IPhoto not found after OS reinstall and upgrade
I just bought a used Mac Mini to give to my in-laws. I used the original boot disks to reinstall the software. I then upgraded to Leopard. When all was said and done, evereything was wonderful except that iPhoto was nowhere to be found. Going back to the original install disks in Tiger I know it was included but apparently bundled. I can't ID and load it as a separate item. Suggestions?
Terence thanks for looking back at this thread. There is no iPhoto pkg or other iPhoto file on the hard drive following my upgrade to Leopard--just not there. I went back to the original Tiger install disks and went through the routine using only the 'bundled apps'. I could check the iPhoto app on the bundled apps list but when I reached the part of the install where it said 'insert disk 2' , I got a "install failed- no software found". I also tried just reinstalling the entire bundled apps folder and the same thing happened.
In the original wipe and reinstall of Tiger all the other Apple software came up fine.
Thank you again for your help.
Similar Messages
-
Scanner not found after HP driver and Mac OS X 10.5.5 updates
I had my HP C5180 All-In-One connected to my network and working fine with my iMac before the recent HP Driver and Mac OS X 10.5.5 updates from Software Update. I could print and scan with no problems. After the updates I get an error message from HP Scan Pro that there was a communication error and the scanner was not found. What's interesting is that if I start with the Scan Menu button on the printer I can get all the way to HP Scan Pro launching on my iMac before the error message appears. Apparently the iMac and C5180 see each other and can communicate.
I had this problem the last time both the HP Drivers and Mac OS X were upgraded through Software Update. HP Support's solution was to uninstall the entire HP driver software package and reinstall with the download from HP's site. That is **** poor and really unacceptable. I really just expect stuff not to break when Apple or HP suggest an update through Software Update. My philosophy of running Macs at home is that I don't have to think or work too hard to adminster them. This is proving me wrong on that idea.
Thoughts, comments, suggestions?I feel your pain brother. Just posted with the exact same problem. Looks like the "fix" is to uninstall/reinstall?
Yeah, they are definitely seeing each other as is the case with my setup. While it is a band aid and not fixing the problem, it you really really have to scan something, open up your browser and type in the IP address of your 5180. If you don't know it, you can find it by going into the configuration menu in the 5180 until you get to network. From there, you can scroll down to view settings for wired/wireless (don't know how you're connected to network). Once you get your IP address, type it in the browser. At that point the configuration page of the 5180 should come up. On the left, there is a application heading and under that a "webscan" feature. Click on that, then choose the option that applies to you. Once that's done, click preview. Once you see the image, right click on it and save it somewhere. If you hit the scan button, you will also save it, but it's anyone's guess to where it's saved to or what it's named. Again, not the ideal solution, but if you have to use it, then better than nothing.
FYI I have a C7280 so not sure yours will follow the exact same instructions, but should be close.
Good luck
The Swiss Gator -
After Leopard reinstall and upgrade can't order book
Had to do an erase and install yesterday and restored my harddrive from Time Machine. (My iMac hung on restart and that's the advice I got from support). Also did the 7.1.3 update.
Now, I can't order iPhoto books. It hangs on Connecting... when I hit order book, or, if I get past that, iPhoto will assemble the book and then hang when it tries to place the order and give me an error message about checking my network connections (it seems fine in other programs, but I'm not trying to upload a large file in anything else either).
Any ideas? I was hoping to order a book before the coupon expired tomorrow.
KarenKaren, Gale & Drowzy,
Am having the same "Network Connection Error" ever since last evening. I have contacted iPhoto/Photo Services Support HERE. and will post their response as soon as I hear something. I too am worried that the special discount will expire prior to our ordering. I have talked with an Apple tech, and he did acknowledge a problem. But he suggested that I post to the above for "exact" help. You may want to do the same.
Good Luck,
John -
CS6 photoshop not found after downloading and putting in serial number
CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me! -
Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #
CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!check your duplicate post. there are two responses.
-
Error message of "404 - page not found" after downloading and installing Firefox 15
Error message of "404 page not found" after downloading the latest version of Firefox.
This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].
-
My ical is not populating after i reinstalled my operating system - my Outlook 2011 is ok but I now want to sink my iphone 4 with my outlook and i presume i need ical to be populated for this
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier? -
cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,
my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message
Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
IMessage not working after iOS 5.1 upgrade! Feedback pls
iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......
You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes. -
I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460) -
Sibelius 7.5 can't find "sounds library", I reinstalled and upgraded as Sibelius online help suggested but to no avail. Anyone have any ideas? My display speakers do work.
Thanks,
JccnwmacOk, problem fixed, if not solved. A very helpful Apple tech walked me through opening terminal and entering a sudo command line that established my user name as the owner with owner access. Like magic, everything reverted back to original state of affairs.
Reviewing the console log of the error, it started when I tried to wake up the iMac from sleep with network access from another Mac, which should not have been a problem. This is in the category of "Who knows?" If there is a repeat, I'll come back here and post it. -
"CJS-30199 The CTC classes were not found after waiting for 900 seconds."
Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR 2007-05-10 20:19:48
CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
Visual Admin => Cluster => Server => Services => Deploy
Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny -
Battery #2 not present after windows 8.1 upgrade
battery #2 not present after windows 8.1 upgrade. I am using sony vaio laptop model VPCZ2390X
Hi aalmoeen,
Thank you for visiting Sony Community!
I assume your computer has an extended battery pack, right? Are you using a genuine Sony battery packs? Please follow these steps to isolate the issue:
Power Cycle
Turn off the laptop -> push and hold the battery off button for 5 seconds located on the bottom of the laptop. (You may use safety pin).
Remove the battery pack and install it once again. Test the laptop again.
Remove the battery pack -> push the battery off button -> install the battery pack once again.
Reset BIOS
Run Vaio update and Windows update.
Make sure you have the updated drivers and software, check on eSupport website.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these steps help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available
Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?
Maybe you are looking for
-
How to create Word file and send file in mail as an attachment
Hi Guys, I want to create report which fetech data from table and create word file of the same data and send file in mail as an attachment.
-
Hi, everytime i wonder how picture do to make their picture having the same tint over their pictures... for example i have picture in Black & white color, or in colors and i would like to make them like everything is blue... basically i would like to
-
WEB DESIGNER - HTML SCANNER TRANSACTIONS
I am doing an update in one single class named IRC_IO and once i press the UPDATE button, it raises this exception : ExpressConcurrencyException caught while executing EXECUTE tag named IRC_SystemIOHandler.ProcessAction Original message: The Business
-
"Elements Organizer 12 has stopped working"
I bought PSE12 to fix this problem I had with PSE11, but it didn't, Immediately after accessing PSE12 Orhanizer, I get the Windows message saying "Elements Organizer 12 has stopped working". It then forces me to close the program.
-
Can I attach a third-party SCSI disk array to my CE-565 ??
as title