IPhoto not printing to Canon MG 3200 Series

I cannot print any images from iPhoto to my Cannon MG 3200 printer. I can print other documents just fine. But even if I insert the image into a Word doc, it still will not print. I get a message saying the printer is offline and not connected, but it works fine for other docs. Any suggestions appreciated.

I had a similar problem, which was because I had two versions of the printer installed (USB and wireless).
When you select print, you get an initial dialogue box to select your Canon MG3200.  Make sure you select the wireless one (second option for me).  A second dialogue box with printer options also shows up.  Make sure this is also the wireless printer (again, second option for me).
I was getting the offline error because I was only changing the printer in the first dialogue box, but not the second one.

Similar Messages

  • Can't print to Canon MP 250 series, installed drivers

    Hi from Cairo,
    I'm running OSX 10.8.2 and I'm trying to install a Canon MP 250 series printer. I've downloaded and installed the driver twice, gotten the "installation successful" message, but still nothing will print. This is the error message I found in the logs:
    E [01/Mar/2013:12:16:36 +0200] Canon_MP250_series: File "/Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacO S/Command2CanonIJ" not available: No such file or directory
    Your kind support is deeply appreciated.

    Latest drivers:
    http://support.apple.com/kb/DL899
    Then setup printer in Print & Scan

  • IPhoto not printing properly to P-10

    I downloaded the correct driver for my Olympus P-10 digital printer, and iPhoto recognizes it. The printer prints fine directly from the camera, however, when I try to print an edited photo from iPhoto 5.0.4, the full image does not print. A portion of it does, depending upon what constraints I have set in the edit process. I've tried multiple configurations of restraints to no avail. So far, the closest acceptable print is to set the layout to "N-up" which essentially prints four 4X6 photos to a page, but even that is not as good as it should be. What am I doing wrong in iPhoto?
    Thanks in advance.
    ibook G4   Mac OS X (10.3.9)  

    IPhoto does not support printer

  • IPhoto not printing

    since updating to 7.1.3 iPhoto - cannot print. I get a message saying: "There were no themes located. Until at least one theme has been installed, this feature will be unavailable."
    In Application Support I have the iPhoto themes. Don't know what to do.

    Welcome to the Apple Discussions.
    Restoring iPhoto Themes
    First look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation process described below:
    1 - delete the current application.
    2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
    3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder. Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
    5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
    After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Printing to Canon ImageRUNNER 3200 network color printer

    Hi folks,
    I'm the lone Mac user working in a corporate Windows environment. I've succesfully been able to use IP addresses to print to various HP printers, but I'm so far unable to print to the aforementioned Canon ImageRUNNER 3200 color laser printer. I downloaded Canon's driver for Mac OS 10.1/10.2/10.3/10.4 and tried adding it to the printer center as an IP printer but it won't print. Then I tried adding it using Canon's IP printer utility (I saw it in the pull down menu from the print center) and that doesn't work either. It seems to see the printer on the network, but just won't print. Any suggestions would be greatly appreciated.

    I was doing some Googling and saw the device Queue Name for ImageRunners is "print." Try entering that in Printer Setup.

  • I could not print using Canon MF8300C Series with Yosemite 10.10.1

    After download and installing, I am not able to print using MF8300C Series. Help anyone?

    So assuming that you have downloaded and installed the Canon MF Driver v10.3.0, have you been able to add the printer in Printers & Scanners? And if yes, does this printer go through the motions as if it is going to print that then fails?

  • MacBook Pro 5.3 does not print to Canon iR C5180

    I'm writing on behalf of my coworker who has a MacBook Pro 5.3 with Snow Leapard (10.6.2) has not been able to print to our Canon iR C5180. Our IS team had Ikon/Canon come out and upgrade software on the printer and also, they have found the latest drivers (Canon iRC5180 UFR II (US)) and installed them on her MacBook but it doesn't still work. We are very frustrated!
    A generic driver did print for a while, but now we can not get any generic drivers to work either. The Canon iR is used by a majority of PC/WIN folks in our network so us few apple users (only 3) are rare. My Dual 2 Ghz PowerPC, 10.5.8 works fine with an older driver -H1 PS Ver 1.0
    Any ideas??

    Louis123 wrote:
    Yes, our iR C5180 does have the imagePASS-H1 connected. I also forwarded your message to our IT support person and they stated,
    "The UFR2 driver is the only one that supports PINs. Any other driver won’t be able to print in color because of that."
    This is not true. The H1 does support PINs (called Department ID management on the copier). With the H1 v1.0 driver, you use the Owner Information menu to enter the Department ID and Password set in the copier.
    The other thing they need to be aware of is that the UFR2 driver will not work when the imagePASS is connected. The UFR2 driver is designed for the Canon board only. Once the imagePASS is fitted, the Canon board is taken out of the RIPping process.
    To ensure the SL user gets the correct driver to match the system version being used on the imagePASS, they can connect to the H1 by typing in it's IP address into a web browser. From the H1 web page, they select the Downloads tab and here they will see the H1 PS driver for Mac OS X.
    With this driver downloaded onto the SL Mac, there are now several things needed to get this driver installed and working correctly.
    *Driver Installation*
    In order to run the EFI installer on Mac OS X 10.6, you need to have the Rosetta emulator installed. This is due to the EFI driver installer being written in PPC code. A default install of Mac OS X 10.6 will not add the Rosetta emulator, so when you attempt to install the driver a message will appear asking if you want to install it. Click the Install button.
    On a Mac that has a connection to the Internet, Rosetta will be automatically downloaded and installed before the initial execution of the Fiery printer driver installer. If the Mac has no access to the Internet, the user will need to load their Snow Leopard DVD and manually run the Optional Installs package.
    *Printer Queue Creation*
    With the printer driver installed, you can now create a network print queue. Click to Add and select IP > HP Jetdirect-Socket for the protocol. In the Print Using menu, select "Canon iR C5180-H1 PS Ver1.0".
    With the printer queue created, when you attempt to print using the driver an error message appears stating that the software was not installed correctly. The error message displayed is caused by a permissions issue with a EFI plugin, fierycupsfilter. The CUPS error log confirms the cause of the error;
    Filter "/Library/Printers/Canon/PS3/Filters/fierycupsfilter" for printer "CanoniR_C5185_H1_PS_Ver10" not owned by root
    EFI have released a patch that will change the permissions on the PS3 folder to stop this error from occurring. This patch is designed to work with the System 6 and later RIPs whose driver installer creates this PS3 folder. The patch can be downloaded from EFI.
    http://services.efi.com/support/drivers/download2.asp?oem=efi&sys=Applemac_osx106&ver=NA
    *Driver PDE Plugin Incompatibility*
    Now that you have managed to install the driver and print without the error message appearing, another issue may appear when printing from 64bit applications, such as Safari and Preview.
    When you select to print and change the print dialog menus, you will see a line through the Fiery option (known as stike-through). This is the result of using a 64bit application with a 32bit plugin. The solution is to set the 64bit application to open in 32bit mode via the Get Info function for the 64bit application.
    Hope this helps you with getting your colleague printing from Snow Leopard. Of course, reply if needed.
    Pahu

  • IMac, iPhoto not printing correctly

    I have an iMac and print to a Canon ip4200 wirelessly. I bought the printer from Apple with my iMac and have tried to print 4x6 photos to the printer but it doesn't print correctly. I went through the print setup in some detail choosing the canon printer, the media (Canon 4x6 photo paper), yet the preview window comes up with red text that it cannot be setup to print like this. I have double-checked the canon manual and the paper is in the tray correctly. What am I doing wrong?
    Thank you
    Clyde

    It's probably a setting in iPhoto that is causing it. I don't know about the later versions of iPhoto as I am still using version 4.03 but if I remember correctly one thing you have to do is to crop the photo to 4 x 6 and then make sure the settings in both iPhoto and your printer match.
    You may have more success asking this question in the iPhoto forum as that is where the real gurus for that application hang out!
    http://discussions.apple.com/category.jspa?categoryID=143
    Good Luck!

  • Iphoto not printing full photo, cropping some photos

    After I create a photo with pixilmator or any horizontial and export to iphoto, I can see the full photo, but when i print it cuts off the edges and only prints the middle.  I have tried selecting different sizes, changing horizontial view to vertical view, nothing works.  I had to print and send a copy of a licence, similar to a car registration format, and that too had the ends cropped out.  Please help.  so far i have to print photos from the pixilatore program or and adobe program, no problems there, only have problems with iphoto.  using epson stylus nx420.  Please help

    As noted in the other thread you posed this question in you must crop the photo to the print ratio and then print - iPhoto does not "autosize" photos - if you try to print a 8x12 photo on 8x10 paper you will lose 2 inches - you have to precrop the photo to the size you want to print
    LN

  • IPhoto not printing photo as shown

    Just got the miniMac. iPhoto is cropping some of my photos in the preview and the print - isn't showing the photo as was cropped by me. any help?

    Mulevaline:
    Welcome to the Apple Discussions. Are you cropping the photos to the size you want to print before trying to print? What size are you aiming for and how are you going about it?
    Happy New Year
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • De-noise on iPhoto not working with Canon camera pictures

    When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture.
    I tried diffrent stuff to see what works and what does not:
    - If I use a picture taken from iPhone / iPad, in iPhoto de-noise works
    - If I take a professional picture, send it to my iPhone and resend it on my Mac, the de-noise will work
    - If I use a professional picture on my Mac desktop, de-noise works as well.
    Just not in that initial circumstance ... Strange !! Help ?!

    How does this
    When I try to use the de-noise option in iPhoto on some pictures taken with a professional camera (Canon), it does not de-noise the picture
    differ from this?
    - If I use a professional picture on my Mac desktop, de-noise works as well.
    OT

  • Win XP does not print via Canon MP970 via Airport Extreme

    OK, I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop via airport extreme. Any help would be greatly appreciated!

    OK, I kept working at it and seemed to have fixed the problem. I finally just redirected the port to a local one "9101"and not the 10.0.1.1 and began working. I am not sure what I did definitively to make it work. And I just installed the latest printer drivers into my PB G4 and new blackbook and worked. I really just need to trash the PC and go with Apple but you know.......wife.....$$$$$, etc....

  • Aperture / iPhoto not recognizing CR2 Canon Raw anymore

    hello all,
    ive been using lightroom to manage my photos which are a CR2 Canon Raw from my Canon 5D Mark II. I recently decided to try out aperture and see if id like it better since i do use iPhoto to manage all of my simple little snapshots from my point n shoot. iPhoto seemed to be working with my raw format images but i recently updated my cameras firmware to 1.0.7 from 1.0.5 and iPhoto will no longer recognize the format. I think i had the camera raw 2.4 update but i went on the apple site and got 2.5 and reinstalled it just in case and my camera is in the listed ones supported but now i get the same error in iPhoto and in Aperture but lightroom can still import them. Is anyone else experiencing this or have a possible solution to it?
    Thanks.

    ive discovered the problem. my camera can shoot raw in 3 different resolutions and iphoto / aperture will only accept the original highest quality raw (which is 21mp) so there must be some slight difference in the other size formats. this needs to be fixed apple since i shoot a lot of random photos in a raw format at a smaller resolution. it works in lightroom.

  • CS5, Mavericks OS, Pshop crashes on print settings, Canon iP4820

    New Mac, on Mavericks OS: Photoshop CS5 will not print to Canon iP4820, quits every time I click print settings. Will print low quality.

    Contact Canon to get updates to fix bugs in MacOS 10.9.
    And make sure you have the OS and Photoshop updates installed.

  • After upgrading to Maverick I can print from Canon IR5050. Downloaded new driver from Canon site with no luck.

    I can not print from Canon IR5050 after installing Maverick. I downloaded new driver from Canon with no luck.

    I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
    J.

Maybe you are looking for