known issue and will be fixed.
I'm on OS X Lion, MacBook Pro (2007), Both FireFox 7 and Chrome and Safari 5.1 are effected.

Edit photo no longer works with 5.1.1 upgrade on iPad and iPhone ?

After 5.1.1 upgrade both iPad and iPhone shutdown and reset, help. Anyone else have this issue? Solution?

It was set up all the restarted, re booted whole nine yards..... I even restarted it a couple times since update... It's been a couple of days and it just stall and reboots when you try to edit any picture :( I also seem to be having many of the other update issues as others. Including battery % loss t higher rate and loosing phone service all togethere.....

Airplay only works with Photos App after upgrade to latest ios 6.1.3

I have upgraded both my iphone4s and ipad2 to ios 6.1.3 and now I dont see the Airplay icon on the Youtube App, Jasmine App, McTube App, Safari etc.
The only place I see the Airplay icon is when browsing photos and videos using the native ios photos app.
I have tried rebooting my iDevices, restarted my xbmc server, but to no affect. Why does it only show up in the native photos App??
Please help
Thanks

Still works fine for me, have you restarted your Apple TV and wifi router?

IPhoto no longer works with Nikon 5100 after upgrade to 10.8

Similar Messages

Maybe you are looking for