IPhoto not connected to internet after latest update
I just updated my iPhoto last night according to notification. Then, everytime I change desktop, either to LR3 or CS5 and return, iPhoto is no longer connected to the internet therefore, I cannot upload to Facebook, Flicker or email from iPhoto.
I have to close iPhoto, restart iPhoto, then its OK. How silly. It was never that silly before.
What's happened? Who made what change to the good code? Is there a fix?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it? If it does then try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Have you rebooted since this problem occurred?
OT
Similar Messages
-
HT4623 My iPad is not connecting to internet after software update what can i do
Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? PleaseYou can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords. -
Safari not connecting to internet after software update
I have just completed a software update and now safari will not connect to our wireless internet... airport says it has full bandwidth and other macs connected to the wireless connection are working without any fault.... has anyone got any ideas????
Thanks!!Hello Sarah:
As you probably have already guessed, quite a number of things might have happened.
My network is Ethernet, so I am not much help with wireless networks. However, I think I would (if I were you), run an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
An archive and install will place a fresh copy of OS X on your system while, at the same time, preserve your files, programs, and settings. It is always a good idea, however, to have a good backup strategy before any software changes. You should then run software update to bring your system to a current level (in your case, OS X 10.4.11 is current, I think).
The A&I should eliminate any system software issues.
Barry -
Can't connect to internet after latest update
Help.... ipad won't connect to the internet despite having full signal and being connected to home broadband, i know its not the connection as both iphones and macbook work fine..... was ok till i updated the software, anyone suggest anything?
HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn -
IPad Air can not connect to internet after updating to iOS8.
Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW
Other threads I've read have had people note that the following solutions have worked for them:
If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
Disable iCloud Drive.
I'm not saying that that any of these will work, but it's something to try (one at a time). -
IPhoto not connected to internet
I am getting the message that iPhoto not connected to internet. Why, internet working fine.
As I said I have seen that but only for a short time after launching iPhoto
Do you have any firewall or other IP control software installed like Little Snitch for example - those block certainl ports and can cause this
LN -
Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????
1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Cant connect to internet after ios6 update
cant connect to internet after ios6 update
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Not connecting to internet after installing os x mavericks. and thus i cannot complete setup
please help
today i installed mavrericks update and now my mac is showing new setup window. but it is not connecting to internet and i cannot sign in to apple account. and it seems like i lost all my data.. please help me. if i lost my data i will be killed.i feel like the new os is not installled properly. is there any way to reinstall it. do i have to download the os x again. please help me. i am in deep problemHave you looked here:
Re: osx Mavericks can't save scanned documents with hp scanjet -
I cannot connect to internet after I update system.
Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131msHi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35) -
Lenovo Y50 Not connecting to Internet after windows 10 update
Just as the title says.
I was able to install some windows 10 updates with wifi as my usb modem would not work
After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device managerAlso worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
JC -
W520 running Windows 8.1 not connecting to internet after sleep
Hey everybody, really need the help!
I have a w520 that suddenly stopped connecting to the internet after waking up from sleep. I will connect to the network and show others but the connection to the Internet times out. Once I restart I can access the Internet but as soon as it goes to sleep the problem happens again. I have tried on many different networks and at the beginning of the week this was not an issue.
Things I have tried:
different browser
different networks
reinstalling the drivers for the card
What else could be causing this sudden issue?Welcome FIMuPhi198
1. Go to Start > System Update > Install all critical and recommended updates.
2. Download and install the newer version of Wi-Fi driver from Intel.
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet -
Iphoto window is acting strange after latest update
After the latest update to iphoto, the window will not toggle to the front of any other open window when selected. I have to minimize all other open windows.
Help!Are you referring to iPhoto 9.4.3 on your Mac? If so try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Not connected to internet after sleep
Hi my Macbook Pro 13" early 2011 is not instantly connecting to the internet after sleep. I goto network diagnostics, all green lights are on, it says your internet is working fine, I click on a bookmark, it says I'm not connected. I repeat this two or three times, and finally after clicking on the third or fourth bookmark, it connects. I'm on Sky broadband UK through an Airport Express and my iPhone, Android (eeurgh!) 'phone, other computers and PS3 all connect with no problems. Any ideas folks?
Also whilst I'm here, I've noticed software update has downloaded the same EFI firmware update four times, and that other software updates are available immediately after updating software.... Something I'm not used to? And, during restart, the computer beeps. Normal?
Regards
mackersWell, thanks to Carolyn Samit from San Francisco I think I found the answer by deleting Cache.db from Safari prefs in the library... Haven't been on these boards for a few years now - forgot how to use them! Anyway, if anyone can help with the software update repeats before I search the answer that'd be great thanks!
Hi, nice weather
mackers -
Safari and iTunes not connecting to internet after 10.5.3 but firefox does
Hi,
My first post ever. I just updated to 10.5.3 from 10.5.2 After the update, I can not connect to the internet using Safari. I get an error message that I have no internet conection. I ran the network diagnostics and everything was reported as working correctly. I also ran a repair permissions from disc utilities. Still can not connect with Safari. I also noticed that itunes can not download any podcasts. My "software update" in system perferences can not connect either. Firefox has no problem going online.
Any suggesttions on how to proceed?
ThanksAlso worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
JC
Maybe you are looking for
-
I checked this out with Verizon tech and it was determined that the problem was with the Firefox browser. With Safari I have no problem forwarding e-mails. This box appeared for the first time on June 15. I have never seen it before. I still am able
-
Can xsu not be used to update more than one table at a time.
I would like to update two or more tables using the same XML package. However when I use XML that contains tags using column names from both tables I get an error that the second table's columns names can not be found in the first table even if I use
-
Restoring iTunes Backup onto my iPad
Hi, I recently updated my iPad from 4.0.1 to the new iOS 7.0.4. I had made a backup and transferred the apps to my iTunes library. After updating it, I selected the 'Restore from iTunes Backup'. It did restore but it left me on that page. Am I suppos
-
Combined reports: activities and contact person related accounts
Hello, I created a combined report that should show following things: Appointment data, all Related Users, all Related Contact Persons and the companies which are assigned to the Contact Persons (not the Appointment-related-Company!) I combined it by
-
Hi, I am not sure how to resolve or i don't how to approach this. i click on debug and view debug buttons still not able to find. What are these line numbers indicates. where to see them ORA-06512: at "SYS.WWV_DBMS_SQL", line 12 ORA-06512: at "APEX_0